罕遇地震作用下高速铁路减隔震简支梁桥合理计算模型的探讨

以往在分析减隔震桥梁的地震响应时,由于考虑到桥墩和基础应保持弹性工作状态,在基于强度的设计中偏于安全考虑桥墩一般采用毛截面刚度建立弹性梁单元模型。实际上,在罕遇地震作用下,桥墩墩底截面虽然未达到屈服状态,仍然会出现保护层混凝土开裂,并导致桥墩刚度降低。此时,应考虑对桥墩刚度进行适当修正以估计桥梁的各项地震响应参数,这也有利于实现减隔震桥梁基于位移的抗震设计。结合西部高速铁路中典型的简支梁桥结构形式,分别采用弹塑性纤维梁柱单元、弹性梁柱单元、考虑刚度修正的弹性梁柱单元模拟桥墩建立3种计算模型,探讨适用于罕遇地震作用下的高速铁路减隔震桥梁的合理计算模型。结果表明,当罕遇地震作用下桥墩位移延性超过0.5时,考虑刚度修正的弹性梁柱单元模拟桥墩的计算模型能够较好地估计桥梁各项地震响应参数。     

Structural safety of trams in case of misguidance in a switch

Tram vehicles mainly operate on street tracks where sometimes misguidance in switches occurs due to unfavourable conditions. Generally, in this situation, the first running gear of the vehicle follows the bend track while the next running gears continue straight ahead. This leads to a constraint that can only be solved if the vehicle's articulation is damaged or the wheel derails. The last-mentioned situation is less critical in terms of safety and costs. Five different tram types, one of them high floor, the rest low floor, were examined analytically. Numerical simulation was used to determine which wheel would be the first to derail and what level of force is needed in the articulation area between two carbodies to make a tram derail. It was shown that with pure analytical simulation, only an idea of which tram type behaves better or worse in such a situation can be gained, while a three-dimensional computational simulation gives more realistic values for the forces that arise. Three of the four low-floor tram types need much higher articulation forces to make a wheel derail in a switch misguidance situation. One particular three-car type with two single-axle running gears underneath the centre car must be designed to withstand nearly three times higher articulation forces than a conventional high-floor articulated tram. Tram designers must be aware of that and should design the carbody accordingly.     

高速铁路进站节能坡设计方法研究

在线路纵断面的设计中引入节能坡设计理念,对优化线路纵断面设计、降低牵引能耗值和节省运营支出具有重要意义。根据高速铁路的特点,提出高速铁路进站节能坡的设计方法和计算算法,给出计算流程,确定各影响参数的约束条件。开发进站节能坡设计程序模块,实现多参数化的进站节能坡设计。在此基础上,采用计算机仿真分析方法,对车站坡段坡度、车站中心至节能坡变坡点距离、动车组编组质量、进站制动力使用系数、节能坡进入初始速度5个主要影响因素进行计算和仿真分析,确定各因素对进站节能坡的影响程度,为进站节能坡的设计提供参考和依据。     

Vibration control in train–bridge–track systems

To study the problems associated with vibration control of train–bridge–track systems a mathematical model with the capability of representing supplementary vibrational control devices is proposed. The train system is assumed as rigid bodies supported on double-deck suspension mechanism with semi-active features. The bridge system is modeled using the modal approach. Vibration control for bridge responses is provided by tuned mass dampers. A non-classical incremental Eigen analysis is proposed to trace the system characteristics across the time. In an example, the capability of the proposed model in investigating the vibration control prospects of a bridge–train system is shown. The results indicate the effectiveness of active suspension mechanism in reducing train's body movements, particularly the pitching angle and the vertical accelerations. Accordingly, the results also verify the potential of TMD devices in reducing the bridge responses at resonance motions.     

高速磁浮线高速道岔驱动布置的研究

介绍了世界上首副电机驱动、齿轮齿条传动高速磁浮线高速道岔的驱动布置方案。通过几何非线性分析,对不同驱动布置方案下高速道岔转辙过程的特性进行对比,得到了支点到位位置偏差小,线形、主梁应力和驱动力变化平缓,经济性好的驱动布置方案。     

Airline network choice and market coverage under high-speed rail competition

While the existing literature has focused on the short-term impacts, this paper investigates the long-term impacts of high-speed rail (HSR) competition on airlines. An analytical model is developed to study how an airline may change its network and market coverage when facing HSR competition on trunk routes. We show that prior to HSR competition, an airline is more likely to adopt a fully-connected network and cover fewer fringe markets if the trunk market is large. Under HSR competition, the airline will, for a given network structure, have a greater incentive to cover more fringe (regional or foreign) markets if the trunk market is large, or the airline network is close to hub-and-spoke. Further, the airline will, for any given market coverage, move towards a hub-and-spoke network when the trunk market is large, or the number of fringe markets covered by the airline network is large. Both effects are more prominent when the decreasing rate of airline density economies is large. We further show that HSR competition can induce the airline to adopt network structure and market coverage that are closer to the socially optimal ones, thereby suggesting a new source of welfare gain from HSR based on its long-term impacts on airlines. Implications for operators, policy makers and specific countries (such as China) are also discussed.     

双控道岔联系电路的设计与实现

在个别站场间,为节省占地面积或受其他因素制约,两站的联锁区是由一组双动道岔隔开。若其中一站为计算机联锁控制,另一站为6502电气集中控制,依据相关设计规范,设计出一套计算机联锁车站与6502电气集中车站利用渡线隔开时的结合电路。该结合电路安全可靠,未改变原有电路定型结构。经过联锁模拟实验,该设计方案合理可行。     

高速铁路生命周期碳排放计算方法

基于生命周期评价理论,对高速铁路生命周期二氧化碳排放计算的边界进行界定,将高速铁路的生命周期划分为基础设施建造、运营和回收3个阶段；根据对各阶段高速铁路二氧化碳排放清单的分析,分别给出各个阶段二氧化碳排放的计算式；通过算例分析了高速铁路在建造和运营阶段碳排放的特点.分析和数值计算结果表明,虽然在高速铁路基础设施建设过程中由于大量建设材料和高能耗施工机械的使用,使得高速铁路建造阶段的二氧化碳排放量相对较多；但是,由于高速铁路具有节约能源、节省土地和货运增量替代效应等特点,使得高速铁路进入运营阶段后二氧化碳的排放量大幅度减少,即从生命周期全过程来看,高速铁路具有较好的减排效果.     

高速铁路施工安全质量管理实践

介绍全面质量管理理论和8项管理原则,结合高速铁路施工情况,提出高速铁路安全质量管理原则、＂分级管理＂模式和＂四方控制＂机制,总结高速铁路施工安全质量管理实践经验,认为其核心是充分发挥高层领导、工程建设指挥部、监理单位、施工单位等各自特点的管理方式,介绍安全质量管理应用的具体案例。     

高速铁路双向点式信息交互系统设备的研究

从双向点式信息交互系统提出的背景及其基本构成出发,研究系统的地面和车载两个不同部分的系统构架。分析系统的关键部件———双向传输天线,根据N圈环的辐射电阻和耗损电阻的计算公式,讨论双向传输天线的效率。确定天线的有效作用范围为670mm,有效水平耦合时间为8ms。室内静态模拟试验结果显示,在8ms有效时间内,接收总帧数与接收正确帧数均为8帧1024bit数据。现场动态试验结果与室内静态模拟基本相同,验证了有效水平耦合时间与可接收数据量的关系。