船舶电缆自动化敷设系统设计与实现

在船舶电缆敷设过程中,很难借助有效的工装提高劳动效率,低空间的高强度作业存在严重的安全风险。以船舶电缆自动化敷设系统为分析对象,介绍系统组成和系统接口,采用比例积分微分(Proportion Integration Differentiation,PID)算法计算系统行程,通过PROFINET总线完成数据传输,以人机界面(Human Machine Interface,HMI)实现系统性能要求。在风电安装平台上的实际运用表明,该系统可解决造船行业劳动力成本高和安全风险大的问题。     

Socially optimal electric driving range of plug-in hybrid electric vehicles

This study determines the optimal electric driving range of plug-in hybrid electric vehicles (PHEVs) that minimizes the daily cost borne by the society when using this technology. An optimization framework is developed and applied to datasets representing the US market. Results indicate that the optimal range is 16 miles with an average social cost of $3.19 per day when exclusively charging at home, compared to $3.27 per day of driving a conventional vehicle. The optimal range is found to be sensitive to the cost of battery packs and the price of gasoline. When workplace charging is available, the optimal electric driving range surprisingly increases from 16 to 22 miles, as larger batteries would allow drivers to better take advantage of the charging opportunities to achieve longer electrified travel distances, yielding social cost savings. If workplace charging is available, the optimal density is to deploy a workplace charger for every 3.66 vehicles. Moreover, the diversification of the battery size, i.e., introducing a pair and triple of electric driving ranges to the market, could further decrease the average societal cost per PHEV by 7.45% and 11.5% respectively.     

面向智能车辆的现役道路设施行驶适应性研究综述

为了总结面向智能车辆的现役道路设施行驶适应性，即现役道路基础设施承载智能车辆行驶的适宜程度，阐述自主智能驾驶定义与驾驶自动化等级分类，在此基础上剖析不同等级间的人机功能差异，并分别从感知层、感知-决策层、决策-控制层探讨与道路设计要素相关联的人机功能差异，通过归纳总结智能车辆与道路几何要素、路面性能及其他道路要素(如道路标线)的相互作用机制研究，从道路工程角度及其他道路要素方面回顾该领域的研究现状，指出存在的问题和未来发展方向。研究结果表明：相比传统车辆，配置高等级自动驾驶系统的智能车辆对现役道路设施行驶适应性最高，主动安全系统次之，而驾驶辅助及有条件自动驾驶系统适应性不足。而目前研究主要问题包括：难以归纳、标定不同驾驶自动化等级间的人机功能差异及其对于道路设计参数的需求设计值；测试道路场景条件过于理想，考虑的驾驶自动化等级单一，试验规模和样本有限；道路几何、路面性能以及道路标志、标线等道路要素与智能车辆间的相互作用机制研究不足，缺乏与不同道路场景相匹配的智能车辆驾驶特征数据的获取手段。因此建议：重视并推动与道路设计要素相关联的关键人机功能差异指标信息共享；联合高保真且可交互的道路场景、高精度感知传感器物理模型、车辆动力学模型及微观交通流模型，利用测试场景自动化生成、极限工况场景搜寻与泛化等技术开展智能驾驶虚拟测试，突破现有研究的深度和广度；探索反映不同等级智能车辆的道路行驶适应性特征指标与评价标准，精准、有效地评估预测复杂道路场景及不利道路条件下的行驶适应性。     

HXD1型机车自动驾驶系统设计与应用

主要介绍HXD1型交流传动电力机车的自动驾驶系统方案设计与应用情况,以机车改动最小、成本最低为原则,通过加装自动驾驶系统设备、通信及供电线缆实现自动驾驶功能。通过机车自动系统的成功运用,降低了人工劳动强度,杜绝了人为失误因素,提升了机车操纵水平和操纵一致性。     

城市轨道交通全自动运行线路在无人值守模式下的应急处置

基于不同的场景,详细阐述了无人值守模式下全自动运行线路的应急处置方法、区间疏散方式及救援方式。结合专门的自动应急或远程应急功能,使无人值守全自动运行线路应急处置能兼顾运营效率和安全,避免列车迫停区间。建议做好多职能队员的相关培训工作,并合理选择列车自动运行控制系统的应急功能。     

Human-like autonomous car-following model with deep reinforcement learning

This study proposes a framework for human-like autonomous car-following planning based on deep reinforcement learning (deep RL). Historical driving data are fed into a simulation environment where an RL agent learns from trial and error interactions based on a reward function that signals how much the agent deviates from the empirical data. Through these interactions, an optimal policy, or car-following model that maps in a human-like way from speed, relative speed between a lead and following vehicle, and inter-vehicle spacing to acceleration of a following vehicle is finally obtained. The model can be continuously updated when more data are fed in. Two thousand car-following periods extracted from the 2015 Shanghai Naturalistic Driving Study were used to train the model and compare its performance with that of traditional and recent data-driven car-following models. As shown by this study’s results, a deep deterministic policy gradient car-following model that uses disparity between simulated and observed speed as the reward function and considers a reaction delay of 1 s, denoted as DDPGvRT, can reproduce human-like car-following behavior with higher accuracy than traditional and recent data-driven car-following models. Specifically, the DDPGvRT model has a spacing validation error of 18% and speed validation error of 5%, which are less than those of other models, including the intelligent driver model, models based on locally weighted regression, and conventional neural network-based models. Moreover, the DDPGvRT demonstrates good capability of generalization to various driving situations and can adapt to different drivers by continuously learning. This study demonstrates that reinforcement learning methodology can offer insight into driver behavior and can contribute to the development of human-like autonomous driving algorithms and traffic-flow models.     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

磁力摩擦式辅助驱动在TBM连续皮带机中的应用

长大隧道TBM(tunnel boring machine)施工大多采用连续皮带机出渣,当运输距离较大时通常需要在中间增设辅助驱动,以降低胶带最大张力,从而降低胶带强度。为了提高辅助驱动的工程适应性,研发了磁力摩擦式辅助驱动系统,具有驱动力大、无二次转载、胶带无二次冲击损伤、结构简单、故障点少、结构紧凑占用空间小、安装方便和配置灵活等特点。该成果可用于采用钢丝绳芯胶带的TBM连续皮带机、支洞皮带机以及其他需要辅助驱动的胶带输送机,并在山西省中部引黄工程TBM1标段成功应用,具有广阔的推广应用价值。     

高压共轨高速电磁阀自升压双电源驱动方法研究

在对现有高压共轨高速电磁阀驱动电路进行分析的基础上,提出了一种基于电磁阀自身的自升压方式,一方面把高速电磁阀关闭时本身储存的电能回收到储能电容中,另一方面在两缸工作间隙利用电磁阀线圈作为升压电路电感对储能电容进行能量补充,保证储能电容上的电压达到一个稳定状态。电路在保证实现双电压快速驱动的同时,使驱动结束的能量得到有效回收,同时省去外接专用升压电路所需要的电感部件,减小了电源电路的体积和设计成本,并且电控单元印制线路板的电磁兼容性设计易于保证。应用该方法对某高压共轨部件高速电磁阀进行试验,匹配出驱动参数,并进行稳定性试验验证,结果表明该方法能够满足工程应用需求。