Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

城市轨道交通客流密集度指数研究

基于轨道交通物联网监测数据，从点、线、面三个层级，构建不同时间粒度车站、线路、网络的客流密集度指数计算模型和算法。车站客流密集度指数模型综合考虑影响车站密集度指数的关键区域（出入口、站台、楼扶梯、换乘通道）的拥挤程度和拥挤范围因素；线路的客流密集度指数模型综合考虑车站和区间的影响；网络的客流密集度指数模型由各线路的客流密集度指数加权得到。测试结果表明，提出的模型计算结果与实际地铁客流出行规律一致，可较好地反映地铁拥挤程度，为地铁客流运营拥挤状态评价和辅助决策提供技术支持。     

京津冀一体化轨道交通协调发展研究和展望

京津冀协同发展上升为国家战略,需要区域轨道交通协调发展来支撑和服务于区域一体化发展。从京津冀协同发展空间布局及产业转移的角度出发,提出各种轨道交通的层次及服务功能,在此基础上对轨道交通协调发展研究提出应抓住规划,处理好既有轨道交通与新增轨道交通、客货运主要通道与交通引导(TOD)、各种轨道交通间协调衔接等方面关系;加快投融资改革,实施同步建设;创新体制,实现管理协调发展;加大政策扶持,达到轨道交通可持续发展等方面进行研究,同时对区域轨道交通进行展望,对京津冀一体化轨道交通协调发展研究方向、研究领域和空间进行了浅议。     

基于西门子802D系统的磨床数控化改造

介绍利用西门子公司的数控设备SINUMERIK 802D数控系统对SS-13缓进磨床进行数控改造的方案以及设计内容.     

浅谈香港西铁项目计划管理

香港西铁项目投资规模巨大，工程复杂。为确保工程能按时完工，投入运营，参与各方秉承科学计划管理理念、采用先进技术精心组织实施，业主在招标阶段制定了一套完善的计划管理体系，承包商能够利用先进技术编制了全面、详细、形象的施工计划并加以实施，咨询工程师能够严格把关，协调各方关系，确保了项目顺利完工。     

Passenger railway reform in the last 20 years - European experience reconsidered

It is about 20 years since the rail reform process in Europe began with the separation of infrastructure from operations in Sweden. This paper reviews the entire process, examining the objectives of reform, the different models adopted, and the key elements of separation of infrastructure from operations, competition both through open access and franchising and regulation and infrastructure charging. It is concluded that separation of infrastructure from operations involves costs, but is the most effective way of achieving within mode competition. Where operations do not greatly overlap and open access passenger and freight are unimportant, leasing infrastructure to passenger franchisees may be effective, but the model of vertical integration as separate subsidiaries within a holding company structure makes it difficult to ensure a level playing field for new entrants and is only effective where the vertically integrated operator remains dominant.     

基于GT-Power和Simulink的柴油机各缸不均匀性闭环控制

为改善各缸工作不均匀性,以TBD314V8柴油机为研究对象,基于缸压计算得到的各缸IMEP和CA50作为反馈变量,控制变量为各缸的喷油量和喷油提前角,建立了GT-Power与Simulink联合仿真模型,通过模型分析了轨压、负荷和喷油提前角对爆压、IMEP和CA50不均匀率的影响,并对影响因素进行参数灵敏度量化分析,验证了闭环控制对各缸不均匀性的改善效果。结果表明：轨压对爆压、IMEP和CA50不均匀率影响较小;负荷对IMEP不均匀率影响最大,且随着负荷的增加呈线性下降;喷油提前角对爆压不均匀率和CA50不均匀率影响最大,且CA50不均匀率随着喷油提前角的增大呈线性增加。经过闭环控制后,各缸不均匀性得到明显改善。     

城市轨道交通对房地产价值的影响研究——以武汉市轨道交通为例

城市轨道交通是一种快捷、高效、节能环保的大容量城市客运交通方式,而且对于沿线房地产的开发具有巨大的带动作用.本文定性分析了城市轨道交通对房地产价值的影响机理,并采用地价影响函数模型,对武汉城市轨道交通1号线地价影响函数相关参数进行了标定.定量研究证实了城市轨道交通时房地产价值的拉动作用.最后提出了武汉市轨道交通与房地产...     

铁路500m长钢轨生产工艺流程及规模的探讨

针对目前铁路焊轨基地的实际,对长钢轨焊接工艺进行说明,通过工艺流程示意图,详细介绍铁路500 m长钢轨生产的工艺流程。原料为100、25 m钢轨时,分别计算日生产长钢轨能力,从而确定年生产规模。根据生产能力和实际调研,确定原料轨存轨台、长钢轨时效台、长钢轨成品台、工位规模及辊道线间距,为将来新建或改建长钢轨焊接基地提供数据参考。     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.