利用残余力概念进行结构损伤识别

提出一种利用残余力进行结构损伤识别方法。用刚度损伤系数将有限元模型参数化来描述结构的损伤。用特征值和特征向量预测算法构造目标函数,利用两点交叉算子的二进制代码的遗传算法反复迭代优化刚度损伤系数,获得待测结构的损伤系数、损伤位置与损伤程度的信息。通过一个平面桁架对该方法进行验证,结果表明:利用残余力概念进行损伤识别所得结构的损伤系数与理论值很接近。该方法能够较准确地判断结构的损伤位置和损伤程度。     

"友谊号"FPSO生产工艺流程改造

“友谊号”FPSO经过升级改造变成一艘具有原油开发综合处理功能的中心平台。文章分别介绍了该FPSO改装后的原油处理系统、污水处理系统、伴生气和天然气处理系统的工艺流程。     

亚临界淬火对LZ50钢车轴性能的影响

对LZ50钢车轴亚临界淬火前后的力学性能、晶粒度以及车轴表面残余应力的变化进行了试验,分析了亚临界淬火对LZ50钢车轴拉伸性能和表面质量的影响。试验表明,亚临界淬火对车轴拉伸性能无明显影响,然而车轴表面的残余应力变化很大,可由拉应力改变为压应力,而且通过优化加工工艺,表面压应力的增幅会更大,说明亚临界淬火能有效提高车轴的疲劳寿命。     

车辆动力传动系固有特性灵敏度分析及动力学修改

分析了车辆动力传动系无阻尼自由振动固有特性的灵敏度，特别给出了固有频率和振型对轴系刚度及惯量等物理参数的灵敏度。基于固有特性灵敏度分析，给出了动力学修改的计算方法。并以某重型车辆动力传动系为实例计算并分析了其固有频率和振型的灵敏度问题，在此基础上进行了动力学修改。     

沥青混凝土搅拌机燃用重渣油的尝试

为降低沥青混凝土搅拌机的生产成本,采用ZZR重渣油燃烧机替代柴油燃烧机取得了很好的经济效益,给出了燃渣油时渣油含水及油路阻塞的判断方法,并介绍了出现故障的排除方法.     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

基于钢管砼拱桥病害试验探讨其主拱强度计算公式的修正

鉴于西南某钢管砼拱桥存在较严重的安全隐患而拆除,对该桥的拱圈核心砼进行取样、试验研究,分析其强度分布规律.根据试验资料,讨论钢管砼拱桥应用现有的钢管砼构件理论进行计算时,其计算公式的修正.