重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

HXD1型机车自动驾驶系统设计与应用

主要介绍HXD1型交流传动电力机车的自动驾驶系统方案设计与应用情况,以机车改动最小、成本最低为原则,通过加装自动驾驶系统设备、通信及供电线缆实现自动驾驶功能。通过机车自动系统的成功运用,降低了人工劳动强度,杜绝了人为失误因素,提升了机车操纵水平和操纵一致性。     

Does transport help people to gain employment? A systematic review and meta-analysis of the empirical evidence

ABSTRACT

The role of transport in providing access to employment has received considerable attention. Since transport policies may be motivated by assumed effects on employment probability outcomes, it is important to establish the nature of the relationship between transport and employment outcomes. While the majority of the empirical evidence suggests a positive association, it is not conclusive or consistent and often shows mixed results. To address this confusion, our study has systematically reviewed this evidence base and synthesised it through meta-analysis. We first identified 93 studies that quantitatively assessed the impact of transport on employment outcomes. By systematically merging the empirical evidence, this study establishes a positive association between transport and employment outcomes, with varying effects for four identified categories of transport measures (or combinations thereof): car ownership, public transport access, commute times, and job accessibility levels. This positive association persists in studies that control for endogeneity between transport and employment, but a larger evidence base is needed to establish a more robust relationship, in particular for cities and smaller (rural) areas outside the US-context and with regard to public transport. We then selected 20 methodologically comparable studies for inclusion in the meta-analysis. Our meta-regression models clearly demonstrate that car ownership significantly increases individual employment probabilities, in particular among welfare recipients. Young drivers benefit from access to household cars when these are not in use by their parents, and they are more sensitive to the time and cost implications of longer commutes. While our systematic review suggests that better access to public transport and higher levels of job accessibility increases employment probabilities, meta-regression analysis requires more consistent transport measures. The findings in this study are important for policymakers in that they imply that job seekers may benefit from public policies targeted at improving their access to public transport, in particular for people without access to cars and in areas with fewer job opportunities.     

Heteroscedastic Gaussian processes for uncertainty modeling in large-scale crowdsourced traffic data

Accurately modeling traffic speeds is a fundamental part of efficient intelligent transportation systems. Nowadays, with the widespread deployment of GPS-enabled devices, it has become possible to crowdsource the collection of speed information to road users (e.g. through mobile applications or dedicated in-vehicle devices). Despite its rather wide spatial coverage, crowdsourced speed data also brings very important challenges, such as the highly variable measurement noise in the data due to a variety of driving behaviors and sample sizes. When not properly accounted for, this noise can severely compromise any application that relies on accurate traffic data. In this article, we propose the use of heteroscedastic Gaussian processes (HGP) to model the time-varying uncertainty in large-scale crowdsourced traffic data. Furthermore, we develop a HGP conditioned on sample size and traffic regime (SSRC-HGP), which makes use of sample size information (probe vehicles per minute) as well as previous observed speeds, in order to more accurately model the uncertainty in observed speeds. Using 6 months of crowdsourced traffic data from Copenhagen, we empirically show that the proposed heteroscedastic models produce significantly better predictive distributions when compared to current state-of-the-art methods for both speed imputation and short-term forecasting tasks.     

Human-like autonomous car-following model with deep reinforcement learning

This study proposes a framework for human-like autonomous car-following planning based on deep reinforcement learning (deep RL). Historical driving data are fed into a simulation environment where an RL agent learns from trial and error interactions based on a reward function that signals how much the agent deviates from the empirical data. Through these interactions, an optimal policy, or car-following model that maps in a human-like way from speed, relative speed between a lead and following vehicle, and inter-vehicle spacing to acceleration of a following vehicle is finally obtained. The model can be continuously updated when more data are fed in. Two thousand car-following periods extracted from the 2015 Shanghai Naturalistic Driving Study were used to train the model and compare its performance with that of traditional and recent data-driven car-following models. As shown by this study’s results, a deep deterministic policy gradient car-following model that uses disparity between simulated and observed speed as the reward function and considers a reaction delay of 1 s, denoted as DDPGvRT, can reproduce human-like car-following behavior with higher accuracy than traditional and recent data-driven car-following models. Specifically, the DDPGvRT model has a spacing validation error of 18% and speed validation error of 5%, which are less than those of other models, including the intelligent driver model, models based on locally weighted regression, and conventional neural network-based models. Moreover, the DDPGvRT demonstrates good capability of generalization to various driving situations and can adapt to different drivers by continuously learning. This study demonstrates that reinforcement learning methodology can offer insight into driver behavior and can contribute to the development of human-like autonomous driving algorithms and traffic-flow models.     

铁路货物追踪系统的构建

铁路货物运输组织是铁路工作的一个核心内容,铁路货物追踪系统的设计与实现能够为货主提供更好、更快的服务,同时加快和保障铁路货运工作的组织。通过对铁路整车货物运输的流程分析,制定货物追踪系统的目标,分析系统功能。通过数据的采集和信息共享平台的建立,提出货物追踪系统的实现途径。     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives

The main task for heavy haul railway operators is to reduce the cost of exported minerals and enhance the long-term viability of rail transport operations through increasing productivity by running longer and heavier trains. The common opinion is that this is achievable by means of implementation of high adhesion locomotives with advanced AC traction technologies. Modern AC high adhesion locomotives are very complex mechatronic systems and can be designed with two alternative traction topologies of either bogie or individual axle controls. This paper describes a modelling approach for these two types of AC traction systems with the application of an advanced co-simulation methodology, where an electrical system and a traction algorithm are modelled in Matlab/Simulink, and a mechanical system is modelled in a multibody software package. Although the paper concentrates on the analysis of the functioning for these two types of traction control systems, the choice of reference slip values also has an influence on the performance of both systems. All these design variations and issues have been simulated for various adhesion conditions at the wheel–rail interface and their influence on the high traction performance of a locomotive equipped with two three-axle bogies has been discussed.     

北京市小汽车交通发展研究

首先对北京市小汽车发展的历程进行了回顾,接着分析了现状和特点,并对北京市小汽车发展引发的诸多经济社会问题进行了反思。认为当前小汽车发展是超前消费,超过了经济发展速度,与城市化发展不协调,小汽车在交通出行结构中所占比例过高,加重了交通拥堵,给资源、环境造成了沉重的负担和影响。从可持续发展的理念出发,北京市小汽车发展的总体策略应该是：适量拥有、合理使用。政府管理部门要树立“公交优先”的思想,采取各种管理手段缓解交通拥堵,减少交通事故。     

甘泉铁路区间通过能力研究

阐述甘泉铁路车站分布和运量发展情况及货运量增加后区间通过能力不足的问题,介绍甘泉铁路行车组织和区间通过能力计算方法,计算各区间的通过能力,结合近期货物运量500万t、700万t、1000万t三种情况,计算需求通过能力,并给出提高通过能力的具体方案,为下一步货运量的增加做准备。