高速公路雾区监控系统功能设计初探

高速公路雾区的交通安全是一个世界性的问题,每年由雾引发的交通事故导致的经济损失是十分巨大的。因此,提高高速公路在雾天低能见度条件下的交通安全水平,保证运输的畅通、安全具有极其重要的经济和社会效益,其中一个重要的方面就是高速公路的监控系统。针对雾对高速公路交通安全的影响机理,分析驾驶员的服务需求,对雾区高速公路监控系统的功能设计进行了初步探讨。     

Evaluating the effects of green port policy: Case study of Kaohsiung harbor in Taiwan

The paper evaluates the effectiveness of strategies designed to reduce these pollutants in port areas, based on a newly developed assessment model to calculate emissions. The case study found that the strategy of reducing the ship’s speed to 12 knots is most effective in cutting fuel consumption and costs, as well as emissions. Adopting an onshore power supply system could reduce CO₂ emission by 57.16% and PM by 39.4%. By adopting the strategies of both reduced speed and cold ironing emissions control, a reduction in emissions of 71% to 91% can be achieved with a 20 nautical mile reduced speed zone. Therefore, the goals of reductions in emissions to improve port areas air quality could be achieved through adopting a green port policy in the future.     

水上抛石施工工艺在潮间带区域的应用

以通州湾腰沙围垦一期通道工程B标抛石组织实施为例,通过开展规划临时航线、设置临时倒驳点、制定倒驳与抛设方案等一系列探索和研究,形成了针对浅海潮间带区域安全有效地组织水上抛石施工的专项技术方案,并描述了施工中应关注和优化的事项。     

机场净空区范围确定方法

为了解决城乡建设和机场净空保护之间的矛盾,分析了气象条件、导航设备、起落航线和飞行技术对机场净空区范围的影响.应用飞行航线理论知识,综合考虑各种影响因素,对机场净空区的组成和范围进行了修改:增加升降带的规定,修改端净空区扩散率为15%,端净空区宽度由2 km增大为3 km,将二与三、四级机场的净空区范围分别减小到50%和60%.结果表明现行的机场净空规定既能保证飞行安全,又为城乡建设发展提供了更大的空间,是可行的.     

多年冻土区路基主动降温措施浅议

针对多年冻土区的特殊气候环境,通过大量的调查研究,对目前所采用的多年冻土区路基的主要主动降温措施进行了总结与分析,对存在的问题进行了探讨,为施工与设计提供参考。     

张集铁路旧堡隧道断层破碎带初期支护大变形原因分析及治理措施

旧堡隧道穿越太古代变质岩系,构造发育、岩体破碎,地质条件极差。隧道于DK28+380~DK29+630段穿过断层及其影响带,施工过程中多次发生溜渣突泥突水塌方并引起初支大变形,严重影响施工安全及工程进度。结合该段地质条件,从围岩岩性特点、岩体结构特征、多期构造运动叠加及地下水共同作用等几个方面,探讨该隧道大变形的原因和机制,并阐述了后期施工中采取的加强结构支护、注浆加固、增设临挡护墙等处理对策,对类似工程地质条件地区隧道施工支护有一定的借鉴意义。     

长春地铁热环境与热舒适实测分析

采用热环境实测和热舒适调查问卷相结合的研究方法,研究长春地铁1号线冬季、过渡季、夏季车站及车厢的热环境和热舒适情况,分析得出长春室外、车站及车厢2017—2018年温度的变化区间及规律、结果显示,华庆路站站厅、站台温度值不满足规范要求,冷风渗入是影响冬季出入口温度的重要因素,并分析出车站及车厢80%满意率舒适区以及不同季节的热中性温度,旨在为严寒地区地铁热环境及热舒适研究奠定研究基础,为地铁环控系统的设计提供参考。     

防止电力机车进入无电单元(区)的安全预警方法

针对目前计划内接触网停电时电力机车进入无电单元(区)的问题,提出了基于动态停电作业区域数据对比库语音、屏幕鼠标点击坐标和高清成像分析进行"三元素二阶段"处理对比方法,以减少人员操作失误和损失.机车/车次信息及对应机车属性先由操作人员办理接发列预告(办理闭塞)的语音识别获取,再通过TDCS/CTC终端机非上位机获取并核对...     

Seasonal and interannual variation of physical and biological processes during 1994–2001 in the Sea of Japan/East Sea: A three-dimensional physical–biogeochemical modeling study

A Pacific basin-wide physical–biogeochemical model has been used to investigate the seasonal and interannual variation of physical and biological fields with analyses focusing on the Sea of Japan/East Sea (JES). The physical model is based on the Regional Ocean Model System (ROMS), and the biogeochemical model is based on the Carbon, Si(OH)₄, Nitrogen Ecosystem (CoSiNE) model. The coupled ROMS–CoSiNE model is forced with the daily air–sea fluxes derived from the National Centers for Environmental Prediction (NCEP) and the National Center for Atmospheric Research (NCAR) reanalysis for the period of 1994 to 2001, and the model results are used to evaluate climate impact on nutrient transport in Mixed Layer Depth (MLD) and phytoplankton spring bloom dynamics in the JES.The model reproduces several key features of sea surface temperature (SST) and surface currents, which are consistent with the previous modeling and observational results in the JES. The calculated volume transports through the three major straits show that the Korea Strait (KS) dominates the inflow to the JES with 2.46 Sv annually, and the Tsugaru Strait (TS) and the Soya Strait (SS) are major outflows with 1.85 Sv and 0.64 Sv, respectively. Domain-averaged phytoplankton biomass in the JES reaches its spring peak 1.8 mmol N m^− 3 in May and shows a relatively weak autumn increase in November. Strong summer stratification and intense consumption of nitrate by phytoplankton during the spring result in very low nitrate concentration at the upper layer, which limits phytoplankton growth in the JES during the summer. On the other hand, the higher grazer abundance likely contributes to the strong suppression of phytoplankton biomass after the spring bloom in the JES. The model results show strong interannual variability of SST, nutrients, and phytoplankton biomass with sudden changes in 1998, which correspond to large-scale changes of the Pacific Decadal Oscillation (PDO). Regional comparisons of interannual variations in springtime were made for the southern and northern JES. Variations of nutrients and phytoplankton biomass related to the PDO warm/cold phase changes were detected in both the southern and northern JES, and there were regional differences with respect to the mechanisms and timing. During the warm PDO, the nutrients integrated in the MLD increased in the south and decreased in the north in winter. Conversely, during the cold PDO, the nutrients integrated in the MLD decreased in the south and increased in the north. Wind divergence/convergence likely drives the differences in the southern and northern regions when northerly and northwesterly monsoon dominates in winter in the JES. Subjected to the nutrient change, the growth of phytoplankton biomass appears to be limited neither by nutrient nor by light consistently both in the southern and northern regions. Namely, the JES is at the transition zone of the lower trophic-level ecosystem between light-limited and nutrient-limited zones.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.