Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

兰新高铁甘青段路基冻胀自动监测及分析研究

为查明兰新高铁甘青段路基冻胀变形原因和影响因素,提出相应的冻胀处理措施,将路基冻胀变形控制在允许范围之内,采用自动监测系统,对路肩以下5 m范围内路基的冻结深度、水分、冻胀变形等进行监测,并对监测结果进行统计分析和深入研究。研究结果表明:路基冻结深度的发展主要受气温的影响,基床表层以下填料含水量随着冻结深度增加缓慢增加;基床表层及基床底层上部1.0 m范围冻胀量占总冻胀量的80%以上;低路堤地段冻胀最严重。为减少路基冻胀量,设计及施工时应采用全冻结深度防冻胀方案,以填料防冻胀为主,辅以防水、疏水和隔热等综合措施;低路堤地段防冻胀措施应适当加强。     

考虑围岩蠕变特性的TBM隧道管片衬砌受力特性研究

为研究深部高地应力岩层中修建TBM隧道时管片衬砌结构的力学行为,以某深埋TBM工法隧道为研究对象,建立基于围岩蠕变和管片分块效应的衬砌-围岩复合模型,研究考虑时间效应下管片衬砌的受力特性。结果表明:考虑围岩蠕变效应下管片衬砌受力表现出明显的时间效应。随着围岩蠕变时间的延长,管片衬砌的形变、内力和接缝张开量均呈现两阶段增长,具体表现为前期呈线性增长,后期增加趋缓。洞周围岩应力经历三阶段变化,即先减小后增大直至稳定。围岩蠕变时间为100年时,管片衬砌的内力和形变量均接近极限值。研究结果可为深部高地应力且考虑围岩蠕变效应下的TBM隧道衬砌结构设计提供参考。     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。     

62310轴承故障的应对方法

以DK16A地铁电动车辆牵引电机62310轴承故障为例,分析了故障成因,并对相应的措施进行了论述。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

烟大铁路轮渡渡船电力推进系统仿真分析

随着计算机仿真技术在工程研究领域的广泛应用,船舶电力系统数字仿真已成为高效的船舶电力系统分析手段.烟大火车渡船采用了当今国际先进的电力推进系统,通过对该系统进行了数字仿真分析,验证了该船电网运行的稳定性和可靠性.     

鞍形板水火加工工艺参数预报方法研究

利用氧乙炔焰或其他热源的水火弯板工艺,广泛应用于船体外壳的建造.本文应用鞍形板水火加工工艺参数的数学模型,结合曲板成型所需局部收缩量的理论计算结果,进行了鞍形板水火加工工艺参数预报方法的研究,并在此基础上建立了预报系统.该预报系统能够给出鞍形板加工焰道的合理布置方案和加工工艺参数.通过算例证明该系统具有工程使用价值.     

SS7型客货运电力机车（1）：特点及技术参数

SS7型客货两用相控电力机车采用B_0-B_0-B_0转向架,全叠片复励牵引电动机及相应的主电路和电子控制系统、壳式卧放主变压器、再生制动等多项新技术,具有近代相控机车的先进求平。本文介绍该型机车的基本特点和主要技术参数。