露石水泥混凝土路面关键技术研究

研究了露石水泥混凝土路面铺筑过程中必然要遇到的材料选择、冲洗时间、成熟度、双层铺筑混凝土强度等关键技术问题,分析了冲洗时间、成熟度的主要影响因素,发现温度越高,冲洗时间越早,最早冲洗时间与最迟冲洗时间有较大的间隔,常温下可达十多个小时,温度升高,间隔减小,成熟度随温度的升高而增大,相隔一定时间分两层振捣的水泥混凝土试件强度与一次振捣的水泥混凝土试件强度基本相同。结果表明:成熟度指标、试验法是评价、检测露石工艺性质的有效手段,两层铺筑方法是降低此种路面成本的有效途径。     

汽车轮胎结构非线性有限元分析

本文综述了轮胎力学的发展历史与现状，阐明了轮胎结构分析的几各主要方法、研究内容及其优缺点，并重点介绍了在子午三维非线性有限元结构分析方面的工作，包括轮胎的充气，竖直加载、稳态滚动、滚动阻力及温度场分析，给出了相应的算例。由于采用一些新的方法和技术，考虑了更真实的轮胎材料模型，结构和载荷，使得分析更为有效、精确，分析结果可作为轮胎的设计，试验与改进的依据。     

南京长江二桥斜拉桥施工过程稳定性分析

针对南京二桥南汊钢斜拉桥,考虑结构的非线性和构件的极限承载能力,计入施工过程的变形和应力的叠加效应,用包含梁和索单元的空间组合结构模型,进行了大桥的结构行为分析,着重研究了在施工全过程中的结构稳定性问题。     

大神高速公路穿越矿区选线思路

结合山西省大营至神池高速公路设计经验,对矿区公路的特点进行了总结归纳,并以实际工程为例,提出了选线设计的总体原则和主要思路,供设计人员参考。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Data dependent input control for origin–destination demand estimation using observability analysis

In this paper, we address the observability issue of static O–D estimation based on link counts. Unlike most classic observability analyses that relied only on network topological relationships, our analysis incorporates the actual values of input parameters, thus including network operational relations as well. We first analyze possible mathematical properties of an O–D estimation problem with different data input. We then propose a modeling approach based on mixed-integer program for selecting model input that ensures observability and estimation quality. Through establishing a stronger connection between observability analysis and the corresponding estimation problem, the proposed method aims to improve estimation quality while reducing reliance on erroneous data.     

海洋平台海洋平台常用流量计的选型分析

文章主要介绍了海洋平台常用流量计的原理和特点,结合海洋平台的特点叙述了流量计选型时的注意事项,并给出了海洋平台常用流量计的选型原则和计算方法,为海洋平台选出最合适的流量计提供了一种方案。     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

汕头苏埃隧道方案设计关键技术研究

根据汕头苏埃隧道的建设条件,对工程方案设计中的几个技术难点进行研究,并提出解决方案。通过采用"多级分流"理念,实现隧道与北岸4条城市主干道的交通衔接;选择"抛石+排水板"方案解决海域深厚淤泥地层中的围堰设计;8度高烈度震区选择合理的抗震减震措施解决隧道结构抗震;采取双道密封垫和加大密封垫断面的防水设计,满足地震时管片接缝张开量大的防水要求;针对复杂地层,对盾构选型和配置提出建议;对海底凸起进入隧道内的硬岩进行爆破预处理,以降低盾构施工风险。