共享停车泊位数量可变下交通流逐日演化规律

为了揭示在共享停车泊位数量可变条件下的网络交通流逐日演化规律,首先构建了共享泊位交易系统,并考虑了交易市场中的共享泊位提供者可以选择2种异质性的价格预期方式,即理性预期方式和幼稚预期方式;而后对共享泊位的均衡价格、2种提供者的占比差、高峰时段公交和小汽车需求的演化规律进行了分析;其次,以2条平行路径的路网为例,对网络交通流量分配的最终演化结果进行了分析;最后,在对上述2个系统的最终演化状态给出定量判据后,以北京市实际路网为例进行了数值试验。理论分析和数值试验结果表明:①对于共享泊位交易系统,若供给曲线斜率小于需求曲线斜率,则共享泊位交易系统的唯一均衡解可实现无条件渐进稳定;否则若理性提供者的交易与预测成本之和大于幼稚提供者,则存在临界提供者选择强度,使得共享泊位交易系统在大于此临界值条件下出现分岔或混沌现象;②对于网络交通流系统,若出行成本对路径流量敏感度小,路径选择概率对出行成本敏感度小,小汽车需求量不大,则系统唯一的均衡解可能是渐进稳定的,否则系统会出现分岔或混沌状态;③当共享泊位交易系统处于渐进稳定状态时,若提供者对共享泊位的价格变动不敏感,用户对其价格变动敏感,潜在共享泊位需求量不大,理性提供者的交易与预测成本之和并非远大于幼稚提供者,提供者选择强度不大,则由于受到共享泊位交易总量的限制,高峰时段的均衡小汽车需求不大,导致网络交通流系统的最终演化状态容易趋向于渐进稳定;④当共享泊位交易系统处于混沌状态时,网络交通流系统会产生更加严重的分岔与混沌现象。     

新建本科院校市场营销专业模块化教学改革——基于岗位和能力导向的应用技术人才培养

通过行业论证和企业调查,明确市场营销职业岗位类别设置及特征,掌握这些职业岗位对应用技术性本科学生知识、能力和素质等方面的现实需求,通过问卷调查本校市场营销专业学生对专业教学的现状及建议,参考广东部分新建本科院校的做法,建立市场营销专业的岗位需求、工作内容、职业能力、模块教学和任务学习为一体的教学模式。     

基于剩余充电电量的锂离子电池组容量快速估计方法

针对传统锂离子电池组容量确定方法存在的效率低、能耗高且只能离线应用等问题,提出一种基于电池剩余充电电量的锂离子电池组容量快速估计方法。首先,基于充电电压曲线一致性原理,以电池组内率先充电至充电截止电压的电池单体电压曲线为基准,通过电压曲线的平移缩放与线性插值计算出各单体电池的剩余充电电量与剩余充电时间,从而实现各单体电池的荷电状态(State of Charge, SOC)在线估计,在此基础上实现电池组容量的快速估计。其次,在电池单体模型的基础上建立电池组的仿真模型,并在全SOC区域上对模型参数进行分段辨识。通过所建立的仿真模型得到电池组的充放电曲线,并对电池组容量进行估计。最后,对4个单体串联而成的电池组进行充电试验。研究结果表明:仿真容量与估计容量误差为1.2%以内,验证了所提出的容量快速估计算法的有效性;利用所提方法估计出电池组容量与试验得到的电池组容量的误差为2.61%;该方法根据电池充电曲线的平移与缩放即可在线估计出电池组容量,可应用于新电池组容量的在线快速估计,能在保证3%估计误差的基础上将检测效率提高到传统方法的2倍以上。     

Evaluating determinants of attractiveness and their cause-effect relationships for container ports in Taiwan: users’ perspectives

