连云港庙岭三期突堤砂被堤工程施工工艺

根据连云港庙岭三期的特殊情况,采用了砂被筑堤法。介绍了连云港庙岭三期突堤砂被堤工程的概况,从砂桩打设、吹填砂被模袋混凝土护坡等几个方面介绍了砂被堤施工的工艺流程。陈述了施工中出现的技术问题和解决方法以及对原施工工艺的改进。这一工艺取得了良好的施工效果。     

燃烧室外冷却热防护数值模拟研究

本文建立了夹套式外冷却燃气发生器燃烧室热防护的CFD数值模拟模型,并用该模型对影响热防护效果的各因素进行了研究。用有限容积法离散二维轴对称N-S方程,用标准k-ε模型模拟湍流,用可压缩耦合求解器求解控制方程。研究了燃烧室内壁材料热导率、燃烧室内壁壁厚以及冷却水流量对热防护效果的影响。结果表明材料热导率对热防护效果的影响较大,高热导率的材料能够明显降低燃烧室内壁壁温和温度梯度;当燃烧室内壁为高热导率材料时,壁厚和冷却水流量对热防护效果的影响相对较小。     

块石基床爆夯技术在重力式码头的应用及质量控制

爆夯技术近年在重力式码头抛石基床上得到广泛应用,本文结合福建某重力式码头基床、地基及水文的实际情况,总结块石基床水下爆炸夯实技术的设计、施工工艺、质量控制及爆破的安全控制,以供类似工程参考。     

高速公路长大纵坡沥青路面施工技术研究

在山区修建高速公路,将面临较平原区更严格的要求。结合当前山区高速公路施工的现状,就山区高速公路长大纵坡路段的施工技术进行了探讨。     

Seasonal and interannual variation of physical and biological processes during 1994–2001 in the Sea of Japan/East Sea: A three-dimensional physical–biogeochemical modeling study

A Pacific basin-wide physical–biogeochemical model has been used to investigate the seasonal and interannual variation of physical and biological fields with analyses focusing on the Sea of Japan/East Sea (JES). The physical model is based on the Regional Ocean Model System (ROMS), and the biogeochemical model is based on the Carbon, Si(OH)₄, Nitrogen Ecosystem (CoSiNE) model. The coupled ROMS–CoSiNE model is forced with the daily air–sea fluxes derived from the National Centers for Environmental Prediction (NCEP) and the National Center for Atmospheric Research (NCAR) reanalysis for the period of 1994 to 2001, and the model results are used to evaluate climate impact on nutrient transport in Mixed Layer Depth (MLD) and phytoplankton spring bloom dynamics in the JES.The model reproduces several key features of sea surface temperature (SST) and surface currents, which are consistent with the previous modeling and observational results in the JES. The calculated volume transports through the three major straits show that the Korea Strait (KS) dominates the inflow to the JES with 2.46 Sv annually, and the Tsugaru Strait (TS) and the Soya Strait (SS) are major outflows with 1.85 Sv and 0.64 Sv, respectively. Domain-averaged phytoplankton biomass in the JES reaches its spring peak 1.8 mmol N m^− 3 in May and shows a relatively weak autumn increase in November. Strong summer stratification and intense consumption of nitrate by phytoplankton during the spring result in very low nitrate concentration at the upper layer, which limits phytoplankton growth in the JES during the summer. On the other hand, the higher grazer abundance likely contributes to the strong suppression of phytoplankton biomass after the spring bloom in the JES. The model results show strong interannual variability of SST, nutrients, and phytoplankton biomass with sudden changes in 1998, which correspond to large-scale changes of the Pacific Decadal Oscillation (PDO). Regional comparisons of interannual variations in springtime were made for the southern and northern JES. Variations of nutrients and phytoplankton biomass related to the PDO warm/cold phase changes were detected in both the southern and northern JES, and there were regional differences with respect to the mechanisms and timing. During the warm PDO, the nutrients integrated in the MLD increased in the south and decreased in the north in winter. Conversely, during the cold PDO, the nutrients integrated in the MLD decreased in the south and increased in the north. Wind divergence/convergence likely drives the differences in the southern and northern regions when northerly and northwesterly monsoon dominates in winter in the JES. Subjected to the nutrient change, the growth of phytoplankton biomass appears to be limited neither by nutrient nor by light consistently both in the southern and northern regions. Namely, the JES is at the transition zone of the lower trophic-level ecosystem between light-limited and nutrient-limited zones.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

T型焊接接头疲劳性能研究

T型焊接接头在船舶与海洋工程结构中广泛应用,研究T型焊接接头的疲劳性能对于提高船舶与海洋工程结构的强度具有重要意义.针对工程中常用的四种焊趾形式的T型焊接接头,利用有限元计算和模型试验两种方法对其疲劳性能进行了研究.结果表明,平面型焊趾是较优的T型接头焊趾形式.     

船舶舱室环境热舒适性控制新技术综述

船舶舱室环境热舒适性是影响船员身体健康和工作效率的重要影响因素,发展合适的舒适性控制新技术以创建良好的舱室环境热舒适性是船舶通风空调系统的主要任务.该文对船舶舱室环境热舒适性控制新技术进行总结和综述,对船舶舱室环境热舒适性控制新技术的发展具有一定的借鉴意义.     

援潜救生系统装备概况

援潜救生是复杂的系统工程,在提倡立体救援的新形势下,各种援潜救生装备的配套使用,扬长避短,协同作战,才能真正满足援潜救生的要求,文章主要论述援潜救生装备的分类及深潜救生艇的技术性能分析类比.     

生态系统分析方法与农业科技示范园规划

现代农业科技园区建设规划目标是实现经济、生态、社会效益的协调,园区是一个复合的人工生态系统。在规划过程中的一个核心环节就是进行生态系统分析,并在分析的基础上进行生态系统设计。文中讨论了农业园区生态系统分析的目标、步骤,并提出了科技园区的复合生态系统由4个子系统组成,分别是：安全永续的生态环境资源子系统、清洁循环的生态产业经济子系统、自然和谐生态人类住区子系统、先进高效的科技支持和管理决策子系统。