Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

公路生态系统服务功能分析及评估

文章探讨了公路生态系统的生态服务功能,提出价值评估指标体系及定量评估方法,为公路生态系统的恢复或重建提供理论依据,对全面、正确评价公路生态系统有积极意义。     

厦门地铁2号线钻探工程海上通航安全评估

依据港口通航现状、港口发展规划、附近海域船舶交通现况,分析通航安全形势,预测厦门轨道交通2号线跨海路段施工期间,船舶交通流可能的变化和通航环境、通航秩序的适应能力,论证在施工期间存在的通航安全风险、主要问题及通航安全保障能力,并提出保障通航安全的可行性建议和措施.     

基于名义应力法的动车组车体净水箱吊装部件疲劳强度分析

针对高速运行动车组车体悬挂设备振动疲劳损伤问题,以某型动车组车顶净水箱吊装结构为研究对象,采用名义应力法对吊装结构的焊缝部位进行疲劳强度评估.根据EN 12663标准确定净水箱的工作载荷工况,采用有限元法计算了各工况下结构的振动响应,并基于BS标准计算了焊缝疲劳评估点的寿命.假定各载荷工况出现频率相同的情况下,构造了工作载荷历程,采用Fe-safe软件对焊缝的疲劳寿命进行了仿真分析.两种方法分析结果均表明:焊缝1与焊缝2寿命最低,是结构最易发生疲劳破坏的位置;焊缝位于筋板表面的焊趾寿命低于位于主支撑板表面的焊趾寿命.     

浮冰冲击作用下的乙烯运输船体 舷侧结构强度分析

对无限航区的21000m3乙烯运输船舷侧结构,分别采用纵骨架式和横骨架式冰区加强设计。根据FSICR规范要求,更新舷侧冰带区域内构件尺寸,并针对艏部冰带区域内船体结构,分别建立了原始的、纵骨架式的和横骨架式的冰带结构设计有限元模型。通过强度计算,认为艏部冰带区新结构满足规范设计载荷要求。在此基础上,单独建立艏货舱冰区舷侧外板板架有限元模型,研究两种新设计形式适用的外板在更大浮冰冲击载荷作用下塑性变形。计算结果表明:纵骨架式结构外板塑性变形明显低于横骨架式。     

基于裂纹扩展理论的船体结构疲劳评估

疲劳破坏是船舶结构的主要破坏形式之一。为了保证船舶结构有足够的疲劳强度,各国船级社、船厂等均建立了船舶结构疲劳强度校核规范作为船舶疲劳评估的指导性文件,尽管这些规范均是建立在S-N曲线方法基础上的,但由于S-N曲线方法存在自身无法克服的缺陷(如忽略材料的初始缺陷等),对同一节点进行计算得到的疲劳寿命大相径庭。该文作者在基于裂纹扩展理论的基础之上,给出了一套详细的船体结构疲劳评估方法,并应用此方法对大型船舶结构典型节点的疲劳寿命进行评估,以期能为完善船舶结构疲劳寿命的评估提供参考。     

Experimental Investigation of the Effect of Bow Profiles on Resistance of an Underwater Vehicle in Free Surface Motion

In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion ...     

含缺陷压力管道安全评定方法研究的现状与发展

含缺陷压力管道安全评定的方法较多,主要有极限载荷控制的塑性失效准则、断裂力学J积分的评定方法、英国R6双判据准则评定方法、美国ASME规范评定方法、参数不确定性缺陷的安全评定方法等.文章对这些方法加以简要的概括和评述,并分析了有些方法之间的区别与联系,同时指出工程化、可靠性和智能化是当前含缺陷压力管道安全评定方法的发展趋向.     

形成性评价在大学英语实践中反映的问题

形成性评价是学习测量和评价的重要组成部分.通过对其在本校大学英语教学与测试中的效果进行抽样调查研究,分析其在实践当中出现的问题,提出改进办法,以便更好的发挥其在大学英语教学与测试中的反馈和指导作用.