钢箱梁U肋嵌补段疲劳开裂机理与养护措施研究

某大型悬索桥为主跨1650 m的两跨连续钢箱梁悬索桥,加劲梁采用扁平流线型分离式双箱。近2年在正交异性板钢箱梁顶板U肋嵌补段发现焊缝开裂状况,为研究及处治该病害,采用大型有限元程序ANAYS进行局部仿真计算,分析焊缝开裂后的应力分布规律、影响范围。结果表明:重车轮压的疲劳荷载、施工焊接质量等是嵌补段焊缝开裂的主要原因;钢箱梁顶板U肋嵌补段焊缝开裂会对邻近结构抗力产生影响,U肋嵌补段开裂使相邻U肋嵌补段焊缝应力增加11.8%,使U肋与顶板之间焊缝主拉应力增加57%,使邻近位置的横隔板弧形缺口主拉应力增加6%。根据分析结果建议尽早处治焊缝开裂问题,短期养护措施推荐在低应力区打止裂孔和设置临时支撑架,长期养护措施建议刨去已开裂焊缝后补焊、嵌补段整体切割后补焊和改用高强度螺栓连接方式。     

地铁牵引供电框架保护及功能性改造

针对广州地铁1号线不能远程区分框架保护类型和不能远程复归的状况,结合西门子S5系列PLC技术、SINAUT技术、牵引供电技术,对框架保护进行功能性改造,大大减少了框架保护故障的处理时间.改造技术方案主要通过研究数据的传递方式、协议转换、控制逻辑关系,修改组态软件、监控程序、接口程序、PLC程序的方式来实现.     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

U型管式换热器的质量控制

U型管式换热器属于列管换热器的一种,被广泛应用在循环水冷却高温气体装置中。根据U型管式换热器的结构特点和技术原理,针对设备在使用过程中可能出现的问题,在整个材料采购和制造过程中,对换热器中管板制造加工、U型管成形及换热管与管板的焊接等制造的关键和难点予以质量控制,保证产品质量,使设备按设计要求制造完毕后安全有效地运行。     

Breakthrough innovations in intermodal freight transport

Breakthrough innovations, whether technological, organizational or both, are a necessity if the market share of intermodal freight transport is to expand. The main growth potential lies in the markets for flows over short distances, for perishable and high-value commodities, for small consignments, and for flows that demand speed, reliability and flexibility. It will take radical innovations to produce a breakthrough in the modal split and allow these new markets to be conquered. This special issue is based on papers presented at an international conference on freight transport automation and multimodality, held in Delft in May 2002, that are illustrative of the direction of breakthrough research and development (R&D) aimed at increasing the market share for intermodal transport.     

Discussions on rail in urban areas and rail history

This paper includes discussions on rail in urban areas and railway history. More specifically commonly used terms and definitions for rail services, policy and practice in urban areas are discussed followed by an overview of railway developments around the world.     

Use of combinatorial auctions in the railway industry: Can the “invisible hand” draw the railway timetable?

Rail capacity is currently administratively allocated in Europe, whereas the economic literature has often contemplated the opportunity of introducing market mechanisms, auctions in particular, into this industry. This article tries to fill the gap between practice and theory. It first describes the properties of rail capacity (rigidity and non-homogeneity) and shows that because of its very nature, this capacity must be allocated through combinatorial auctions. As identified by the economic literature, using combinatorial auctions introduces a lot of complexity (winner determination and information burden) into the allocation process. To deal with this complexity, some form of centralized planning is necessary to design the right market mechanisms and to allocate capacity. This could have strong consequences on the current deregulation process.     

RS20型交换机的配置方法

对RS20交换机的配置进行探索研究具有很强的实用性,重点介绍了RS20交换机在轨道交通无线通信系统中的应用,通过不断的实践摸索,初步掌握了一套快速配置RS20交换机的方法,并对这种配置方法进行了探讨.     

美国施工区交通管理的关键技术和策略

施工期间的交通组织管理是项目成功的基本保证。通过对施工区基本交通分析技术入手,深入阐述了美国施工区交通管理的量化指标、管理程序,及公众信息、旅行者信息、事件管理、施工策略和需求管理等5大基本管理策略。对全面了解美国施工区交通组织和管理实践,提高我国道路施工期间的交通组织和管理水平具有重要的借鉴意义。     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.