The attractiveness of ports is usually a pre-requisite and necessary condition for ports to achieve competitiveness, as well as the springboard to explore the competitive advantages of ports. To determine whether a port is competitive, it is necessary to explore whether it boasts certain factors that make the port attractive to users. The main purpose of this article is to apply the Analytic Hierarchy Process (AHP) method and the Decision Making Trial and Evaluation Laboratory (DEMATEL) technique to evaluate key determinants of attractiveness and their cause/effect relationships for container ports in Taiwan. The empirical results showed that: (1) Top six determinates of attractiveness for container ports are ‘ample cargo sources,’ ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ ‘efficient wharf operations,’ and ‘adequate wharfs and back-line land,’ respectively. (2) Among the above six determinants of attractiveness, ‘ample cargo sources’ is the cause determinant. Three determinants of port attractiveness, ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ which are the effect determinants. They are affected by the determinants of attractiveness of ‘ample cargo sources’. In addition, this study discusses the above findings and expects to provide the study results to Taiwan’s port authorities for reference.     

信号交叉口行人二次过街下右转车通行能力与延误估计模型

在充分分析典型四相位交叉口行人二次过街设置前、后的行人流与右转车流冲突的前提下，以行人过街时间占有率和行人群到达分布作为分析指标，利用可插车间隙理论得出行人单向通行和双向通行条件下的右转车通行能力计算公式；根据行人流随机消散和集中消散的不同特征，应用随机分布理论推导出右转车穿越行人流的延误模型；并通过算例对比分析行人二次过街设置前、后右转车通行能力和延误的变化值。结果表明，除了在少数行人流量比较大的情况下， 行人二次过街的设置会小幅度减少右转车的延误；在其他大多数情况下，行人二次过街设置后， 右转车的通行能力将受到限制，延误增大，其中，平均通行能力降低了16.68%，平均延误时间增大 了21%，所以，当右转车交通需求较大时，需同时考虑行人和右转车的交通运行状态，优化设计是否采用行人二次过街，避免右转车超出极限忍耐时间而增大与行人冲突的概率。     

集装箱专用平车加装承载板实现滚装运输技术研究

为弥补应急情况下滚装运输所需平车数量缺口,同时为完善车辆自身应急保障能力,分析集装箱专用平车用于滚装运输需求,针对集装箱专用平车用于滚装运输存在的主要问题,提出在不改变车体结构前提下,通过加装承载板实现滚装运输的解决思路。结合集装箱专用平车结构特点,分析承载板的数量、尺寸、材质,设计承载板由承载面、横支撑架、渡板、斜支腿、受力面、绳拴构成,给出加装改造方法,并通过校核承载能力和研究适运范围,研究加装改造后的集装箱专用平车滚装运输能力,得出改造后的集装箱专用平车可以满足大部分滚装运输货物运输需要。     

移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

面向生产管理信息化的涂装智能设计系统

研究分析涂装设计工艺流程、涂装生产管理流程及涂装机器人工艺参数，整理分析涂装工艺数据、生产管理信息和涂装机器人的工艺特征，对这些数据进行整理归纳，理清他们之间的逻辑关系，形成数据接口，通过数据库系统完成涂装规范化设计和生产管理以及涂装机器人的对接。     

A combined assessment of air and noise pollution on the High Line,New York City

The High Line is an elevated public park in New York City, transformed from an unused freight rail line. Pedestrians walking through Manhattan’s West Side can walk either on the High Line or on a footpath below. Using Manhattan as a laboratory, this paper offers a combined assessment of noise and particulate matter pollution for its pedestrians. Noise and PM_2.5 levels were recorded simultaneously for two cases (i) pedestrians walking on a footpath alongside road traffic and (ii) pedestrians walking on the elevated High Line. Testing took places over three days in autumn 2014. Results were analysed to investigate if pedestrians using the High Line would have a lower pollution exposure to those using the footpath below. Results showed statistically significant differences between the upper and lower levels in exposure to both pollution types. In order to quantify the overall impact, results are expressed through a combined air–noise pollution index. This index indicates that the average reduction in PM_2.5 and noise pollution along the High Line compared to the footpath below is approximately 37%.