深埋大断面黄土隧道初期支护受力特征分析

为避免初期支护局部破坏对深埋黄土隧道安全产生危害,依托甘肃省境内早胜3号隧道施工开展深埋大断面黄土隧道初期支护受力规律的现场试验研究。通过埋设振弦式传感器对围岩与初期支护接触压力、喷射混凝土应变、钢拱架应变、相邻钢拱架间作用力进行监测,同时建立模拟隧道施工的有限元计算模型,分析得到初期支护内力分布特点。结果表明： 1) 初期支护受力随时间表现出迅速增长—缓慢增长—逐渐稳定的特点,曲线在二次衬砌闭合12 d后基本稳定; 2)应力空间分布上部大下部小,偏压特性明显,荷载理论计算值偏小; 3) 拱顶及边墙区域为初期支护薄弱部位,需采取措施并加强监控量测; 4)数值计算表明锚杆末端轴力较小,设计中可考虑适当缩短锚杆长度。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

封堵三通卡球原因分析及封堵设备改进设计

文中简述了某天然气管道A站-B站段内检测通球过程中封堵三通处出现的卡堵问题,结合通球、封堵等工程实践,对卡球原因进行了分析,发现了塞堵的设计缺陷,通过理论计算提出了塞堵的优化设计,解决了塞堵无旋转限位的问题,并对优化设计后期实践应用可能存在的问题提出了解决办法,对天然气管道带压封堵、通球,提高输气效率等具有参考意义。     

斜向波浪对斜坡堤胸墙作用力的试验研究

斜坡堤胸墙的稳定性主要受到波浪作用的影响,而且实际工程中斜坡堤多受斜向波浪作用。通过斜向与正向不规则波对斜坡堤胸墙作用的物理模型试验研究,分析斜坡堤单个胸墙所受的斜向波浪总力的折减系数随水位和波浪入射角度的变化规律,并与斜向波浪对单元直立堤的作用情况进行对比。结果表明:斜坡堤单个胸墙所受的斜向波浪总力的折减系数总体上随着水位的降低而变小,随着波浪入射角度的减小而变小;斜向波浪总浮托力的折减系数一般小于总水平力的折减系数;在不同水位和波浪入射角下,斜坡堤单个胸墙所受的斜向波浪总力的折减系数与单元直立堤有一定差别。     

拖曳球体尾流效应内波表现特征及其产生机理研究

采用PIV技术对分层流体中拖曳球体尾流及内波的流场进行了测量,捕捉到了清晰的尾流效应内波的流场图像。尾流效应内波不规则,有一定的随机性,迟于模型出现,呈"V"字形,波长较短,且不随内傅氏数明显变化,与体效应内波特征差异明显。通过对尾流激发内波过程的分析,发现尾流效应内波与尾涡结构紧密相关,试验测量的内波波长与St数决定的涡间距吻合,验证了尾涡激发内波是尾流效应产生内波的一种机制。     

超大型油轮系缆力实测研究

为满足超大型船舶在开敞式码头不利的环境要素下安全系泊作业,该文从影响超大型油轮(VLCC)系缆力因素的实际出发,利用构建的系缆力实测平台对VLCC进行有针对性的现场系缆力实际测量。将得到的系缆力实测数据利用一定的数据处理方法进行处理,得出超大型船舶系缆力在特定现实环境要素下的受力曲线,分析出不同于前人理论研究和操作经验的观点和结论,并针对各条结论提出建议,供船舶和工程人员参考。     

潜航体激发类开尔文内波的垂向数值纹影实验研究

运用垂向数值纹影实验技术(NSS_V),研究了潜航体模型在线性分层流体中激发内波的形态特征,测量了类开尔文V形内波的张角、航行方向内波波长 λx与内弗罗德数(Fr=U/DN)之间的关系.实验表明:V型内波张角随着弗罗德数增大而减小,在Fr=1附近出现一个异常缓变平台;波峰线相关波长 λx与弗罗德数呈线性关系:λx=8.57Fr+1.74.对比实验表明潜航体的指挥塔对三维内波流场影响主要表现为其体积效应及角区的湍流尾迹效应.     

船闸闸室结构的船-墙碰撞三维有限元分析

以江苏某重力式船闸闸室结构为例,采用ABAQUS软件建立船舶-闸室结构-土体三维有限元模型,对船舶撞击闸室进行瞬态动力分析,得到不同工况下的撞击力时程曲线和撞击力值等结果。研究结果表明:船舶撞击闸室的法向平均撞击力大小与船舶排水量的12次方、撞击速度的1次方、撞击角度的1次方成线性关系;将软件模拟的船舶法向撞击力数值与依据JTJ 307—2001《船闸水工建筑物设计规范》得到的计算值比较,发现规范公式得到的数值普遍偏小,低估了过闸船舶撞击力的影响。