基于直接CAA与SEA的汽车风噪预测与控制

本文中对某一SUV风噪的预测与控制进行研究.首先基于风洞测试进行风噪声源特性与传递路径的分析,发现泄漏噪声主要发生在500 Hz以上中高频段,车底风噪主要集中于800 Hz以下中低频段,而在外形噪声中,由车顶和四门传递的风噪的贡献大于翼子板.然后基于气动噪声直接计算法和统计能量分析对外形噪声进行仿真,并结合风洞测试分析...     

基于有限元分析的船用配电板抗冲击设计

本文介绍某船配电板抗冲击设计.通过对现有冲击计算方法的理论分析,选取了一种适合某配电板冲击仿真的计算方法并对配电板研制阶段进行了抗冲击性能分析及优化,减小了系统冲击响应.产品在国家标准要求下进行了冲击试验,实验结果满足工程设计实际需求,为后续同类产品设计及优化提供了理论支撑与设计参考.     

瞬态瑞雷波在地层勘探中的应用

根据瞬态瑞雷波的传播特性和测试原理,使用振动及动态信号采集分析系统采集分析了测试工点的瑞雷波信号,并得到了测试工点的地层分布情况和各层的物理特性.     

Phase change analysis of an underwater glider propelled by the ocean's thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean's thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process,but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees,the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change,and the slope of the temperature time history curve remains the same. However,the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size,boundary conditions,and the power source's cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38mm needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

鹰厦线K290+795～905段滑坡稳定性有限元分析

针对鹰厦线K290 795~905段路堑边坡建立稳定性分析模型,并开展有限元数值计算.通过分析坡体各段的受力情况,得到各个单元的主应力及剪应力大小,并结合极限平衡计算分析了坡体稳定性,论证了降雨作用下容重、内摩擦角变化对坡体稳定性的影响,探讨了设置抗滑桩前后及其在降雨作用下的抗滑工程效果.     

基于数值模拟的钛合金锯齿状切屑研究

切削加工中切屑成形是一种典型的大变形问题,它涉及到材料非线性、几何非线性以及边界非线性等问题。本文利用DEFORM-2D对钛合金(Ti6Al4V)进行了锯齿状切屑形成过程的有限元模拟,分析了切削过程中的应力场、应变场及温度场,探讨了锯齿状切屑的形成机理,获得了切削参数对锯齿状切屑形态的影响规律,为优化切削参数、提高刀具寿命提供了参考。     

山区双车道公路机动车碰撞事故严重度致因比较分析与预测

以云南山区双车道公路1740起碰撞事故数据为基础,将事故数据分为机动车与机动车、机动车与摩托车、机动车与非机动车3种类型,事故严重度划分为仅财产损失、轻伤、重伤或死亡事故3个等级,分别用部分优势比模型和有序Logit模型建立3类机动车碰撞事故严重度分析模型,对比分析不同等级事故的显著影响因素和模型的预测准确率,分析部分...     

ARPA模拟海上交通环境的事故分析系统研究

通过阐述ARPA的功能及在海事调查中的作用,提出用ARPA进行海上交通模拟的方法,并在此基础上设计出一种事故分析系统,从而方便对海上交通事故进行统计分析。     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

The planning and analysis of a new group rapid transit system: the SkyCabs monobeam system in Auckland

This paper examines a case study of the SkyCabs system as a way to alleviate some of the traffic problems of Auckland, New Zealand. SkyCabs is an elevated two-way monobeam carrying light eight-seater cabs on tracks on each side of the beam, available on demand, providing fast, pollution-free, unimpeded travel above the footpath with panoramic views of the city. The aim of this study is to investigate the attractiveness of implementing the SkyCabs system to and from Auckland central business district (CBD) and Auckland international airport by examining four variables: different routes, different number of stops/stations, different passenger demand levels, and different number of cabs in the system. The analysis utilizes geographical information system and simulation tools for the various scenarios considered. The results show that it is possible to assess the cost–benefit of alternative routes in terms of those four variables and rate of return on investment.