Pro/E在减速顶中的应用

通过对三维建模软件Pro／E各种强大功能的简要介绍，指出Pro／E在当今生产行业中的重要作用，同时详细介绍了Pro／E在减速顶行业中的广泛应用。     

巴哈马车客渡船设计简介

本船作为车客渡船具有多用途、多任务的特点,适应性强.该文从型线设计、总体布置、稳性计算等方面,概要介绍了本船的一些设计特点.     

能效设计指数EEDI功率曲线的直接计算方法

船舶能效规则强制生效后，所有适用船舶必须满足Attained EEDI≤Requied EEDI的条件，因此准确估算或预报功率曲线从而计算得到Attained EEDI将对适用船型具有极为重要的意义。根据国内外关于功率-转速-航速预报的最新进展，依据螺旋桨敞水性能图谱，采用KT/J^2系数，给出了功率曲线的直接计算方法，经实际算例验证，该方法相对传统的间接计算方法更为清晰简便，且结果准确可靠。     

基于AutoCAD技术的气割机DNC系统研究

基于对AutoCAD环境下的DNC数控气割机系统的研究，通过对零件图纸→图形文件形成→加工程序的生成→自动加工几个过程的分析，完整地介绍了该系统的工作原理，为经济型数控机床的改造和生产提供可参考的理论模式。     

Tangential force variation due to the bogie direction reversal procedure

A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

基于MATLAB/SIMULINK交流电机系统的建模与仿真

在传统电机理论的基础上，使用Matlab/Simulink动态仿真软件建立了交流电机及逆变器系统的仿真模型，给出了系统静态、动态过程的仿真数据及实验波形，结果表明，由此建立的系统运行可靠，响应快，可以在仿真研究中使用.     

基于插件技术实现遥测数据事后处理系统软件

针对不同型号导弹遥测数据事后处理方法存在差异,系统软件需要不断进行调整的问题,引入插件技术,将各类数据处理方法通过动态链接库设计成插件,方便软件的修改和功能扩充,满足遥测数据事后处理软件多样化特点,提高系统软件二次开发效率.     

Spectral entropy analysis of different alpha band rhythms in relation to hand motor imagery

The event-related desynchronization/synchronization(ERD/ERS) time courses of lower and upper alpha band rhythms during hand motor imagery are investigated respectively by Fourier Sectral Entropy (FSE) in this paper. By analyzing one group of BCI competition data, it was found that FSE within upper alpha band displays a pronounced increase and decrease over contralateral and ipsilaterai brain areas respectively at the onset of hand motor imagery, which is corresponding to the antagonistic ERD/ERS patterns in previous studies. Different from the upper alpha activity pattern, FSE within lower alpha band displays a consistent increase over both two hemispheres hand representative areas. The preliminary results show that FSE could disclose the different behaviors of the upper and lower alpha band rhythms so that a new idea with the complexity measure is provided to characterize functional dissociation of lower and upper frequency alpha rhythms in relation to hand motor imagery.     

Ni—P—SiC化学复合镀层中SiC均匀共析的最佳参数研究

研究了镀复条件及工艺配方对 N-P-SiC 化学复合镀层中 SiC 均匀共析的影响.结果表明,Nj-P 合金基体中 SiC 微粒子均匀共析的最佳条件是:温度87±1℃,搅拌速度600r/min·K,pH=4.8,SiC 平均粒径 D_p=3.5μm,SiC 的添加量8g/L,析出速度12～14μm/h.本文还测定了镀层的显微硬度及磨损量,并用扫描电镜观察了磨损前后的表面形貌和结构.