轿车扭杆式半独立后悬架动力学仿真和试验研究

结合轿车扭杆式后桥的等效刚度力学模型、后悬架非对称橡胶衬套的变形耦合特性以及减振器、螺旋弹簧的力学模型,建立轿车扭杆式半独立后悬架的等效动力学模型。对模型进行仿真分析和试验研究,通过对比表明仿真和试验的结果具有较高的一致性。     

基于遗传算法的车辆悬架系统等效物理参数识别

针对车辆悬架系统的功能及物理特性,以车轴的运动为系统输入,对复杂的整车行驶模型进行了合理简化。以某型专用越野车辆为例,建立了簧载质量的3自由度振动模型,推导了簧载质量任意位置处的加速度频响函数;利用汽车试验场道路测试数据,通过遗传算法编写VC程序进行了数据拟合,得到了悬架系统在不同路面工况下的等效物理参数。实际应用表明,拟合结果具有较高的可信度。     

热敏电阻特性的线性化方法

讨论几种负温度系数(NTC)热敏电阻特性的线性化方法。首先,论文中会介绍一些关于NTC热敏电阻的理论知识和特性曲线。然后,会介绍几种模拟线性化方法。最后,电阻模式线性化和桥梁网络线性化方法将被详细讨论并在软件LTSpice和MATLAB上分别进行模拟,通过实验模拟来验证这两种线性化的实际效果,并进行比较。     

Benchmark study on slamming response of flat-stiffened plates considering fluid-structure interaction

This paper presents a benchmark study on the slamming responses of offshore structures’ flat-stiffened plates. The objective was to compare the fluid-structure interaction (FSI) simulation methodologies, modeling techniques, and established researchers' experiences in predicting slamming pressure. Three research groups employing the most common commercial software packages for numerical FSI simulations (i.e. LS-Dyna ALE, LS-Dyna ICFD, ANSYS CFX, and Star-CCM+/ABAQUS) participated in this study. Wet drop test data on flat-stiffened aluminum plates of light-ship-like bottom structures available in the open literature was utilized for validation of the FSI modeling. A summary of the experimental conditions including the geometry model and material properties, was distributed to the participants prior to their simulations. A parametric study on flat-stiffened steel plates having actual scantlings used in marine installations was performed to investigate the effect of impact velocity and plate rigidity on slamming response. The FE simulation results for the total vertical forces acting on the stiffened plates and their structural responses to those forces, as obtained from the participants, were analyzed and compared. The reliable and accurate predictions of slamming loads using the aforementioned commercial FSI software packages were evaluated. Additionally, equivalent static slamming pressures resulting in the same permanent deflections, as observed from the FSI simulations, were reported and compared with analytical models proposed by the Classification Standards DNV and existing experimental data for calculation of the slamming pressure. The study results showed that the equivalent load model depends on the water impact velocity and plate rigidity; that is, the equivalent static pressure coefficient decreases with an increase in impact velocity, and increases when impacting structures become stiffer.     

Three-dimensional equivalent static analysis for design of submerged floating tunnel

Stress evaluation of a submerged floating tunnel (SFT) is an issue important for determining the section dimensions required to resist environmental loads. However, the complex interaction between an SFT and surrounding fluid has confined most research on SFTs to longitudinal global time-history analyses based on Morison's equation [1]. Even though these analyses give sufficient information in the longitudinal direction, too little information about the circumferential direction compels an SFT section to be designed conservatively. This means that SFT design requires additional information on the structural behavior of the tunnel in the circumferential direction for efficient design. Accordingly, a supplementary approach by which to obtain structural responses in the circumferential direction is introduced in this paper. Upon consideration of the static responses equivalent to the dynamic behavior, three-dimensional (3-D) finite-element analyses of an SFT were performed by application of static loads corresponding to dynamic loads equivalent to those of wave, current and earthquake. The validation of each equivalent static load was supported by the results from comparison of the tension forces in mooring lines obtained using OrcaFlex [2] and ABAQUS [3]. These were used mainly for longitudinal dynamic analysis and 3-D stress evaluation, respectively, of an SFT. Based on the stresses obtained in the longitudinal and circumferential directions, the selection of suitable section dimensions for an SFT is considered.     

新建铁路隧道下穿既有铁路施工引起的地表沉降控制标准研究

新建铁路隧道下穿既有铁路施工时引起地表沉降,这时对既有铁路运营安全的影响主要受控于轨道的前后高低差.采用ANSYS二维有限元方法,对新建铁路隧道下穿既有铁路工程建立数学模型,模拟计算不同最大等效应力、地质条件、隧道埋深、隧道结构形式等96种工况下的地表沉降量.并利用Peck公式回归分析得到96种工况下的沉降槽宽度系数.对模拟结果和回归结果进行数据分析,推导出沉降槽宽度系数与隧道埋深的关系式,以及地表最大沉降最与地层弹性模量、最大等效应力、隧道埋深的关系式.在此基础上,根据地表沉降曲线的正态分布规律、沉降槽宽度系数的数学意义和轨道的前后高低差管理值,推导得到新建铁路隧道下穿各等级既有铁路时的地表沉降控制标准.     

基于补偿反馈线性化的悬浮控制器设计

电磁型磁浮列车的悬浮系统为典型的非线性系统,经常受到外界扰动影响而失去稳定。针对悬浮系统的这种特点,设计一种干扰补偿的非线性悬浮控制器:在合理假设的基础上,建立EMS型磁浮列车悬浮系统的非线性数学模型;通过反馈线性化将该非线性模型精确线性化,得到等价的线性模型。然后,设计将反馈线性化补偿与扩张状态观测器相结合的悬浮控制器,利用外部扰动观测值对悬浮系统进行补偿。这一设计可大幅度提高悬浮系统的抗干扰能力。仿真实验结果表明,该控制器的控制性能明显优于基于反馈线性化方法设计的控制器,对干扰具有更强的鲁棒性。     

基于联合粒子滤波的系统误差修正方法

在非线性滤波系统中,线性化误差和系统误差是影响滤波精度的两个主要因素.提出联合粒子滤波方法,在减少线性化误差的同时,能够实时估计系统误差的大小并自适应地消除其影响.说话人跟踪仿真实验结果验证了此方法的有效性.     

机车控制系统数学模型的研究

分析了电传动内燃机车控制系统结构及电机转速的变化，电机磁路的饱和，电枢反应对模型参数的影响；建立了内燃机车控制系统的数学模型结构，并通过实验数据获得模型参数，解决了系统线性化问题。     

等效间隙元在钢拱架施工中的应用

根据剩余荷载增量的迭代演算法求解受正弦荷载作用的有间隙连接杆件,并用温度力等效间隙对比计算,二者结果一致,再根据桑坝大桥拱架模型,用两种方法对比计算,二者结果也一致,证明了用温度力等效计算间隙元的正确性和实用性。