智能船舶集成设计技术

针对符合CCS《智能船舶规范》入级符号的船舶设计开发,研究分析智能船舶集成设计技术的设计思想、设计要素、设计框架和关键技术,设计目标船解决方案,并讨论了未来需要突破技术方向。     

宁波-舟山港梅山港区滚装及杂货码头工程设计要点

宁波-舟山港梅山港区滚装及杂货码头工程拟建位置建设条件复杂。采用理论计算和模型试验等方法,对项目选址、码头轴线方位的确定、码头前沿顶高程的确定及水工结构设计等关键技术进行研究,得出的结论可供类似工程参考。     

船舶螺旋桨作用下直立式码头的护底流速计算

针对船舶螺旋桨对直立式码头的护底冲刷作用愈来愈严重,而我国的港口工程规范中缺乏该类设计的计算的问题,进行了螺旋桨作用下直立式码头的护底流速研究。采用国外各类规范以及相关文献的计算方法,以正在实施的科特迪瓦阿比让扩建项目一期工程为例,对比总结出直立式码头底部的护底冲刷流速的荷兰计算方法和德国计算方法,给直立式码头结构的护底设计提供依据。     

增大泥泵最大球形通道的方案

增大泥泵最大球形通道可以提升疏浚工程连续性,减少堵泵的风险,提高疏浚施工效率。泥泵最大球形通道和泥泵效率是泥泵设计中的矛盾点。针对上述问题通过调研提出了两种增大泥泵最大球形通道方案,采用数值模拟方法计算了3种方案的泥泵内部流场。通过对数值模拟结果的统计分析,对比3种方案泥泵的性能。确定了增大泥泵最大球形通道叶轮设计方案,为后续泥泵改造提供基础。     

Locating rental stations and bikeways in a public bike system

To determine the spatial distribution of rental stations and bikeways in a public bike system, this paper proposes a facility location and network design model. The model is developed as a multi-objective programing problem that considers four objectives (minimizing cyclist risk, maximizing cyclist comfort, minimizing adverse impacts on traffic and maximizing service coverage) and multiple constraints (monetary budget, network connectivity, station spacing, bikeway types, station number and value ranges of decision variables). The ε-constraint method solves the programing problem for the public bike system in Daan District, Taipei City, Taiwan. The nine non-dominated alternatives generated are all markedly better than existing locations of rental stations and bikeways. Scenario analysis results indicate that increasing the construction budget for bikeways significantly improves cyclist safety and comfort whilst increasing the adverse impact on traffic. Planners can use this model to develop public bike systems that spatially integrate rental stations and bikeway networks.     

Formulating cargo inventory costs for liner shipping network design

This study examines how to incorporate the inventory costs of containerized cargoes into existing liner service planning models such that the designed networks could be improved while not causing extra modeling/computational burden. Two approaches are compared: (i) not considering the inventory costs at all and (ii) incorporating the inventory costs associated with onboard time and those related to transshipment by assuming a fixed connection time. The two models are compared with the ideal model capturing the exact inventory costs on a route choice problem and a capacity planning problem based on extensive randomly generated and practical numerical experiments. The results show that: first, ignoring the inventory costs in service planning models may lead to network design with much higher costs (poor network design decisions); second, in service planning models assuming weekly frequency, the inventory costs associated with onboard time could be formulated exactly, and those related to the connection time of weekly services could be approximated by assuming fixed connection time of 3.5 days for ports with 1 day’s minimum connection time and 4.5 days for ports with 2 days’ minimum connection time.     

袋装固化土筑堤在沿海涂面整理工程中的应用

受制于砂石等建筑材料匮乏,浙江沿海围垦工程推进困难,寻找合适的替代材料迫在眉睫。因地制宜,就地取材,利用滩涂丰富的黏土资源,形成袋装固化土筑堤技术。即利用滩涂淤泥为原料,添加固化剂充灌袋体作为堤心代替砂石料等常规材料修建围堤。通过对固化土工程特性和袋装固化土围堤在外部荷载作用下的稳定情况进行研究,结合台州已建固化土围堤的经验和试验及检测资料,提出合理的计算方法,为固化土筑堤设计方法的建立提供可靠的依据。     

整治建筑物周边局部冲刷深度计算

针对现有局部冲刷深度经验公式多、适用范围小、计算结果与实际出入较大的问题,从冲刷机理上推导出通用的局部冲刷公式,并根据实际情况进行修正和确定相关参数。结果表明,整治建筑物周边局部冲刷深度主要与工前水深、工程前后流速变幅、水流紊动强度、流量调整情况等有关;冲刷公式中参数k、λ、n的取值对计算结果影响较大;修正后的公式与规范相比具有一定优势。     

制动器在水力式升船机中的应用

依托景洪升船机工程,探讨水力式升船机制动器的应用。通过对比分析电力驱动和水力驱动式升船机制动器的布置特点及工作方式,阐述制动器在水力式升船机中面临的新的技术问题,据此对水力式升船机制动器的制动力、同步性以及制动方式提出设计指标和要求,并探讨制动器的使用范围。建议水力式升船机制动器采用常开式,升船机正常运行时,制动器在船厢上、下游对接时投入使用。     

基于GIS的航道辅助设计平台的设计与实现

基于航道地理空间特性和航道设计相关规范及工作流程,选用Arc GIS作为基本框架,经多项关键技术开发构建而成航道辅助设计平台。平台具有自然条件分析、河床演变分析、航道尺度计算及选线布置等设计功能,并配置水深数据识别、地形坐标转换等通用工具,可对航道基础数据和设计成果进行综合管理,初步实现专业间设计协同,基本达成航道设计工作的标准化和提高工作效率的目标。