型腔结构对尾轴承力学性能影响的有限元分析

型腔尺寸的大小和腔数对水润滑橡胶尾轴承的力学性能有重要影响，并且直接影响轴承的承载能力和运转精度。本文基于有限元法，研究了不同型腔数目、型腔全角和型腔长度对尾轴承的力学性能影响。结果表明：在5种不同腔数尾轴承的研究对比中发现，4腔尾轴承的力学性能最优。研究型腔全角和长度因素影响时，发现全角55°长度500 mm的型腔结构性能更好。     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

基于SHEL和三角模糊数理论的地铁钻爆法施工安全评价方法研究

为合理应用决策数据中不同专家的背景知识,找出地铁施工过程中安全测评体系的关注重点,根据地铁施工的特点和SHEL安全模型理论,建立以人-软件(L-S)、人-硬件(L-H)、人-环境(L-E)和人-人(L-L)4个环节为基础的钻爆法地铁施工安全指标体系。请专家给出指标语义评价等级和指标权重语义评价等级,并根据其与三角模糊数的对应关系分别得出三角模糊数评价值。针对不同专家的重要性程度差异,提出基于三角模糊数的群一致性评价方法,得出专家综合权重,集结评价数据,最终得到安全评价结果。最后,对青岛地铁1号线过海段进行实例分析。结果表明,该方法可以解决群评价过程中专家个体权威与群体共识难以兼顾的问题,能够充分利用群决策中的原始评价信息,提高地铁施工安全水平评价的准确性。     

大城市中心区实施拥堵收费的影响评价研究

文章在分析大城市中心区拥堵收费实施条件与方式的基础上,定性分析实施拥堵收费对居民出行行为以及中心区动静态交通的影响,最后提出基于模糊评价理论的中心区拥堵收费影响评价模型.     

�����ν���Э���ĵ�������վ�򳵿����Ż�

研究了高峰时段列车运行的衔接协调对换乘站候车客流量的优化问题。首先分析了换乘站各站台候车客流的组成因素,确定出各运行方向的换乘站台内客流量随时间变化的规律。然后,以时段内换乘站候车客流量的最大值最小为目标,建立优化模型。模型以站台最大可容纳候车人数为约束条件,以各方向列车在换乘站的到达时刻为调整对象,实现了高峰时段换乘站内聚集客流的优化。最后,针对验证案例,设计了遗传算法进行求解,得出了协调较优解,并给出与较劣解的对比分析。结果表明,该优化方法能够有效降低换乘站内的候车客流人数,可为网络化的优化协调工作提供参考。     

三轴船舶电动摇摆模拟试验台研究

针对船舶摇摆模拟试验台系统在科学研究和船载仪器可靠性试验中的应用,设计了一种多功能三轴船舶电动摇摆试验台随动控制系统。首先对摇摆试验台进行控制建模,确定电流、速度、位置三闭环控制方案,然后采用常规PID算法设计三环控制器参数,对位置环用模糊自适应PID控制器进行优化设计。提出以变周期、变幅度和组合曲线给定的摇摆方法模拟风、浪、流干扰,对系统进行仿真研究。仿真试验结果表明,设计的系统具有响应迅速、模拟准确、可靠等特点,能够较好的模拟实际海况中船舶摇摆运动,为搭建实际试验平台奠定了基础。     

叶片数对喷水推进低比转速轴流泵叶轮水动力性能的影响

喷水推进低比转速轴流泵是随着喷水推进技术的发展而产生的一种新泵型。针对一型低比转速轴流泵叶轮叶片数分别选取为5、6、7建立三组叶轮模型,选择RNG k-ε两方程涡粘模型进行叶轮内流场与功率、总压扬程、效率的数值模拟计算,得到三组叶轮的相关水动力曲线。在此基础上分析叶片数对低比转速轴流泵叶轮水动力性能的影响,得到叶片数对功率、总压扬程与工况点影响较大,而基本不影响最高效率的结论,为我国该类泵型的深入研究提供参考。     

Experimental Investigation of the Effect of Bow Profiles on Resistance of an Underwater Vehicle in Free Surface Motion

In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion ...