HX_D1型机车制动空气管路冲脱分析及改进方案

根据橡胶密封式管接头的作用原理和使用要求,对HXD1型机车制动空气管路冲脱故障产生的原因进行分析。从结构上对橡胶密封式管接头进行改进,并提出采用卡套式管接头代替橡胶密封式管接头的建议。     

基于系统规划的公路桥收费策略

在我国有公路桥的城市很多,为此制定相应的基于系统最优的公路桥收费策略,不仅可以方便居民的正常出行,还有助于政府利用桥梁收费达到城市交通平衡和解决市政桥梁建设资金问题的双重目的。     

GSC旋转剪切压实机的研制

近年来美国的GTM试验机已广泛应用于我国道路路面的设计当中。依据GIM试验机的测试原理研制的新一代旋转、剪切、压实机（GSC试验机）已通过技术鉴定并交付用户使用。因此,对GSC试验机的研发过程、设计思想、主机结构和测控原理加以详述,并对其技术创新对提高整机性能的影响进行一定的评价,育助于填补国内该项技术的空白。     

新型负阶跃动态扭矩校准装置

针对扭矩传感器静态校准无法完全满足实际需要的难题,设计一种新型100 N·m负阶跃动态扭矩校准装置,并阐述该装置的工作原理和关键技术。校准装置由扭矩产生装置、连接系统、制动系统、信号处理控制系统和空气轴承系统组成,利用火工拔销器产生负阶跃动态扭矩,较大程度上降低负阶跃动态扭矩的下降时间,并采用空气轴承的支承方式提高动态扭矩的传递精度。通过对试验数据进行分析和处理,结果表明该装置负阶跃扭矩产生时间低于0.1 ms。不确定度分析结果显示,该装置的扩展不确定度U为4.22%,扩展因子k为2。     

大型绞吸船吹填在袋装砂围堤施工中的应用

针对袋装砂围堤施工存在砂源紧张、砂源较远、土质情况不适合袋装砂围堤就地取砂施工问题,依托文莱PMB石油化工项目进行绞吸船结合袋装砂围堤施工研究,采用大型绞吸船吹填提供砂源进行袋装砂围堤施工,探索袋装砂围堤施工新技术的应用以及施工效率、质量、成本的控制。     

钢板桩常规施工工艺及涂层受损问题

针对钢板桩施工问题,以马来西亚槟城吹填二期(STP2)工程为例,对Z型钢板沉桩机具选型及沉桩工艺进行研究。通过对比3种国外常用的钢板桩沉桩阻力估算方法及含导向架和无导向架施工的实际应用效果,优选出适合沉桩的振动锤型,并总结出两种沉桩方法的优劣性及适用情况,总结陆上钢板桩作业涂层常见受损问题及修复措施。     

不同间隙比竖井内水流与平衡重二维流固耦合

目前,水力式升船机在国内外尚无投入实际运行,无实际设计、安装、运行经验可循。建立不同间隙比竖井与平衡重之间二维流固耦合数学模型,在非恒定流作用下,对不同间隙比时平衡重上升过程的水动力响应进行动态模拟。得出有利于该类升船机稳定运行的最优间隙比。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.