A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

细水雾与排烟系统共同作用下地铁车站火灾烟气蔓延规律

为研究岛式地铁车站内列车发生火灾时,站台细水雾与排烟系统对烟气蔓延的控制效果,依托西安地铁4号线岛式地铁车站,采用FDS软件建立1：1的数值仿真模型,选择大涡模拟,研究站内列车火灾规模为5 MW时,站台细水雾与排烟系统共同作用下,火灾烟气蔓延速度、能见度与温度场的分布特征,分析了细水雾与排烟系统对烟气蔓延特性的影响规律;并通过缩尺模型试验,验证了数值模拟方法研究细水雾控制地铁火灾烟气蔓延的可靠性。研究结果表明：车门间隔开启时,烟气先向列车两侧蔓延,150 s时扩散至整个车厢并向站台层蔓延,当开启站台细水雾时,烟气温度明显下降,且随着细水雾粒径的减小与流量的增大,烟层降温效果增强;当水雾粒径为100 μm,流量为8 L·min^-1时,距离站台中线3 m处断面平均温度为36.19℃,较未开启细水雾时温升降幅可达62.91%;同时细水雾使得烟层蔓延速度减小,在开启细水雾系统后200 s内2^#楼梯口平均空气质量流速下降39.72%;当开启排烟系统时,可使列车内温度场纵向分布最大值向火源下游移动,加快站台层及列车内对流换热效率,使细水雾的气相冷却作用得到加强,二者同时作用时降温阻烟效果最佳。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

Field measurements of the evolution of wheel wear and vehicle dynamics for high-speed trains

This investigation demonstrates the wheel wear evolution and related vehicle dynamics of high-speed trains with an operating distance (OD) of around two million kilometres. A long-term experimental test lasting two years was conducted to record the wheel profiles and structural vibrations of various trainsets. The wheel wear, namely the profile shape, worn distribution and wheelset conicity, is investigated for several continuous reprofiling cycles. Typical results are illustrated for the stability analysis, and the ride quality is examined with increasing OD. In addition, the vibration transition characteristics between suspensions are investigated in both the time and frequency domains. The experiments show that the dominant wear concentrates on the nominal rolling radius, and the wear rate increases with OD because of the surface softening resulting from the loss of wheel material. The vibration of structural components is aggravated by the increase of the equivalent conicity of the wheelset, which rises approximately linearly with the wheel wear and OD. High-frequency vibrations arise in the bogie and car body related to the track arrangement and wheel out-of-roundness, causing the ride comfort to worsen significantly. Additionally, the system vibration characteristics are strongly dependent on the atmospheric temperature. Summaries and conclusions are obtained regarding the wheel wear and related vehicle dynamics of high-speed trains over long operating times and distances.     

移动式布料皮带机在双护盾TBM出碴中的应用

隧道TBM施工采用有轨运输方式出碴时,掘进过程中矿车卸碴布料涉及工序较多,且牵引列车编组的内燃机车持续运行会增加尾气排放,造成隧道内空气污染。应用于青岛地铁隧道施工的双护盾TBM的后配套配置了移动式布料皮带机,该皮带机可实现往复移动和正反向运行为矿车卸碴布料。对该移动式布料皮带机的工作原理、结构组成、移动方式、张紧方式和驱动方式等进行研究,并分析其应用效果。实践证明,该技术应用于TBM后配套出碴可行、实用,简化了施工工序并提高了工作效率。     

列车运行视景仿真中雨雪的模拟

在建立降雨、降雪过程数学模型的基础上,设计了实时雨雪粒子系统.介绍了该粒子系统的实现方法,包括粒子属性的定义与更新、粒子生命周期控制等.在该系统中,通过控制粒子的可视区域,模拟隧道或车站对雨雪遮挡效果.用简化的物理模型实时计算粒子的空间位置,用公告牌技术绘制粒子.实际应用结果表明,该粒子系统能够在复杂的列车运行场景中实时地模拟雨雪现象.     

城际铁路列车开行方案优化分析

列车开行方案对城际铁路的运营组织至关重要,并直接影响着城际铁路运营效益。文中从旅客平均候车时间出发,提出城际旅客出行方便值的概念,基于城际铁路旅客出行方便值最大和运营组织效益最优,建立城际铁路客车开行方案优化模型,并设计该模型相应的算法。对城际铁路的运营管理决策有很好的借鉴意义。     

ֱ�ﳵ��ȡ�������ģ�ͼ����㷨

直达列车多点装卸取送顺序直接关系到铁路货车运用效率;文章考虑车辆行驶时间及装卸时间的不确定性,假设它们为服从正态分布的随机变量,经过分析,在给定置信水平下,提出了调车机车作业中断时间的计算方法,并结合算法设计建立了极小化调车机车作业中断时间的最佳取送模型;利用遗传算法的原理及方法对取送顺序方案进行了研究,构造了解决该问题的单亲遗传算法;通过从遗传算法对算例的计算过程和结果可见,该算法求解直达列车多点装卸取送问题取得了较好的效果。     

Modeling Feedback Scheme of Empty Cars in Unloading End of Heavy Haul Railway

The transportation organization of heavy haul railway is complex in China, especially, the feedback of empty cars. On the basis of reference to the existing research results, and deep analysis of the characteristics of empty cars distribution of heavy haul railway, the authors construct the feedback schematic model of empty cars in unloading end of heavy haul railway. The minimum quantity of the combined trains and the time for combination is taken as the model goal and solution algorithm on the basis of minimum cost and maximum flow is formulated. Daqin railway is taken as an example and relevant conclusions of feedback scheme of empty cars of heavy haul railway, through an analysis of calculation results, are drawn.     

分局调度系统列车确报子系统的设计与实现

根据TMIS分局调度系统的要求，在对用户进行调查的基础上，用Java开发了列车确报收发子系统，该系统具有查询、显示、排序、修改、转发和下发及打印等基本功能，系统数据库用Oracle开发，并给出了系统实现的关键类与方法(主程序、数据库连接、表模式)，该系统已在石家庄铁路分局调度系统中应用。