Discussions on rail in urban areas and rail history

This paper includes discussions on rail in urban areas and railway history. More specifically commonly used terms and definitions for rail services, policy and practice in urban areas are discussed followed by an overview of railway developments around the world.     

Use of combinatorial auctions in the railway industry: Can the “invisible hand” draw the railway timetable?

Rail capacity is currently administratively allocated in Europe, whereas the economic literature has often contemplated the opportunity of introducing market mechanisms, auctions in particular, into this industry. This article tries to fill the gap between practice and theory. It first describes the properties of rail capacity (rigidity and non-homogeneity) and shows that because of its very nature, this capacity must be allocated through combinatorial auctions. As identified by the economic literature, using combinatorial auctions introduces a lot of complexity (winner determination and information burden) into the allocation process. To deal with this complexity, some form of centralized planning is necessary to design the right market mechanisms and to allocate capacity. This could have strong consequences on the current deregulation process.     

RS20型交换机的配置方法

对RS20交换机的配置进行探索研究具有很强的实用性,重点介绍了RS20交换机在轨道交通无线通信系统中的应用,通过不断的实践摸索,初步掌握了一套快速配置RS20交换机的方法,并对这种配置方法进行了探讨.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

辗压混凝土机械化施工的体会

本文以交通部第二公路工程局1990年在安徽省312国道进行辗压混凝土施工中,如何解决诸如辗压混凝土路面结构、路面平整度、摊铺厚度、混合料级配、离析的影响以及自卸车倒料、压实、运输与摊铺等问题,并参考有关资料,进一步探讨了辗压混凝土施工工艺及施工机械的合理配套.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

扁平双边肋主梁桥梁断面气动导纳互功率谱识别方法探讨

以湖北荆沙长江大桥为背景,通过紊流场测力试验对气动导纳的互功率谱识别法进行了研究。通过与传统方法比较,发现互功率谱法计算得到的等效气动导纳整体上偏低,且低于Sears函数,但随折减频率变化的趋势上看,与传统算法无明显差异。由互功率谱法计算得到的复气动导纳计算抖振力,并进行频谱分析,与实测抖振力自功率谱比较发现,计算得到的抖振力自功率谱随折减频率变化的趋势与实际抖振力自功率谱吻合较好,但存在一定数量上的差异。通过对紊流度为6%、10%、20%的三种紊流场中-5°~+5°风攻角下计算值与实验值的比较发现,计算抖振力谱与实际抖振力谱的相对差异没有随紊流度和来流风攻角变化而变化的趋势,且相对差值较为稳定。     

城市轨道交通客流密集度指数研究

基于轨道交通物联网监测数据，从点、线、面三个层级，构建不同时间粒度车站、线路、网络的客流密集度指数计算模型和算法。车站客流密集度指数模型综合考虑影响车站密集度指数的关键区域（出入口、站台、楼扶梯、换乘通道）的拥挤程度和拥挤范围因素；线路的客流密集度指数模型综合考虑车站和区间的影响；网络的客流密集度指数模型由各线路的客流密集度指数加权得到。测试结果表明，提出的模型计算结果与实际地铁客流出行规律一致，可较好地反映地铁拥挤程度，为地铁客流运营拥挤状态评价和辅助决策提供技术支持。     

京津冀一体化轨道交通协调发展研究和展望

京津冀协同发展上升为国家战略,需要区域轨道交通协调发展来支撑和服务于区域一体化发展。从京津冀协同发展空间布局及产业转移的角度出发,提出各种轨道交通的层次及服务功能,在此基础上对轨道交通协调发展研究提出应抓住规划,处理好既有轨道交通与新增轨道交通、客货运主要通道与交通引导(TOD)、各种轨道交通间协调衔接等方面关系;加快投融资改革,实施同步建设;创新体制,实现管理协调发展;加大政策扶持,达到轨道交通可持续发展等方面进行研究,同时对区域轨道交通进行展望,对京津冀一体化轨道交通协调发展研究方向、研究领域和空间进行了浅议。     

浅谈香港西铁项目计划管理

香港西铁项目投资规模巨大，工程复杂。为确保工程能按时完工，投入运营，参与各方秉承科学计划管理理念、采用先进技术精心组织实施，业主在招标阶段制定了一套完善的计划管理体系，承包商能够利用先进技术编制了全面、详细、形象的施工计划并加以实施，咨询工程师能够严格把关，协调各方关系，确保了项目顺利完工。