基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

基于云平台的城市轨道交通能源管理系统

阐述了基于云平台的城市轨道交通能源管理系统架构和建设方式。该系统利用云计算的高效和弹性来部署建设,采用线网-车站二层管理模式,降低了线网和线路服务器等的硬件部署成本和维护成本。通过将能源管理系统内部使用的业务应用转换为基于云平台的能源管理应用软件,能源管理系统可获取云平台提供的共享数据,并将经过业务处理后的数据存储到云平台中,以服务于云平台上其他业务,实现了数据资源的逻辑统一和高效利用。     

基于FLAC软件模拟强夯加固吹填砂地基

基于港区陆域吹填项目,采用FLAC软件建立三维模型,模拟了不同夯能、夯击次数对强夯效果的影响,对强夯前后杨氏模量的变化进行了分析研究。结果表明,表层吹填砂厚度和下卧软土层分布对夯能的大小起着决定作用。对于下卧松散砂层,可适当加大夯击能量和夯击次数(7~8击),增加其处理深度和效果;而对于下卧软黏土层,可以适当减小夯击能量并增加夯击次数,以提高加固效果。夯击之后,表层吹填砂的杨氏模量有较大的提高,从原来的10 MPa提高到20~40 MPa。     

The impact of land-use mix on residents' travel energy consumption: New evidence from Beijing

Policies that encourage mixed land use are widely believed to make transport more energy efficient. However, few studies have directly examined the impacts of land-use heterogeneity on travel energy consumption at the individual level. Moreover, the definition and measures of land-use heterogeneity are debated. This paper aims to fill these gaps using the large city of Beijing, China, as a case study. Three types of land use are examined in terms of their effects on individual residents’ travel energy consumption. The results suggest that high land-use diversity and a good jobs-housing balance significantly reduces commuting travel. Interestingly, highly heterogeneous retail and housing areas may have high travel energy use, as residents are more likely to go shopping. There are obvious spatial variations in these effects. Residents of suburban ‘newtowns’, where the jobs-housing balance is particularly good, consume less travel energy. The results suggest that decreased use of conventional planning patterns, such as the socialist danwei system, and increasing urban sprawl, bring new challenges to achieving transport efficiency. Mixed land-use policies can be an effective solution to these challenges.     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

柴油发动机掺烧生物柴油的经济性研究

为了更好地评价柴油机燃用生物柴油的经济性,分析了生物柴油和0#石化柴油的理化性质,分别对生物柴油的体积分数为0.2,0.5,1的B20、B50、B100 3种燃料和0#柴油在495Q3柴油机上进行了试验。试验结果显示燃用3种燃料的燃油消耗率比0#柴油在中小负荷时平均增加5.30%,9.65%,19.04%,大负荷时平均增加2.86%,4.75%,9.64%;能量等值折合油耗率在中小负荷时平均增加2.65%,2.63%,5.74%,大负荷时平均降低0.26%,1.97%,4.80%。     

Er~(3+)及Er~(3+)/Yb~(3+)掺杂YBa_3B_9O_(18)材料的发光性能

通过高温固相烧结法制备了Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉.X射线衍射结果表明,Er3+/Yb3+的掺杂并没有改变基质的六方结构.应用325 nm激光激发Er3+掺杂YBa3B9O18,观察到了Er3+离子的特征发射峰,证明了Er3+离子与基质间的能量传递.应用980 nm激光分别激发Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉,观测到了Er3+离子的上转换过程,该过程可通过能级图进行解释.实验结果表明Yb3+对Er3+的上转换发光有敏化作用.     

机动车交通流比功率与能耗模型研究

为研究机动车交通流能耗,将机动车交通流比功率(VSP)作为研究对象.从最常见的单车比功率研究出发,使用气体动力学交通流模型联系单车比功率与交通流整体比功率,以此建立交通流比功率模型.为使此模型具备更显著的物理意义,将交通流比功率分为两部分,一部分为平衡交通流状态下的比功率,另一部分为偏离平衡交通流状态导致的比功率变化量,模型中的交通流参数与变量能够通过现有的交通流探测设备获取.将比功率理论模型从单车扩展到了交通流,用数学公式反应了交通流状态与比功率的关系,并且证明了交通流比功率能够通过交通流参数进行估计.并由交通流比功率出发,推导出交通流比功公式.此外研究了平衡态交通流比功率及比功与密度的关系.为研究机动车交通流能耗探索了新的思路.