某船用柴油机SCR尿素喷射系统结构参数仿真优化

在建立的SCR系统三维仿真模型基础上,首先通过仿真性能分析,初步确定了尿素喷嘴位置、喷孔直径、喷孔数目及喷射方向等尿素喷射结构参数范围,然后采用正交试验法确定尿素喷射结构参数仿真试验方案。以NO_X转化率为优化目标,通过极差分析和方差分析得到优化的尿素喷射结构参数方案为:喷嘴与催化剂入口距离为7倍管径,喷嘴孔数为6孔,喷嘴孔径为0.6 mm,喷射锥角为30°。     

基于CCP协议的大功率高压共轨柴油机安全控制系统设计

以某10000kW大功率高压共轨电控柴油机为研究对象,实现柴油机状态参数的在线控制、标定和实时循环采集,并阐述CCP通信应用层协议的应用技巧和开发过程。该系统功能完备且稳定性好,为整机综合电控系统的开发提供通信基础平台,能明显缩短较复杂的大系统研发周期,可广泛应用于工程项目中。     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

构建西江现代物流体系 打造世界加工制造次中心

文章基于当前产业结构大调整背景,提出广西要在迎接产业转移的竞争中胜出,必须着力构建以西江水运为龙头的现代物流体系,从而把西江经济带打造成为与＂珠三角＂这一世界加工制造中心紧密联动的加工制造次中心。     

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.     

Severity of injury resulting from pedestrian–vehicle crashes: What can we learn from examining the built environment?

This paper examines the impact of personal and environmental characteristics on severity of injuries sustained in pedestrian–vehicle crashes using a generalized ordered probit model. The data covers 2000–2004 of pedestrian–vehicle crashes taken from police incident reports for Baltimore City and supplemented with local land use, urban form and transportation information specific to the individual crash locations. The results on personal and behavioral variables confirm previous findings. Women pedestrians involved in crashes tend to be injured less frequently than their male counterparts; children have an increased likelihood of sustaining injuries and older persons are more likely to be fatally injured. Pedestrians who cross against the traffic signal, are not in a crosswalk and are involved in a crash after dark are associated with greater injury risk. Of the built environment policy variables of interest, transit access and greater pedestrian connectivity, such as central city areas, are significant and negatively associated with injury severity. These results suggest that the environmental conditions should be given more scrutiny and be an important consideration when evaluating and planning for pedestrian safety.     

隆林新洲养护站边坡稳定性分析

文章利用SLOPE／W模块,基于确定值方法和可靠度理论的极限平衡法．对隆林新洲养护站边坡在不采取支挡措施和采用锚索抗滑桩支挡措施情况下,如何保持边坡稳定性进行了对比分析。     

高校建筑招投标管理审计的思考

在实际招投标管理审计工作中,通过收集、整理、分析、归纳,提出如何加强招投标管理机构、制度建设、招标文件、评标方法及合同审计等几点建议,探讨加强招投标管理审计工作的途径.     

轨道安全监测中传感器优化配置研究

为了研究轨道结构安全监测中传感器的合理配置方法,确保城市轨道交通安全运营,通过建立桥上交叉渡线道岔模型和钢轨应变传递误差最小的目标函数,提出传感器测点选择依据和监测方案评价标准,保证监测方案的经济性、合理性。结论表明:模型数据曲线可以指导监测系统的测点位置选择;随着传感器测点数量增加,监测误差逐渐减小,但在误差比率的拐点后增加单位个数传感器带来的收益降低;通过建立误差最小准则的目标函数,结合误差指标可以评价和优化传感器布设方案;钢轨位移、附加力等指标的监测方案也可以通过本文方法确定。     

基于模糊层次的铁路混装货物装运安全评价研究

随着客户运输需求的多样化升级,采用铁路混装货物装运模式在提升铁路运输效率、吸引多样货源等方面相较于单一品名装运显示出一定的优越性,同时混装货物装运面临的安全压力相较于单一品名装运出现骤增。为保障铁路混装货物装运安全,在阐述混装货物装运特点及安全控制要点的基础上,从人防物防技防3方面构建混装货物装运安全评价指标体系,采用层次分析法确定各指标权重,并利用模糊综合评价法对铁路混装货物装运安全进行评价,通过实例验证该评价方法的实用性及有效性,为铁路混装货物装运安全评价提供依据。