发动机新型电控系统的故障诊断的研究与开发

介绍了上海交通大学内燃机研究所研制的汽油机新型电控系统中的故障诊断部分的硬件组成及软件实现 ,包括CONTINUE诊断、KOEO诊断、ER诊断、OUTPUT诊断及喷油平衡诊断等 ,给出了程序总的流程图 ,详细介绍了故障诊断的原理、故障代码的输出及处理等。试验证明 ,此故障诊断能检测出发动机电控系统中的常见故障     

混合动力电动汽车的发展

混合动力电动汽车是当今解决汽车节能与排污问题的有效途径，本文阐述混合动力电动汽车的不同型式和特点，以及目前混合动力电动汽车的发展现状，指出发展混合动力电动汽车必须解决的关键技术问题。     

解放牌CA1111P1K2L7型柴油载货汽车起动系统电路故障诊断与排除

解放牌CA1111P1K2L7型柴油载货汽车起动系统电路中增设了DK238型电源总开关和断油电磁铁，该装置具有电源电路和起动电路的保护作用，介绍了该起动系统电路的结构及工作原理，以及该电路的常见故障与诊断。     

地铁电动车组的VVVF逆变器控制系统

本文简述了交流传动系统应用于城市地铁交通的优越性，分析了主电路及控制电路的原理，并对其具体实现办法进行了初步探讨。     

At-sea towing of a Mega-Float unit

A huge floating offshore platform (359m long, 60m wide, and 3m deep) was towed into the Pacific Ocean for a validation experiment for a floating airport. Full-scale measurements of towline tension and the bending strain on the upper-deck were made during towing. The measured bending moment agreed well with numerical calculation without taking the draught and towing speed into consideration.     

Stress intensity factor measurement of cracks using piezoelectric element

A stress intensity factor (SIF) measurement method for cracks using a piezoelectric element and an electrostatic voltmeter is presented. In this method, an isotropic piezoelectric element is first attached near the tip of the crack. Then surface electrodes are attached to three different positions on the piezoelectric element. The electric potentials of the surface electrodes, which are proportional to the sum of the stress ( _x + _y ) on the structural member, are measured by an electrostatic voltmeter during load cycling. The mode I and mode II SIFs of the crack are estimated using the relationship between the SIF and ( _x + _y ). The applicability of the proposed method is examined through experiments and numerical analysis.     

Optimizing the locations of electric taxi charging stations: A spatial–temporal demand coverage approach

Vehicle electrification is a promising approach towards attaining green transportation. However, the absence of charging stations limits the penetration of electric vehicles. Current approaches for optimizing the locations of charging stations suffer from challenges associated with spatial–temporal dynamic travel demands and the lengthy period required for the charging process. The present article uses the electric taxi (ET) as an example to develop a spatial–temporal demand coverage approach for optimizing the placement of ET charging stations in the space–time context. To this end, public taxi demands with spatial and temporal attributes are extracted from massive taxi GPS data. The cyclical interactions between taxi demands, ETs, and charging stations are modeled with a spatial–temporal path tool. A location model is developed to maximize the level of ET service on the road network and the level of charging service at the stations under spatial and temporal constraints such as the ET range, the charging time, and the capacity of charging stations. The reduced carbon emission generated by used ETs with located charging stations is also evaluated. An experiment conducted in Shenzhen, China demonstrates that the proposed approach not only exhibits good performance in determining ET charging station locations by considering temporal attributes, but also achieves a high quality trade-off between the levels of ET service and charging service. The proposed approach and obtained results help the decision-making of urban ET charging station siting.     

地铁车辆段地下固定式架车机组设计接口与包容性分析

地下固定式架车机组是地铁车辆段的关键设备,介绍地下固定式架车机组的功能及组成,分析该设备在地铁车辆段土建及各系统设计时与各专业的接口,并提出设计时各专业间的设备界面划分,论述地下固定式架车机组的包容性设计,保证其施工图设计的顺利开展。     

Real-time model predictive control of connected electric vehicles

ABSTRACT

Electric Vehicles (EVs) motors develop high torque at low speeds, resulting in a high rate of acceleration with the added advantage of being fitted with smaller gearboxes. However, a rapid rise of torque in EVs fitted with central drive powertrains can create undesired torsional oscillations, which are influenced by wheel slip and flexibility in the halfshaft. These torsional oscillations in the halfshaft lead to longitudinal oscillations in the vehicle, thus creating problems with regard to comfort and drivability. The significance of using wheel slip in addition to halfshaft torsion for design of anti-jerk controllers for EVs has already been highlighted in our previous research. In this research, we have designed a look-ahead model predictive controller (LA-MPC) that calculates the required motor torque demand to meet the dual objectives of increased traction and anti-jerk control. The designed LA-MPC will improve drivability and energy consumption in connected EVs. The real-time capability of the LA-MPC has been demonstrated through hardware-in-the-loop experiments. The performance of the LA-MPC has been compared to other controllers presented in the literature. A validated high-fidelity longitudinal-dynamics model of the Rav4EV, which is the test vehicle of our research has been used to evaluate the controller.     

钢网面板加筋土挡墙动力特性试验的变形研究

基于泥质红砂岩粗粒土填料，采用MTS分别模拟地震荷载、交通荷载、加-卸载多循环荷载进行大尺寸模型试验，研究了钢网面板土工格栅加筋土挡墙在上述荷载作用下的动力特性，获得了不同峰值的水平地震激励下模型挡墙不同位置的水平动位移、竖向动位移峰值响应等实测值；采用不同频率、不同幅值的竖向交通荷载正交试验法，获得了该模型挡墙在重复荷载作用下的最大水平变形、最大沉降量及位置等动力特性参数值；通过7种荷载、21组加卸载循环试验，获得了加一卸载多循环荷载作用下的实测沉降值。试验结果表明：该加筋结构具有整体变形的特性，是优良的抗震结构，能承受抗震设防烈度为9度的地震荷载；同时该加筋结构具有良好的稳定性和抗破坏性，重复荷载的幅值和振动次数对结构动力变形特性的影响较大，而振动频率对变形特性的影响不显著；多循环荷载作用下该加筋结构能够明显减小不均匀沉降。过长的筋材并不能明显地改善加筋土挡墙的动力特性。