基于桥梁挠度长期监测值的动态预测

文章针对重庆高家花园嘉陵江大桥实时健康监测系统的挠度长期监测数据,根据监测信息的时间序列呈季节、循环等非平稳状态特点,介绍采用ARMA时间序列预测模型,对挠度监测数据中所包含的外荷载的变化趋势及结构抗力的衰变信息进行动态预测,同时建立了结构外效应的预测函数。结果表明,采用低阶模型能对挠度监测值进行较好的动态预测。     

隧道围岩体内位移监测分析

隧道围岩体内位移监测结论对于判断围岩稳定性和保证施工安全与工程质量起着重要的作用。文章以一高速公路隧道为依托,介绍了围岩体内位移测量设备和工作原理,并通过对其围岩体内位移检测数据的分析,提出了隧道围岩体内位移监测的注意事项。     

BIM与GIS融合技术在航道整治工程中的应用

针对航道整治工程中BIM技术无法管理条带状工程、难以表达工程周边地理信息等难点,通过梳理BIM与GIS数据特点,研究探索BIM与GIS融合技术,提出了通过格式转换、坐标转换和数据关联实现BIM与GIS融合的方法。将研究成果应用在蕲春水道航道整治工程,验证了BIM与GIS融合方法的可行性,实现了BIM与GIS数据一体化浏览、显示、管理、分析等功能,解决了BIM无法管理大范围工程、无法反映工程周边环境的不足,为BIM与GIS技术在航道整治工程中的应用提供了技术支撑。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

汽车轻量化开展流程及方法研究

虽然国内汽车轻量化技术有了较快的发展,但在系统性开展轻量化工作的流程和方法上依然在摸索中前进.本文通过研究国内外轻量化开展现状,初步搭建了整车轻量化开展流程,制定出一套完整的重量管控流程,尝试提出了整车轻量化新的评价方法,努力推动建立一套规范的、切实可行的轻量化工作流程体系,以促进汽车主机厂降重节能减排的顺利实施以及轻...     

高速铁路CTC中心电源系统冗余方案探讨

介绍了一种高速铁路CTC中心电源系统冗余方案,并详细阐述了机房稳定电源提供、电源屏及UPS、双电源设备、单电源设备、电源监测系统、电源系统检修的具体方案。     

UPS电源放电远程报警装置设计

分析UPS电源在现场使用中存在的问题,指出造成UPS电源自放电的原因及其后果,介绍UPS电源放电远程报警装置的设计特点、工作原理和作用。     

适用于我国Ⅲ、Ⅳ级铁路的列控系统

我国Ⅲ、Ⅳ级铁路有配备列控系统的需求.ITCS和ERTMS Regional是适合Ⅲ、Ⅳ级铁路的2种列控系统,介绍了它们的结构和功能特点.     

构建科学的员工绩效管理体系探讨

文章针对当前国有企业绩效管理中常见问题,分析存在问题的原因,并结合企业绩效管理实践,提出建立和改善绩效管理体系的对策和建议。     

Modeling the Car-Truck Interaction in a System-Optimal Dynamic Traffic Assignment Model

Several transportation problems, such as implementation of truck-only lanes, require understanding the interaction of heterogeneous dynamic traffic flows in order to provide accurate solutions. System-optimal dynamic traffic assignment can be modeled using a network loading procedure based on the cell transmission model, that is, the hydrodynamic wave model, and solved by linear programming. However, this framework cannot handle the asymmetric integration between the flow of trucks and cars. This article presents a novel formulation for network loading in system-optimal dynamic traffic assignment considering car–truck interactions. By using an embedded cell transmission model, this formulation incorporates a set of assumptions related to the kinematic characteristics of the flow of cars, trucks, and their interactions that can be solved using linear programming. We present numerical results supporting our modeling assumptions. Likewise, the observed emergent behavior captures the car–truck interactions accurately and indicates that minimum system-optimal travel time is obtained by encouraging cars to use highways with shorter distances.