栏杆基石对闭口箱梁桥梁涡振性能影响的机理

为研究检修道栏杆基石对桥梁涡激振动性能的影响,依托中国某主跨808 m的超大跨度闭口箱梁加劲梁悬索桥,通过主梁大比例节段模型弹性悬挂测振测压风洞试验获取模型风致振动响应和表面各测点压力时程数据,测试原设计断面在±5°攻角范围内的涡振性能,对比分析3种不同栏杆基石位置和高度工况下主梁涡振响应性能和桥面测点脉动压力系数均值、均方差、压力功率谱以及局部气动力和总体气动力的相关性。研究结果表明：依托工程主梁设计断面发生了显著的竖向和扭转涡激共振,且扭转涡振显著超出规范允许值,主梁涡振性能随来流风攻角的增大而变差。主梁表面实测脉动压力数据分析显示,由于栏杆和基石的阻挡,箱梁上表面气流分离后在后部再附,导致上表面前部和中后部发生了强烈的压力脉动。上表面前部、后部以及下表面迎风区斜腹板局部气动力与总体气动力具有很强的相关性,这也是导致主梁发生显著扭转涡振的根本原因。将栏杆基石移至桥面板边沿显著减小了上、下表面压力脉动,上表面前部和后部气动力相关性被破坏,可以大幅抑制涡振;将栏杆基石移至桥面板边沿,并降低栏杆基石高度抑制了气流在上表面后部的再附现象,断面压力脉动被削弱,局部气动力和总体气动力相关性被完全破坏,从而有效抑制涡振。     

新建隧道爆破施工振动影响研究

文章以新建库鲁塔格隧道爆破施工为例,通过进行爆破振动测试,分析爆破施工过程中既有隧道的爆破振动速度与微应变之间的相互关系,研究新建隧道爆破施工对临近既有隧道的影响。     

基于Midas Civil的简易车桥耦合振动分析

文章以某40m预应力混凝土简支T梁为例,利用单轴车桥耦合振动数值模型及基于MidasCivil的简易车桥耦合振动模型对移动车辆荷载作用下的T梁结构动力响应情况进行计算分析。结果表明,基于MidasCivil的简易车桥耦合振动模型与数值模型的结构挠度峰值计算结果相差不大,可用于简单的车桥耦合振动分析。     

隧道爆破信号主分量特征提取与毫秒延期识别研究

为了准确揭示隧道爆破振动信号所包含的反映爆破特征参数的重要信息,通过EMD分解与交叉小波变换组合分析方法对实测爆破信号进行分析,得到各分量与原信号的相关性系数,从而准确判别出信号的主分量。再依据相关性系数对包含主分量在内的相关分量重组并进行Hilbert变换取模值,精确识别出隧道采用的各段别雷管的毫秒延期时间。结果表明： 组合方法确定的主分量及相关分量重组信号能够突出爆破信号的主要特征,对隧道爆破信号的分析效果好。     

适于TBM施工的HSP法实时预报技术设计与实现

为实现TBM施工隧道的实时地质预报,以TBM刀盘滚刀破岩震动作为震源的HSP法地质预报技术为基础,通过分析TBM施工工艺与机身结构特点,对HSP系统硬件和软件进行优化设计,使其小型化、自动化和智能化,并搭载于TBM上进行智能控制。在TBM掘进过程中,首先,通过隧道轮廓位置的检波器连续或高频次地采集地震反射波信号; 然后,经系统软件对数据的自动处理,实时获取掌子面前方地层反射特征参数图谱; 其次,通过智能识别技术完成对不良地质反射界面的有效拾取与判识; 最后,实现不良地质的探测。通过对适于TBM施工的HSP法实时预报技术进行优化设计,实时探查前方地层不良地质(体)位置、规模与性质,为TBM的高效施工起到一定的推助作用。     

气动弹簧在绞吸挖泥船低频振动控制中的应用

针对绞吸挖泥船铰刀旋转切削岩石时产生的低频振动问题,基于气动弹簧的结构形式、受力分析及固有频率低的特点,研究气动弹簧在绞吸挖泥船上的应用方案,并利用船体和生活楼的位移反馈信号控制气动弹簧减振系统的工作状态,同时还介绍了船舶设计过程中需注意的问题。     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

高速船尾部喷水推进局部振动分析

针对高速船尾部采用喷水推进装置的局部振动问题,建立了船体尾部包含喷水推进泵的有限元模型。考虑附连水质量的影响,将船体尾部离散成甲板,底板,喷水推进泵,尾板等局部结构,采用规范经验公式估算以及有限元分析的方法分别对各局部结构的板、板格、板架进行固有频率计算,将其结果与轴频和叶频激励频率进行储备频率校核,判断尾部采用喷水推进装置在振动问题上是否满足规范标准,并为下一步的船体设计提供参考。     

燃机动力学建模中复杂结构处理方法研究

提出了三种以动力学相似为基础的转子动力学建模关键技术,并以某型燃气轮机建模为例,对该关键技术进行了验证。利用三种方法,对该燃气轮机的动力学特性进行研究,并与整机试验结果进行了对比。结果表明,动力学分析的准确程度主要由模型决定,本文所提出的三种建模关键技术能够反映结构的真实特性,可用于具有类似结构的双转子系统。