不同间隙比竖井内水流与平衡重二维流固耦合

目前,水力式升船机在国内外尚无投入实际运行,无实际设计、安装、运行经验可循。建立不同间隙比竖井与平衡重之间二维流固耦合数学模型,在非恒定流作用下,对不同间隙比时平衡重上升过程的水动力响应进行动态模拟。得出有利于该类升船机稳定运行的最优间隙比。     

吹填土对筒型基础结构工作性能的影响

针对吹填土对筒型基础结构工作性能影响的问题,进行三维有限元模拟研究。采用大型通用有限元软件ABAQUS建立筒型基础结构与吹填土相互作用的三维弹塑性模型,模拟在波浪荷载和不同厚度吹填土作用下筒型基础结构各点土压力的变化趋势,揭示筒壁所承受土压力的分布规律以及不同厚度吹填土的影响。该结果为防波堤的筒型基础结构稳定性验算提供了依据。     

压载荷下骨材贯穿孔孔边应力集中模型试验

以船舶双层底结构为研究对象开展模型试验,研究板材中的开孔在承受压力载荷作用下的孔边应力分布情况,分析压力载荷下不同开孔孔型以及不同补强结构对孔边应力分布情况的影响。在此基础上,开展相关仿真分析,将试验结果与有限元仿真结果进行对比,验证有限元仿真的准确性。     

深水SPAR风机系统全耦合动力响应分析研究

文章采用联合开发的计算程序对深水SPAR风机的浮体、锚泊和风机各子系统进行了水—气动力的全耦合数值分析,研究了深水浮式风机系统的动力响应特点。浮体水动力计算采用基于二阶精度的混合波浪模型(Hybrid Wave Model)的MORISON公式,锚泊系统采用细长杆理论通过非线性有限元方法实现,风机系统的空气动力分析采用基于多体气动弹性理论的FAST模块。以浮体控制方程为主体,通过模块间的载荷与位移传递在每个时间步上迭代求解,形成完全耦合的时域分析方法。通过对NREL的5MW SPAR风机系统在随机海况下的水动力响应分析,验证了该方法的有效性,并分析了浮式风机子系统间的混合动力作用。     

基于气液两相流解析模型的水冲压发动机推进特性分析

给出了喷管中气液两相流动等温正压模型的解析解。基于该解析模型以及水冲压发动机内流道几何参数,迭代求解了发动机在一系列工况下的推进特性。研究表明,水冲压发动机的推力、效率、比冲随着气相质量流量以及航速的共同提高而提高,单单增加航速或单单增加气体质量流率,都会使得比冲和效率先增后减。单单增加气体质量流率,水流流量减小,推力增加,但是耗气量显著增加。单单增加航速,水的流量增加,推力将先增后减。     

Interpreting employee telecommuting adoption: An economics perspective

Travel demand is derived from activities at the trip destination; therefore, media that have the potential to provide services previously only supported by transportation will have a chance to be chosen by passengers. The idea of telecommuting is considered the most promising substitute of work trips and thus a good strategy of transportation demand management. From a microeconomics perspective, demand for goods or services can be interpreted as a function of prices and generalized income. Therefore, telecommuting adoption is viewed as a trade-off among the prices of telecommuting itself, substitutes, and complements, as well as generalized income and situational constrains incurred by the employee. The underlying rationale is interpreted by elasticity analysis of aggregate telecommuting demand, based on an adoption model, with respect to various decision variable. The results indicate that the elasticity with respect to the price that the employee may incur in order to telecommute is the largest one, and the elasticity with respect to the living space at home is the second one. Additionally, all of the elasticities found in the group of employees currently commuting by private transportation are greater than the corresponding ones found in the group of transit riders. These findings are expected to have significant implications of transportation policies. This revised version was published online in June 2006 with corrections to the Cover Date.     

Evolution of latent modal captivity and mode choice patterns for commuting trips: A longitudinal analysis using repeated cross-sectional datasets

This paper presents an investigation of the temporal evolution of commuting mode choice preference structures. It contributes to two specific modelling issues: latent modal captivity and working with multiple repeated crossectional datasets. In this paper latent modal captivity refers to captive reliance on a specific mode rather than all feasible modes. Three household travel survey datasets collected in the Greater Toronto and Hamilton Area (GTHA) over a ten-year time period are used for empirical modelling. Datasets collected in different years are pooled and separate year-specific scale parameters and coefficients of key variables are estimated for different years. The empirical model clearly explains that there have been significant changes in latent modal captivity and the mode choice preference structures for commuting in the GTHA. Changes have occurred in the unexplained component of latent captivities, in transportation cost perceptions, and in the scales of commuting mode choice preferences. The empirical model also demonstrates that pooling multiple repeated cross-sectional datasets is an efficient way of capturing behavioural changes over time. Application of the proposed mode choice model for practical policy analysis and forecasting will ensure accurate forecasting and an enhanced understanding of policy impacts.     

地面注汽管线表面散热损失影响因素分析

文中采用Fluent模拟与理论计算结合比较的方法,研究了不同因素对蒸汽管道散热损失的影响规律,并分析了理论计算模型的相对误差.发现增加注汽管线距地面高度,对其散热损失影响较弱;空气温度升高,注汽管道表面散热损失降低;风速和表面发射率对注汽管线表面热损失影响较大;数值模拟结果与理论计算数据相对误差较大.     

优化GM（1,1）模型在连续刚构桥施工监控中的应用

文章结合优化GM（1,1）模型用于罗天乐大桥施工监控的工程实例,介绍了优化GM（1,1）模型的原理、计算方法及计算过程,并根据实际监控经验提出了建议。罗天乐大桥的具体施工监控实践表明,优化GM（1,1）模有着较高的预测精度,能较好地应用于大跨度连续刚构桥的施工监控。     

Comparative analysis of household car,motorcycle and bicycle ownership between Osaka metropolitan area,Japan and Kuala Lumpur,Malaysia

The interactions among different types of vehicle ownership including car, motorcycle and bicycle are examined by developing simultaneous vehicle ownership models in this study. Large scale person trip survey data for Osaka metropolitan area, Japan and Kuala Lumpur, Malaysia are used for empirical analysis. The results suggest that population density at residential area significantly and negatively affects car ownership for both areas, and that the effects are larger for Osaka metropolitan area than for Kuala Lumpur. Also, bicycle ownership becomes higher at higher population density area for Osaka area, while higher at lower population density area for Kuala Lumpur, which represents the different usage patterns of bicycle between the two areas.