厂焊500m长钢轨生产工艺及单价分析

铁路列车速度越来越高,为保证列车运行的平稳性,轨道工程越来越多地采用无缝线路轨道技术。于是,厂焊500m长钢轨在铁路工程建设中得到广泛应用。为合理确定钢轨焊接标准单价,对既有焊轨基地生产线进行了调研,根据钢轨焊接工作内容、工艺,对所需人工、材料、设备及费用等进行统计分析与探讨,并由此提出工程建设可参考的钢轨焊接单价标准：目前100m定尺钢轨焊接单价约为4．3万元／km,25m定尺钢轨焊接单价约为5．95万元／km。     

平地机施工时平整度的控制与施工工艺

以“二级公路”施工为分析点，对平地机的特点进行分析，对施工工艺加以总结，就如何提高平地机的使用效率，如何提高其施工过程的平整度，如何达到所规定的质量技术指标进行探讨。     

埋地燃气管道综合检验检测技术研究

随着技术的进步以及国家能源政策的调整，埋地管道的安全运行日益得到了管道使用单位和政府相关职能部门的重视。综述了目前国内外常用的埋地钢质管道检验检测方法的原理及其优缺点，并结合作者的研究成果，提出了埋地管道综合检验检测技术组合方法。     

基于模糊神经网络的既有钢筋混凝土桥梁构件可靠性评估

介绍了模糊神经网络的基本理论知识,根据其知识体系和既有桥梁可靠性的研究特点,结合相关文献的规定和研究成果,引入与所检测的截面裂缝宽度、应变值和应变值相关的评估参数Z,利用既有钢筋混凝土桥梁养护等级标准给出了构件技术状况等级与可靠指标的对应关系,然后根据模糊神经网络的理论优势,对输入变量(实测数据:裂缝宽度,应变值和应变值)进行训练,计算出构件在不同荷载作用下的可靠指标,其可用于既有桥梁结构构件可靠性评估中。并结合一实桥拆除构件的试验结果,得到了一些有益的结论,验证了本方法应用于既有钢筋混凝土桥梁构件可靠性评估的可行性。     

客车张拉蒙皮的辊型设备结构设计和改进

通过对辊型设备的结构设计和改进，重点阐述两种辊型方法，以满足客车不同部位蒙皮成型的要求。     

Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions

Time-variant reliability analysis of a corroded bulk carrier in intact and damage conditions is performed by First-Order (FORM), Second-Order (SORM) Reliability Methods and Importance Sampling simulation. Annual failure probabilities are determined up to 25-year ship lifetime, accounting for time-variant corrosion wastage of structural members contributing to hull girder strength. Statistical properties of hull girder capacity are determined by Monte Carlo simulation, applying three correlation models among corrosion wastages of structural members contributing to hull girder strength, namely no correlation, full correlation and full correlation among wastages of structural members belonging to the same category of compartments. A modified incremental-iterative method is applied, to account for instantaneous neutral axis rotation, in case of asymmetrical damage conditions, as for collision and grounding events. Incidence of intact/damage condition, as well as correlation among corrosion wastages, on annual sagging/hogging time-variant failure probability is investigated and discussed. Time-variant sensitivity analyses for intact and damage conditions are also performed, to investigate the incidence of random variables' uncertainties on the attained failure probability. Finally, the bulk carrier section scheme, benchmarked in the last ISSC Report, is applied as test case.     

基于模糊层次的铁路混装货物装运安全评价研究

随着客户运输需求的多样化升级,采用铁路混装货物装运模式在提升铁路运输效率、吸引多样货源等方面相较于单一品名装运显示出一定的优越性,同时混装货物装运面临的安全压力相较于单一品名装运出现骤增。为保障铁路混装货物装运安全,在阐述混装货物装运特点及安全控制要点的基础上,从"人防""物防""技防"3方面构建混装货物装运安全评价指标体系,采用层次分析法确定各指标权重,并利用模糊综合评价法对铁路混装货物装运安全进行评价,通过实例验证该评价方法的实用性及有效性,为铁路混装货物装运安全评价提供依据。     

Are technology myths stalling aviation climate policy?

Emissions from aviation will continue to increase in the future, in contradiction of global climate policy objectives. Yet, airlines and airline organisations suggest that aviation will become climatically sustainable. This paper investigates this paradox by reviewing fuel-efficiency gains since the 1960s in comparison to aviation growth, and by linking these results to technology discourses, based on a two-tiered approach tracing technology-focused discourses over 20 years (1994–2013). Findings indicate that a wide range of solutions to growing emissions from aviation have been presented by industry, hyped in global media, and subsequently vanished to be replaced by new technology discourses. Redundant discourses often linger in the public domain, where they continue to be associated with industry aspirations of ‘sustainable aviation’ and ‘zero-emission flight’. The paper highlights and discusses a number of technology discourses that constitute ‘technology myths’, and the role these ‘myths’ may be playing in the enduring but flawed promise of sustainable aviation. We conclude that technology myths require policy-makers to interpret and take into account technical uncertainty, which may result in inaction that continues to delay much needed progress in climate policy for aviation.     

基于时间约束的铁路空车调配系统可靠性分析

为弥补现有铁路空车调配系统缺乏空车调配可靠性研究的缺陷,在传统空车调配优化模型的基础上,本文提出了一种新的基于时间约束的空车调配可靠性分析方法。通过深入分析铁路空车调配过程,建立效益最大化目标函数,生成约束条件,以规定时间内的实际到达空车数与需求空车数之比计算出各需求站的空车调配可靠性,再利用各需求站可靠性均值求解空车调配系统的可靠性。最后,使用LINGO软件进行算例分析,论证了该方法的可行性和有效性。     

船舶压载水处理技术和监督管理研究

船舶压载水不仅危害海洋环境还会对人类健康、当地经济造成影响,《国际船舶压载水和沉积物控制和管理公约》实施即说明了国际社会对此的重视。压载水处理系统的使用,有效地减小了压载水对环境的危害。然而在实际应用中,仍需要通过提高和改进压载水监控技术,使处理后的压载水进一步符合公约标准。本研究根据我国压载水监控现状,提出完善压载水监督管理的措施,促进我国环境、经济和资源的可持续发展。