城市轨道交通列车控制仿真模型研究

列车运行控制系统的应用,有效地提高了城市轨道交通的运行效率.由于缺乏相关的技术参数,应用传统牵引计算理论方法的列车运行控制仿真系统,若未充分考虑系统控车的特性,在工程应用中控制的精度将无法保证.本文着重考虑信号系统工程设计的限制条件,将列车的加减速性能和速度控制策略作为主要研究对象,构建基于能量守恒原理和信号控制条件的列车速度控制仿真模型.在此基础上设计仿真模型,实现所需要的系统功能结构和仿真流程,并开发形成软件系统.在实际运行线路案例研究中,与采用通用列车运行仿真系统获得的结果比较,验证本文所建仿真模型的精度和工程适用性.     

基于历史保护的老城区公共交通改善研究

受历史保护等诸多因素制约,我国许多城市的老城路网条件较差,交通拥堵严重,公共交通发展水平滞后。如何改善老城交通环境,构建宜居、活力、创新的老城,是社会各界共同关注的焦点。文中以佛山老城为例,提出基于历史保护的老城公共交通改善策略。对公交线网、公交场站、公交资源整合、配套管理等方面进行了研究。     

杭州湾跨海大桥南航道桥钢锚箱施工技术

杭州湾跨海大桥南航道桥为A形独塔双索面钢箱梁斜拉桥,索塔锚固区采用混凝土结合钢锚箱结构,此结构形式在我国尚属新工艺。文章主要介绍了南航道桥钢锚箱安装施工工艺、施工难点及解决措施。结果表明,其轴线偏位、高程、垂直度等全部满足规范要求。     

雾化液滴尺寸和速度分布函数的推导

为了增强雾化液滴质量和热量的传递,有效预测与评价喷雾质量,应用最大熵原理和动量守恒定律推导出了新的雾化液滴尺寸和速度的概率密度分布函数,包括数目分布函数、数目微分分布函数、体积分布函数、体积微分分布函数与总体积公式。当不考虑速度分布时,推导的喷雾液滴尺寸分布与曹建明先前推导的尺寸分布具有完全相同的形式,其分布函数是Nukiyama-Tanasawa型雾化液滴尺寸分布函数的一种特定形式,推导结果具有普适意义。     

Energy-aware control for automated container terminals using integrated flow shop scheduling and optimal control

The performance of container terminals needs to be improved to handle the growth of transported containers and maintain port sustainability. This paper provides a methodology for improving the handling capacity of an automated container terminal in an energy-efficient way. The behavior of a container terminal is considered as consisting of a higher level and a lower level represented by discrete-event dynamics and continuous-time dynamics, respectively. These dynamics represent the behavior of a large number of terminal equipment. The dynamics need to be controlled. For controlling the higher level dynamics, a minimal makespan problem is solved. For this, the minimal time required by equipment for performing an operation at the lower level is needed. The minimal time for performing an operation at the lower level is obtained using Pontryagin’s Minimum Principle. The actual operation time allowed by the higher level for processing an operation at the lower level is subsequently determined by a scheduling algorithm at the higher level. Given an actual operation time, the lower level dynamics are controlled using optimal control to achieve minimal energy consumption while respecting the time constraint. Simulation studies illustrate how energy-efficient management of equipment for the minimal makespan could be obtained using the proposed methodology.     

An analysis of trends in passenger and freight transport energy consumption in India

This primary objective of this paper is to examine the causes for the change in energy consumption in the transport sector in India. The pattern of energy consumption and their causes for change are benchmarked against select countries. A mathematical model that decomposes changes in energy consumption to various factors has been used. The changes in the energy consumption are attributed to growth in transport volume, structural change or modal shift, and energy intensity. The analysis is conducted for passenger and freight transport separately. Results indicate that the growth in transport volume has been the main cause for increase in energy consumption for both passenger and freight transport in India despite the decline in energy intensity of various transport modes. Though not surprising for a growing economy like India, this poses a challenge for the future. Currently, India is a low carbon economy.     

基于USB接口的电力机车能耗记录与分析系统

以C8051F单片机作为中央处理器,采集电参数计量模块和TAX2型机车安全综合监测装置的信息,生成并存储电量消耗记录;通过USB盘转储数据到地面进行处理和分析。系统整体设计具有模块化、准确可靠的特点,对电力机车节能降耗措施提供合理的依据。     

汽车馈能式电动主动悬架控制器设计与试验研究

针对直流无刷电机结合滚珠丝杠结构作为电机作动器的汽车馈能式主动悬架,设计了其电机作动器的电子控制系统。该控制系统的硬件部分由DSP控制器、驱动及功率模块和DC-DC电源供应模块3个模块构成;软件部分采用了基于μC/OS-Ⅱ实时多任务操作系统的控制算法。分别对所研制的电动主动悬架与原配液压被动悬架进行整车试验,研究了电动主动悬架的随动特性及馈能可行性。     

龙江—斯太尔汽车铸造桥壳设计

用本文采用的计算大圆角矩形桥管W方法计算斯太尔桥管W与斯太尔工厂提供的W数值极为相近。利用QT42—10球铁桥壳P—σ_u—N_(50)弯曲疲劳曲线估算出桥壳台架试验要求寿命N_(50)=80万次时的应力σ_u,并按台架试验加载工况计算出桥管必需的W,再利用创立的计算大圆角矩形桥管W方法确定桥管的截面尺寸,设计出了龙江—斯太尔汽车轻量化的铸造桥壳。     

汽车碰撞台车模拟试验吸能器的研究

介绍一种钢筋阻尼吸能器,经过理论计算,该吸能装置可通过调节钢筋的种类、数量、长度和放置方式,复现不同车型、不同碰撞车速条件下的车身减速度波形,可广泛用于汽车安全部件的开发及试验验证。