城市轨道交通综合枢纽 信息化设计思路剖析

通过对深圳北站交通枢纽建设项目的案例分 析,结合信息化集成系统的特点,对城市轨道交通综合 枢纽信息化设计的思路进行剖析。提出按照城市轨道 交通综合枢纽总体功能规划、综合枢纽运营管理模式 研究、信息化系统功能设计、信息化系统接口设计的系 统构建思路,并采用层次分析法与德尔菲法构建信息 化系统的评价体系,为其他城市进行交通综合枢纽信 息化系统设计提供参考。     

共轨喷油器高速电磁阀的开发

分析了国内外共轨系统高速电磁阀的开发现状,确立了开发目标,从电磁材料和线圈结构等方面对共轨喷油器上高速电磁阀进行了分析和设计,通过优化试验确定了线圈参数,并给出了测试结果。     

高压共轨电喷柴油机调速控制策略研究

以高压共轨电喷柴油机为研究对象,对其调速控制策略进行了研究。建立了电喷柴油机的控制模型,并对PID控制和自适应控制进行了仿真比较。结果表明自适应控制具有明显的优势,更适合于高压共轨电喷柴油机速度控制。     

高压共轨式电控柴油机动态仿真研究

建立了一个准稳态的发动机非线性模型,该模型主要用于研究高压共轨式电控柴油机的动态特性以及各种控制参数对发动机性能的影响。以车用YC6112ZLQ柴油机为仿真对象,在MATLAB/SIMULINK环境下完成模型的建立并进行了动态过程的实时仿真,给出了典型稳态及动态过程的仿真结果。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

第三轨供电系统中受流器与第三轨的接触压力及其对受流性能的影响分析

介绍了第三轨受流器的结构原理。分析比较了弹簧式和气压式受流器与第三轨接触压力调节方式的特点。基于电接触基本理论详细的阐述了受流滑板与第三轨接触区的导电机理。接触区域的导电电路由无数微小的电阻及电容并联而成,接触压力通过影响微小电阻、电容的数量比例,进而影响接触面上的导电能力和磨损性能。标称静态接触压力的设计值接近或等于"法向压应力临界值"时,导电能力和磨损特性取得均衡。     

地铁道岔尖轨线型复核及矫正

地铁道岔尖轨是道岔实现转换功能的主要部件之一，尖轨线型不良不仅使列车产生晃动，也会影响与基本轨的正常靠贴和自由状态平面位置。尖轨与基本轨靠贴时存在离缝、卡阻和尖轨原始位置不准，会使尖轨失去稳定刚度和增大道岔锁闭“框动”、转换动力以及出现转换反弹现象，继而恶化通号转辙设备的工况，影响道岔的正常使用。由此，轨道专业人士应高度重视尖轨的线型控制。在实践的基础上，认真分析尖轨从生产制造、运输、存放、上道使用过程中线型发生不良变化的成因，提出相应对策措施；并介绍尖轨线型的检测复核和矫正手段。其中，首次倡导“一弦矢距法”检测复核整根尖轨线型的现状，特别针对曲线型尖轨，通过建立数学模型计算得到“一弦”条件下尖轨各检测点理论矢距值，为尖轨上道前进行预矫正提供了依据，这对地铁停运后的有限时间天窗内圆满完成尖轨更换作业意义重大。     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

The potential mitigation of CO2 emissions via modal substitution of high-speed rail for short-haul air travel from a life cycle perspective – An Australian case study

The objective of this study is to provide a strategic evaluation of the mitigation of CO₂ emissions via modal substitution of high-speed rail for short-haul air travel on the Sydney–Melbourne, Australia city-pair from a life cycle perspective. It has been demonstrated that when considering CO₂ emissions from vehicle operations, the modal shift from air to high-speed rail on this city-pair has the potential to provide a means of CO₂ mitigation. However, uncertainty exists with regard to the level of mitigation potential when considering the whole-of-life performance of the systems. Given the significant difference in the infrastructure requirements between the air mode and the high-speed rail mode, this study quantifies the life cycle CO₂ load attributable to each system and examines the effect on CO₂ mitigation potential. The study concluded that while the inclusion of the linehaul infrastructure did increase the CO₂ load associated with high-speed rail mode, it did not equate to or exceed the CO₂ load per trip as experienced by the air mode. The avoided annual life cycle CO₂ emission in the target year 2056 was 0.37 Mt representing an 18% reduction when compared to the air mode only on the city pair. In fact, the scenario comparison indicated that the substitution of high-speed rail for short-haul air travel on the city pair resulted in CO₂ emissions avoidance throughout the longitudinal period.     

软弱富水地层浅埋暗挖隧道地表沉降和支护结构受力的模型试验

以莞惠城际轨道交通工程项目GZH-5标段中DK32+300~DK32+927.303段为背景,通过2组模型试验,其中一组无超前注浆,另一组进行超前注浆,研究软弱富水地层浅埋暗挖隧道地表沉降和支护结构受力规律及超前注浆对其受力变形造成的影响,最后,针对软弱富水地层浅埋暗挖隧道施工,提出几点隧道工程设计和施工的相关建议。