Vehicle mass as a determinant of fuel consumption and secondary safety performance

One interaction between environmental and safety goals in transport is found within the vehicle fleet where fuel economy and secondary safety performance of individual vehicles impose conflicting requirements on vehicle mass from an individual’s perspective. Fleet characteristics influence the relationship between the environmental and safety outcomes of the fleet; the topic of this paper. Cross-sectional analysis of mass within the British fleet is used to estimate the partial effects of mass on the fuel consumption and secondary safety performance of vehicles. The results confirmed that fuel consumption increases as mass increases and is different for different combinations of fuel and transmission types. Additionally, increasing vehicle mass generally decreases the risk of injury to the driver of a given vehicle in the event of a crash. However, this relationship depends on the characteristics of the vehicle fleet, and in particular, is affected by changes in mass distribution within the fleet. We confirm that there is generally a trade-off in vehicle design between fuel economy and secondary safety performance imposed by mass. Cross-comparison of makes and models by model-specific effects reveal cases where this trade-off exists in other aspects of design. Although it is shown that mass imposes a trade-off in vehicle design between safety and fuel use, this does not necessarily mean that it imposes a trade-off between safety and environmental goals in the vehicle fleet as a whole because the secondary safety performance of a vehicle depends on both its own mass and the mass of the other vehicles with which it collides.     

输气管道置换优化研究

置换是输气管道投产试运过程中的重要工艺环节,是复杂的扩散、对流过程。文中介绍了输气管道投产前用氮气置换空气的几种方法,阐述了它们的工作原理与实施步骤,对比分析了它们的优缺点,优选了置换方式,并采用Fluent流体模拟软件建立了输气管道氮气置换数学模型,进行了三维稳态和非稳态数值计算,研究了置换过程中混气段长度随管径、管长、流速变化规律,将理论推导、数值计算和现场数据进行了对比,验证了理论结果的正确性,为现场施工提供了科学依据。     

管道内防腐层补口技术研究进展

管道内衬或内防腐涂层现场施焊时,焊缝两侧的防腐层会由于高温作用而破坏,使环焊缝处不能得到有效的保护,内补口技术也成为影响管道质量的主要瓶颈。文中介绍了国内外主要的内补口技术,如内补口机法、内衬保护套（管）焊接法、不锈钢接头法、机械连接法等,并指出各方法的特点。文中还就内补口技术的质量控制和研究方向等提出了建议。     

Airline energy efficiency measures using the Virtual Frontier Network RAM with weak disposability

In this paper, airline energy efficiency is divided into three stages: the operations stage, the services stage and the sales stage. Greenhouse gas emissions are treated as an undesirable output of the services stage. This new three-stage strategic operating framework is a modification of existing models. A new model, Virtual Frontier Network Range Adjusted Measure with weak disposability, is proposed to evaluate the efficiencies of 22 international airlines, from 2008 to 2012. The results show that the new model can establish more reasonable rankings and confirm new benchmarking airlines and that inclusion in the European Union’s Emissions Trading Scheme has had little influence on the improvement of airline energy efficiency.     

利用SPS模拟川气东送管道压气站失效问题

为研究压气站失效与单台机组失效对输气管道的影响程度,采用SPS软件对压气站失效和单台机组失效进行了详细模拟。模拟结果显示:压气站失效与单台机组失效相比对管输系统影响较大;对于压气站失效,越靠近末站的压气站失效对管输系统影响越大;对于单台机组失效,越靠近首站的压缩机失效对管输系统影响越大。分析结果可为事故状态下的供气和抢修提供参考。     

封堵三通卡球原因分析及封堵设备改进设计

文中简述了某天然气管道A站-B站段内检测通球过程中封堵三通处出现的卡堵问题,结合通球、封堵等工程实践,对卡球原因进行了分析,发现了塞堵的设计缺陷,通过理论计算提出了塞堵的优化设计,解决了塞堵无旋转限位的问题,并对优化设计后期实践应用可能存在的问题提出了解决办法,对天然气管道带压封堵、通球,提高输气效率等具有参考意义。     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

燃机动力学建模中复杂结构处理方法研究

提出了三种以动力学相似为基础的转子动力学建模关键技术,并以某型燃气轮机建模为例,对该关键技术进行了验证。利用三种方法,对该燃气轮机的动力学特性进行研究,并与整机试验结果进行了对比。结果表明,动力学分析的准确程度主要由模型决定,本文所提出的三种建模关键技术能够反映结构的真实特性,可用于具有类似结构的双转子系统。     

PCTC船货舱通风系统设计

PCTC船货舱通风系统的设计是整个PCTC船设计的一个重要组成部分,关系到总体、结构、舾装、轮机和电气等多个专业的设计。近几年来,PCTC船的货舱通风系统的设计也在不断的变化、改进和优化中,本人基于本所目前设计开发的6600UNITS PCTC船型,对这些年来PCTC船货舱通风系统的设计做了一个总结和分析,供相关设计人员参考。     

燃气轮机的大型集装箱船LNG燃料舱布置

为了满足环保新法规要求,很多船东首选LNG作为船用燃料。本文基于燃气轮机推进的大型集装箱船的布置特点及IGF规则的要求,对LNG燃料舱布置的位置和LNG燃料舱适用的形式进行了论证,获得了满足大型集装箱船性能需求和IGF规则要求的LNG燃料舱设计方案。