公路工程招投标实行履约保证金制度研究

目前我国公路建设市场广泛使用履约保证金制度,文章分析了履约保证金与投标保证金的差异及实行履约保证金制度的正面影响和负面效应,总结了加强保证金管理的相关措施,提出健全履约保证金制度的相关建议,对规范招投标市场行为和净化招投标市场环境以及预防和惩罚腐败都有着重要而深远的意义。     

Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.

Railway reforms: do they influence operating efficiency?

This paper considers railway operations in 23 European countries during 1995–2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the efficiency of the railway systems. Efficiency is measured using Multi-directional Efficiency Analysis, which enables investigation of how railway reforms affect the inefficiencies of specific cost drivers. The main findings are that the reform initiatives generally improve technical efficiency but potentially differently for different cost drivers. Specifically, the paper provides empirical evidence that accounting separation is important for improving the efficiency in the use of both material and staff costs, whereas other reforms only influenced one of these factors.

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.     

Estimation of origin-destination matrices from link counts and sporadic routing data

Estimation of origin-destination (OD) matrices from link count data is a challenging problem because of the highly indeterminate relationship between the observations and the latent route flows. Conversely, estimation is straightforward if we observe the path taken by each vehicle. We consider an intermediate problem of increasing practical importance, in which link count data is supplemented by routing information for a fraction of vehicles on the network. We develop a statistical model for these combined data sources and derive some tractable normal approximations thereof. We examine likelihood-based inference for these normal models under the assumption that the probability of vehicle tracking is known. We show that the likelihood theory can be non-standard because of boundary effects, and provide conditions under which such irregular behaviour will be observed in practice. For regular cases we outline connections with existing generalised least squares methods. We then consider estimation of OD matrices under estimated and/or misspecified models for the probability of vehicle tracking. Theoretical developments are complemented by simulation experiments and an illustrative example using a section of road network from the English city of Leicester.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.     

Augmented Reality Vehicle system: Left-turn maneuver study

Augmented Reality “AR” is a promising paradigm that can offer users with real-time, high-quality visualization of a wide variety of information. In AR, virtual objects are added to the real-world view in real time. The AR technology can offer a very realistic environment for enhancing drivers’ performance on the road and testing drivers’ ability to react to different road design and traffic operations scenarios. This can be achieved by adding virtual objects (people, vehicles, hazards, and other objects) to the normal view while driving an actual vehicle in a real environment. This paper explores a new Augmented Reality Vehicle “ARV” system and attempts to apply this new concept to a selected traffic engineering application namely the left-turn maneuver at two-way stop-controlled “TWSC” intersection. This TWSC intersection experiment, in addition to testing the feasibility of the application, tries to quantify the size of gaps accepted by different driver’s characteristics (age and gender). The ARV system can be installed in any vehicle where the driver can see the surrounding environment through a Head Mounted Display “HMD” and virtual objects are generated through a computer and added to the scene. These different environments are generated using a well defined set of scenarios. The results from this study supported the feasibility and validity of the proposed ARV system and they showed promise for this system to be used in the field-testing for the safety and operation aspects of transportation research. Results of the left-turn maneuver study revealed that participants accepted gaps in the range of 4.0-9.0 s. This finding implies that all gaps below 4 s are rejected and all gaps above 9 s are likely to be accepted. The mean value of the left-turn time was 4.67 s which is a little bit higher than reported values in the literature (4.0-4.3 s). Older drivers were found to select larger gaps to make left turns than younger drivers. The conservative driving attitude of older drivers indicates the potential presence of reduced driving ability of elderly. Drivers’ characteristics (age and gender) did not significantly affect the left-turn time. Based on the survey questions that were handed to participants, most participants indicated good level of comfort with none or small level of risk while driving the vehicle with the ARV system. None of the participants felt any kind of motion sickness and the participants’ answers indicated a good visibility and realism of the scene with overall good system fidelity.     

A model for the visualization and analysis of elevator traffic

ABSTRACT

Analysis of elevator traffic in high rise buildings is critical to the performance evaluation of elevator group control systems (EGCS). Elevator dispatching methods or parking algorithms in an EGCS can be designed or modified according to analyses of traffic flow. However, interpretation of traffic flow based solely on numerical data may not be explicit and transparent for EGCS experts as well as for other non-expert building administration. In this study, we present a model for visualization and analysis of elevator traffic. First, we present an alternative approach for traffic analysis which we call route visualization. In the proposed approach, we initially decompose elevator traffic into its component parts and investigate each component independently. Then, using superposition of components we obtain a reconstructed model of overall traffic. This modeling approach provides component-based traffic analysis and representation of routes with intensities through data visualization. In the second part we introduce a multi-dimensional analysis of time parameters in ECGS. This approach provides a comparative analysis of several control algorithms such as dispatch or park algorithms for different combinations of traffic components.     

Prediction of travel time variability for cost-benefit analysis

Unreliable travel times cause substantial costs to travelers. Nevertheless, they are often not taken into account in cost-benefit analyses (CBA), or only in very rough ways. This paper aims at providing simple rules to predict variability, based on travel time data from Dutch highways. Two different concepts of travel time variability are used, which differ in their assumptions on information availability to drivers. The first measure is based on the assumption that, for a given road link and given time of day, the expected travel time is constant across all working days (rough information: RI). In the second case, expected travel times are assumed to reflect day-specific factors such as weather conditions or weekdays (fine information: FI). For both definitions of variability, we find that the mean travel time is a good predictor. On average, longer delays are associated with higher variability. However, the derivative of variability with respect to delays is decreasing in delays. It can be shown that this result relates to differences in the relative shares of observed traffic ‘regimes’ (free-flow, congested, hyper-congested) in the mean delay. For most CBAs, no information on the relative shares of the traffic regimes is available. A non-linear model based on mean travel times can then be used as an approximation.     

缆索吊装系统在钢桁架拱桥上构施工中的应用

文章以新世纪大桥主桥钢桁架上构施工为例,对施工所需缆索吊装系统的承重主索、塔架、地锚、扣挂体系进行了介绍,并阐述了利用缆索吊装系统进行钢桁架拱桥上构施工的工艺流程及技术要点。