2300客位／2500m车道客滚船照明设计

2300客位／2500m车道客滚船是上海船舶研究设计院为国内船东设计的大型客滚船,具有甲板层数多、面积大、房间多、载客量大的特点。船舶照明设计的合理性是影响船舶正常航行及应对紧急情况的重要因素。简要介绍了2300客位／2500m车道客滚船的照明灯具及其相应安装场所,分析了全船正常照明、应急照明、航行灯信号灯的布置和系统设计,并对其所涉及的规范规则进行了系统化的阐述。     

��·Эͬ�µ�·������źſ����Ż�����

车路协同系统能实时获取车辆个体的运行状态信息,并能通过速度引导实现车辆与交通控制系统之间的动态交互,为交通信号控制提供了新的数据源和技术手段.分析了现有车路协同下交通信号控制方法存在的不足,引入基于时间窗的滚动预测方法,提出了改进的交叉口信号控制优化流程;将相位饱和度作为表征信号控制效果的指标,在考虑速度引导对车辆运行状态影响基础上,建立了车路协同环境下道路交叉口信号控制优化方法和模型.运用VISSIM软件进行了仿真实验,结果表明,本文方法优于感应控制方法,在各种交通流量下均能有效降低交叉口平均延误和停车次数.     

录音技术在铁路频率信号测试领域的应用

ZPW-2000A系列低频信号丰富、载频种类多,专用测试机具价格贵。因此,提出将录音技术用于铁路频率信号测试领域,建立标准频率信号资源库,替代低频信号源。以ZPW-2000A、UM71系列设备的检测为例,介绍标准频率信号资源库的原理、制作和应用。     

Asynchronous n-step Q-learning adaptive traffic signal control

Ensuring transportation systems are efficient is a priority for modern society. Intersection traffic signal control can be modeled as a sequential decision-making problem. To learn how to make the best decisions, we apply reinforcement learning techniques with function approximation to train an adaptive traffic signal controller. We use the asynchronous n-step Q-learning algorithm with a two hidden layer artificial neural network as our reinforcement learning agent. A dynamic, stochastic rush hour simulation is developed to test the agent’s performance. Compared against traditional loop detector actuated and linear Q-learning traffic signal control methods, our reinforcement learning model develops a superior control policy, reducing mean total delay by up 40% without compromising throughput. However, we find our proposed model slightly increases delay for left turning vehicles compared to the actuated controller, as a consequence of the reward function, highlighting the need for an appropriate reward function which truly develops the desired policy.     

气胎离合器状态信号非接触耦合及监测装置的设计与试验

在深入分析气胎离合器常用的电刷.滑环接触式信号装置存在的缺陷的基础上,提出采用非接触式信号耦合传输技术的改进思路和实现方法,设计和研制了信号耦合和处理电路板,试验结果表明,非接触式信号耦合技术可解决传统的接触式信号传输方法在舰船特殊工作环境下不可避免的问题.     

隧道内设置车站时信号系统方案探讨

结合新建金华至台州铁路工程磐安至里林站区间隧道内车站设置方案研究,对车站联锁、运输调度指挥、集中监测等信号系统方案进行了研究和探讨。     

调车信号机白灯灯丝检查的探讨

在信号机点灯电路中,灯丝继电器只检查点灯灯丝的情况,不检查另外一个灯的情况。在不影响现有设备稳定性和安全性的前提下,对实时检查调车信号机白灯灯丝的情况进行探讨。     

机车感应电台运用中的问题探讨

在 DJ 型交直交电力机车上安装400kHz 感应电台后,电台运用不良。原因在于 DJ 型电力机车受电弓对接触网上的传输信号有旁路作用,同时机车的高压供电回路产生的交流谐波分量很多,因而产生较大的干扰信号,对感应电台产生的有用信号有较强的干扰所致。经改造,在供电回路加装400kHz 信号阻波器后,电台使用正常。     

A technical note on evaluating the effectiveness of bus rapid transit with transit signal priority

Transit Signal Priority (TSP) and Bus Rapid Transit (BRT) are innovative Intelligent Transportation System (ITS) tools that can reduce travel times for buses. Combining TSP and BRT can significantly improve bus travel, but can negatively impact network traffic operations. Although TSP has been implemented worldwide, few previous studies holistically examined the effects of using various conditional and unconditional TSP strategies with or without a BRT system. This research simulates multiple TSP and BRT combination scenarios to understand their impact on traffic operations, including crossing street traffic. A test bed along International Drive (I-Drive) in Orlando, Florida, was chosen as the simulation area. Field data collected for this test bed, which included traffic volumes, bus travel times, and traffic signal control data, were used to develop, calibrate, and validate the simulation model. Results showed that BRT with Conditional TSP 3 minutes behind significantly improved travel times, average speed, and average total delay per vehicle for the main through movements compared with no BRT or TSP, with only minor effects on crossing street delays. BRT with Unconditional TSP resulted in significant crossing street delays, especially at major intersections with high traffic demand, indicating that this scenario is impractical for implementation. The simulation suggests that BRT and TSP will be most effective when used in areas where crossing street volumes are low. However, it is unknown how these ITS tools affect pedestrian traffic. Using optimization methods can determine the best strategy to balance transit and pedestrian traffic.     

高分辨率罗兰C天波延迟估计新技术

提出了一种基于特征分解的多信号分类算法估计罗兰C接收机天波延迟的信号处理新技术。它为接收机基准点的实时设置提供了一种新方法。常规接收机为了防止天波干扰，将基准点设置在一个固定位置上，导致基准点处信噪比受包络限制而较低，从而大大增加了对准基准点的时间。利用这项技术，我们在低信噪比条件下分离出了地波和天波的到达时刻。这就使得接收机能根据天波延迟变化实时选择基准点最佳位置，并能利用地波到达时刻进行周期选择。由于此法有助于增加基准点处的信噪比，减少对准基准点的时间，因而能极大地提高现有罗兰C接收机的性能。还显示了新方法较IFFF方法有更高的分辨率。