不同动力电池新能源货运配送车辆节能减排绩效评价研究

为研究新能源货运车辆装配不同动力电池对节能减排的影响,选取某款新能源货运配送车辆为研究对象,利用GaBi软件建立了3种常用动力电池的整车生命周期评价模型,从原材料获取、生产制造、装配、运行使用、报废回收5个阶段进行节能减排差异分析,并对全球变暖潜值 （Global Warming Potential,GWP） 等环境影响类型进行归一化处理和量化计算处理。结果表明,分别装配3种电池整车的化石能源消耗以煤炭为主、环境排放以CO2为主;纯电动汽车的能源消耗、污染物排放集中在运行使用阶段;综合比较,装配了三元锂电池的整车,其全生命周期节能减排效果最佳,装配了锰酸锂电池的整车则表现最差。加大清洁能源的使用力度、减少用于电力生产的化石能源消耗、提高回收率等措施,可以显著减少污染物排放。     

控制稀燃汽油机NOx吸附-还原催化转化器再生过程的试验研究

针对汽油机稀薄燃烧排放控制的特殊要求,研制了一套适用于稀燃汽油机的电控节气门(ECT)系统.该系统可控制稀燃发动机周期性的短暂工作于浓混合气状态,满足NOx吸附-还原催化转化器的工作要求,降低稀燃发动机的NOx排放.并在混合气浓度改变的同时实现对点火时刻和节气门开度的连动控制,维持发动机输出功率稳定.实验结果表明,稀混合气燃烧配以NOx吸附-还原催化转化器进行排气后处理可使NOx排放最低达50×10-6,最高转化率达91%,该系统是解决稀燃及其排放问题的可行方案.     

动态OD反推理论中的关键问题研究

针对ITS研究中动态OD矩阵难以获得的问题,回顾动态OD反推理论的发展历程,在此基础上明确了该领域研究中的四个关键问题:状态变量的选择、系统方程的确定、OD量与路段流量的关系和OD矩阵动态特性的体现,在对其进行分析的基础上提出每个关键问题的解决方法,为动态OD反推理论的进一步研究垫定基础。     

深圳市“5.24”暴雨洪水灾后的反思

1998年5月24日，深圳市暴雨成灾，经济损失很大。本文总结和分析了暴雨洪水的特性及其成灾的原因，提出防洪减灾的措施和建议。     

柔性桩与土相互作用非线性分析的增量传递矩阵法

对桩侧土采用非线性荷载传递函数,对桩端土采用线性荷载传递函数,同时考虑桩周土所分担的荷载对单桩荷载传递规律的影响,利用增量荷载传递矩阵法及微分方程的近似解法--子域法,推出了刚性承台下柔性桩与地基非线性相互作用的近似解析算式。为了验证该方法的可行性,通过试验将试验结果与有限元结果及该方法所得结果进行了对比,对比表明:该理论解与现场实测值、有限元计算值都非常接近。     

使用乙醇还原剂的NOx-SCR催化剂的性能评价

采用计算机辅助分析的方法设计了乙醇还原剂添加装置，并使用这套装置在发动机台架上进行了稀燃NOx选择催化还原（SCR）催化剂的性能评价试验。试验结果表明，在30000h^-1空速、排温为350～420℃范围的条件下，该催化剂的NOx转化率维持在90％以上，而在低温和高温下的转化率较低；随着乙醇添加量的增加，催化剂NOx转化率提高，但同时会增加THC排放；当空速超过40000h^-1后，催化剂性能有所下降。     

Optimal bus fleet management strategy for emissions reduction

Transportation is a major cause for environmental degradation via exhaust emissions. For many transit-oriented metropolitan areas, bus trips often constitute a sizeable mode share. Managing the bus fleet, in particular updating buses to comply with the newer emissions standards, therefore, can have a substantial impact on transportation-induced air quality. This paper presents the approach of remaining life additional benefit–cost (RLABC) analysis for maximising the total net benefit by either early-retiring or retrofitting the current bus fleet within their lifespans. By referring to the net benefits for different bus types estimated by RLABC analysis, the most beneficial management scheme for the current bus fleet can be identified. Optimal bus fleet management (BFM) models based on the RLABC analysis for the operator and the government are developed. Then a government subsidy plan is produced to achieve win–win solutions, which will offer efficient and flexible management schemes. To illustrate the approach, the largest bus company in Hong Kong, which carries more than 23% of the total trips in Hong Kong, is taken as a case study example. Instead of adopting a fixed retirement plan, such as replacing buses at the age of 17 as is currently practised, the proposed method develops an optimal BFM scheme that progressively phases out buses or retrofits them. This study produces promising results to demonstrate the large benefit of this approach for optimal bus fleet management.     

Subjective-utility travel time budget modeling in the stochastic traffic network assignment

ABSTRACT

In this article, we propose a new model called subjective-utility travel time budget (SU-TTB) model to capture travelers' risk-averse route choices. In the travel time budget (TTB) and mean-excess travel time (METT) model, a predefined confidence level is needed to capture the risk-aversion in route choice. Due to the day-to-day route travel time variations, the exact confidence level is hard to be predicted. With the SU-TTB model, we assume travelers' confidence level belongs to an interval that they may comply with in the route choice. The two main components of SU-TTB are the utility function and the TTB model. We can show that the SU-TTB can be reduced to the TTB and METT model with proper utility function for the confidence levels. We can also prove its equivalence with our recently proposed nonlinear-expectation route travel time (NERTT) model in some cases and give some new interpretation on the NERTT with this equivalence. Finally, we formulate the SU-TTB model as a variational inequality (VI) problem to model the risk-averse user equilibrium (RAUE), termed as generalized RAUE (GRAUE). The GRAUE is solved via a heuristic gradient projection algorithm, and the model and solution algorithm are demonstrated with the Braess's traffic network and the Nguyen and Dupuis's traffic network.     

面向控制的SCR催化转化器温度模型

为了建立面向控制的SCR催化器温度模型,根据能量守恒和质量守恒方程并考虑热平衡中所涉及的换热过程不同,建立了4种SCR催化器温度的数学模型,并利用Matlab/Simulink构建图形化的计算模型。采用柴油机欧洲稳态循环(ESC)和欧洲瞬态循环(ETC)条件下的台架实测数据对模型进行检验,基于最大离散程度、拟合度和计算时间3个指标对模型进行评价和比较。结果表明,考虑催化器与废气和周围环境对流换热的温度模型具有良好的预测精度和实时性,更适合用于SCR控制策略。     

低温独立液舱曲面外板加工减薄量评估

基于耐低温合金材料的非线性特性,以某液化气船的低温独立液舱曲面外板加工成形过程为研究对象,研究其塑形变形过程及机理。利用ABAQUS作为计算分析工具,建立了板材原料及上、下加工模具的分析模型,给定冲压成形的时间和初始速度,并设定时间步长,考察每个时间步长的计算结果,分析了其加工过程中的弹塑性变形过程,评估了低温合金材料在加工过程中的板厚变化情况,并与实际加工测量值进行对比,验证了模型和计算分析过程的准确性。为各类低温独立液舱的设计和材料尺寸选用提供了技术支持和指导。