便携式水下机器人设计

出于对近海海洋探索的目的,本文应用了上次研究[1]的水下ROV空间姿态控制系统设计了一种便携式水下机器人。该水下机器人系统硬件部分主要由电源模块、无刷电调、遥控部分以及姿态传感器模块组成,软件控制以及相关数据处理由一块ARM-M3内核的处理器完成,编译软件使用Kile。水下机器人结构采用3D打印机制作,材料选用PLA。遥控通讯采用CAN总线协议。水下机器人经过实际调试可以达到相关技术要求,下潜深度100 M,能实现简单的水下作业要求。     

采用谐波比值法的路基碾压实时检测技术研究

在依靠理论研究的基础上利用压实度和振动频率间的正比关系,对压实度进行实时连续检测。结合高速公路建设中现场试验抽取的两种砂砾土压实度与加速度谐波比之间的关系表达式;通过回归探索发现了压实度谐波比的有效值等式和土体粒料组成的联系。探索结论可以直接使用到各等级公路路基基床压实检测工序中去,并且能够使压实检测工作提高效率,减少工序间隔时间,而且有助于在过程中进行压实度质量控制,在公路施工建设领域有着重要的意义。     

长输油气管道金属损失漏磁内检测技术研究

以管道漏磁内检测器为载体,通过对管体进行在线的漏磁内检测,可以达到量化管道缺陷、避免事故发生的目的。文中介绍了管道金属损失漏磁内检测技术,分析了油气管道漏磁内检测技术原理及漏磁内检测系统组成,利用有限元分析方法研究了管道缺陷尺寸对于漏磁场信号的影响,验证了管道漏磁内检测技术的可靠性。     

轨道交通车站节能检测判定坐标系研究与应用

从轨道交通车站项目设计、技术要求、检测参数、检测方法及结果判定的角度,文章阐述了轨道交通车站系统节能检测的主要内容和检测方法。为了快速方便地判定检测结果,提出了检测结果坐标系的二维可视化评判方法,并给出了合格判定的点集数学表达式。以某车站系统节能性能检测项目为案例,运用检测结果判定坐标系法对主要参数包括室内温度、风系统总风量与风口风量、水系统水流量、平均照度与照明功率密度等进行了检测结果分析,实现了节能检测结果的快速和二维可视化判定。     

某型号制导电子箱的检测系统设计*

为解决现有导弹检测设备存在的缺陷,设计了一种模块化、通用化、智能化和标准化的综合检测修理平台。论文介绍了系统的硬件组成以及基于Labwindows／CVI的软件开发。通过部队实践证明,该系统具有重大军事效益和经济效益和广泛的运用前景。     

Fuzzy-logic-based incident detection for signalized diamond interchanges

This paper documents a fuzzy-logic-based incident detection algorithm for signalized urban diamond interchanges. The model is capable of detecting lane-blocking incidents whose effects are manifested by patterns of deterioration in traffic conditions that require adjustments in signal control strategies. As a component of a real-time traffic adaptive control system for signalized diamond interchanges, the algorithm feeds an incident report (i.e., the time, location, and severity of the incident) to the system's optimization manager, which uses that information to determine the appropriate signal control strategy.The performance of the model was studied using a simulation of an actual diamond interchange. The simulation study evaluated the model's performance in terms of detection rate, false alarm rate, and mean time to detect. The model's performance was encouraging, and the fuzzy-logic-based approach is considered promising.     

超声相控阵缺陷检测技术研究

为了将相控阵超声检测技术进一步推广应用,对带有人工缺陷的试件分别采用CR、超声相控阵检测技术进行检测,将检测结果进行比对,试验结果表明CR检测技术与相控阵检测技术在体积型缺陷与面积型缺陷检出率方面各具优势,应结合实际工件使用工况,确定可能出现的缺陷类型,采用合适的检测方法与检测工艺,最大限度地提高缺陷检出率.     

TEM技术在大牛地气田管道腐蚀评价中的应用

文中结合大牛地气田埋地管道腐蚀直接评价（ECDA,ICDA）实践,应用管道壁厚瞬变电磁（TEM）检测技术,通过在沿管道按一定间距布置测点进行基础检测,对所发现的管壁厚度异常点处再加密检测,从而确定腐蚀严重部位,较快地掌握气田整体管道质量情况,达到不需开挖、不破坏管道的良好检测效果。     

Integrated solution for anomalous driving detection based on BeiDou/GPS/IMU measurements

There has been an increasing role played by Global Navigation Satellite Systems (GNSS) in Intelligent Transportation System (ITS) applications in recent decades. In particular, centimeter/decimetre positioning accuracy is required for some safety related applications, such as lane control, collision avoidance, and intelligent speed assistance. Lane-level Anomalous driving detection underpins these safety-related ITS applications. The two major issues associated with such detection are (1) accessing high accuracy vehicle positioning and dynamic parameters; and (2) extraction of irregular driving patterns from such information. This paper introduces a new integrated framework for detecting lane-level anomalous driving, by combining Global Positioning Systems (GPS), BeiDou, and Inertial Measurement Unit (IMU) with advanced algorithms. Specifically, we use Unscented Particle Filter (UPF) to perform data fusion with different positioning sources. The detection of different types of Anomalous driving is achieved based on the application of a Fuzzy Inference System (FIS) with a newly introduced velocity-based indicator. The framework proposed in this paper yield significantly improved accuracy in terms of positioning and Anomalous driving detection compared to state-of-the-art, while offering an economically viable solution for performing these tasks.     

Railway wheel-flat detection and measurement by ultrasound

This work presents an innovative ultrasound technique designed to detect and quantify flats formed in the rolling surface of railway wheels. Differently from other approaches, ultrasonic pulses (Rayleigh waves) are sent over a measuring rail. The variations in the round-trip time of flight (RTOF) of the ultrasound pulse to the rail-wheel contact point allow detecting and quantifying the wheel-flats. In spite of the wear state of the irregularity, the method provides the loss of material and the length of the flat originally formed by abrasion. A theoretical background supports the technique which offers many advantages for railway maintenance. Simulations and experimental results match the expected ones.