基于MATLAB/SIMULINK交流电机系统的建模与仿真

在传统电机理论的基础上，使用Matlab/Simulink动态仿真软件建立了交流电机及逆变器系统的仿真模型，给出了系统静态、动态过程的仿真数据及实验波形，结果表明，由此建立的系统运行可靠，响应快，可以在仿真研究中使用.     

Spectral entropy analysis of different alpha band rhythms in relation to hand motor imagery

The event-related desynchronization/synchronization(ERD/ERS) time courses of lower and upper alpha band rhythms during hand motor imagery are investigated respectively by Fourier Sectral Entropy (FSE) in this paper. By analyzing one group of BCI competition data, it was found that FSE within upper alpha band displays a pronounced increase and decrease over contralateral and ipsilaterai brain areas respectively at the onset of hand motor imagery, which is corresponding to the antagonistic ERD/ERS patterns in previous studies. Different from the upper alpha activity pattern, FSE within lower alpha band displays a consistent increase over both two hemispheres hand representative areas. The preliminary results show that FSE could disclose the different behaviors of the upper and lower alpha band rhythms so that a new idea with the complexity measure is provided to characterize functional dissociation of lower and upper frequency alpha rhythms in relation to hand motor imagery.     

Ni—P—SiC化学复合镀层中SiC均匀共析的最佳参数研究

研究了镀复条件及工艺配方对 N-P-SiC 化学复合镀层中 SiC 均匀共析的影响.结果表明,Nj-P 合金基体中 SiC 微粒子均匀共析的最佳条件是:温度87±1℃,搅拌速度600r/min·K,pH=4.8,SiC 平均粒径 D_p=3.5μm,SiC 的添加量8g/L,析出速度12～14μm/h.本文还测定了镀层的显微硬度及磨损量,并用扫描电镜观察了磨损前后的表面形貌和结构.     

金融危机下中国大中型客车的出口对策

分析金融危机下中国客车出口情况、国际市场、国际竞争对手的现状及中国客车出口下滑的原因；预测中国客车出口的趋势，并提出应对危机的对策。     

Virtual test rig to improve the design and optimisation process of the vehicle steering and suspension systems

A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.     

港口装卸设备远程监控系统

港口装卸设备日益大型化、高速化、自动化.如何能高效快捷地监控港口装卸设备的运行装态,对提高装卸效率、提高码头吞吐量至关重要.文章介绍基于Web的B/S模式的港口设备远程监控系统,具有简单、高效、跨平台等优点;可进行实时监测和控制,实现由上而下的集中管理、分散控制;特别是能够通过互联网络实现远程的监测.对港口企业远程监控系统的建设具有一定的参考作用.     

自备客车空调系统的安装与调试

论述自备客车的运行特点，空调与客车匹配的基本要求，发动机动力要求，空调系统制冷量输出与发动机转速的匹配等问题，确定了安装空调的客车和空调的型号，并对安装后的空调运行进行了调试。     

窄轨机车车体的结构优化研究

本文应用结构优化软件 MCADS,对某米轨机车车体结构进行了优化设计,在满足强度和刚度的条件下,减轻重量14.6%.     

基于PC/104的数据记录仪的设计与应用

为了实现对船舶重要装置的监测,设计一种基于PC/104的数据记录仪.该数据记录仪分为上位机和下位机两部分.上位机采用VC++编程,实现对该重要装置的数据记录获取、故障分析等功能.下位机采用PC/104模块和Windows CE实现对该装置的数据采集、记录、声光报警.该数据记录仪的采集速度为10 kHz,精度为0.2%.由于充分融合了PC/104模块,Windows CE的优点,该记录仪具有监测稳定性好,可靠性高,全程自动化程度高和操作简单等特点,已成功应用于船舶的重要装置中.     

以太网技术在列车通信网络中的应用探讨

基于现有列车通信网络(TCN)不能完全满足信息传输的情况,提出了工业以太网和CAN总线共存的方案,介绍了基于高性能数字信号处理器TMS320F206的工业Ethernet的硬件接口电路、CAN/Ethernet网关模型等。