高速公路计重收费模型研究及改进

首先通过对我国各省计重收费模型进行比较,选择出较为合理的计重收费模式;其次,从正常装载和超限装载运输车辆两个方面对云南省计重收费模型进行分析与研究,并且利用在计重收费调研中积累的经验与数据对此模型进行实施后评价,得出该模型存在的不足;再次,着重从正常装载优惠区间的划分、超限装载加收系数的确定,同时结合面积原理,对云南省...     

城市轨道交通发展探讨

根据我国国民经济飞速发展、城市交通严重滞后、国内大中城市兴起轨道交通热潮的现状 ,综合评述了城市轨道交通发展的动力 ,包括节约能源 ,有利于可持续发展 ,充分利用城市空间 ,改善交通安全状况 ,方便快速和及时准确等方面。同时 ,提出我国城市轨道交通发展需要重视的几个问题     

日本轨道交通与土地的综合开发

分析日本国土开发利用、轨道交通建设运营、以及轨道交通与土地综合开发的成功经验。日本是世界上人口密度最大的国家,采取以轨道交通为骨干的公共交通为主导的城市发展策略,由于轨道交通建设经营主体的多元化,铁道主业与其它产业的兼营,特别是轨道交通与土地的综合开发利用,成功的解决了城市交通问题,实现了轨道交通的商业化建设与运营,实现了城市经济、社会、环境、交通的协调发展。     

论实施拥堵收费政策的必要性——以巴黎、伦敦和斯德哥尔摩的交通政策为例

针对我国大城市是否有必要实施拥堵收费政策这一热点问题,首先分析巴黎、伦敦城市形态对交通供需、拥堵情况、交通政策的决定性影响.根据巴黎、伦敦和斯德哥尔摩的经验,探讨拥堵收费政策是否是缓解交通拥堵的必选之策.分析从规划入手论述了缓解拥堵、发展公共交通和自行车交通等缓解交通拥堵方法的有效性和可行性,就我国大城市交通发展的最优、必选和可选之策提出建议.     

物流中心选址规划方案评价方法

在分析了物流中心规划影响因素之后,构建了物流中心规划方案的评价指标体系。根据各评价指标特点,采用逐对比较法确定指标权重系数,提出运用灰色关联度分析法、关联矩阵法、模糊综合评判法对物流中心规划方案进行综合评价,并着重论述了其具体实施过程。结合某市物流中心规划方案实例评价分析,发现不同方法各有利弊,均能从不同角度对规划方案进行评价。结果表明,在物流中心规划中可采取多种评价方法综合评价,以避免采用单一评价方法评价带来的刚性,从而减少决策失误。     

红水河滚装运输方式价值研究

文章针对红水河运输需求大与通航设施能力小的矛盾。提出新型的滚装运输方式,介绍了滚装运输的线路、车型、船型选择方法。并通过与公路、铁路等运输方式在运价、运能及资源综合利用率方面的比较,论述了滚装运输方式的经济价值和社会价值。     

大型综合交通枢纽指路标志系统设置研究

城市大型综合交通枢纽由于其功能多样,辐射广泛,周边路网复杂,因此对其指路标志系统需要专门设计。文章以上海市虹桥综合交通枢纽指路标志系统为研究对象,从路网结构及交通流特性出发,将指路标志系统按出行者需求层次分为四级,并提出相应的指路标志设置原则及方法,供相关部门参考。     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

城市公共交通发展的动力机制研究

城市公共交通发展动力涵盖政府的主导作用、公交运营企业的主动力、公众的支持力以及营销传播的助动力等"四方力量",四方力量的协同推动城市公共交通系统快速发展。首先对城市公共交通发展的动力机制进行分析,研究快速发展面临的困境以及进行公共交通系统动力协调的必要性;然后提出强化政府主导作用的"4P"发展策略、激发公交运营企业主动力的品牌服务策略、拓展公众支持力的乘客关系管理策略、发挥营销传播助动力的促销策略等公共交通协同发展策略;由此增强公共交通竞争力,提高公交出行方式分担率,推动城市可持续发展。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.