轨道车辆三电平中点自平衡电路拓扑研究

在有轨电车超级电容供电系统中,作为充电装置的三电平直流变换器中储能电容存在有均压以及中点平衡问题,中点不平衡将导致装置的工作异常,严重的将引起直流变换器的损坏。对此,传统方法一般是通过电路拓扑结构及控制策略调节电力电子器件开关管占空比来解决。通过分析传统充电装置中三电平中点电位不平衡的原因,针对超级电容型轨道车辆充电系统中三电平直流变换器中点偏移问题,提出一种新的三电平直流变换电路拓扑,通过斜对称电容构建三电平充电电路,不仅具有传统三电平直流变换拓扑降低开关管应力、改善系统的动态性能的优点,还可以在不依靠控制算法的基础上实现一定的三电平直流变换器均压电容中点电位的自平衡校正能力。针对该电路拓扑,详细阐述优化拓扑电路的工作原理和其中点自平衡特点,同时给出电路中相关开关器件及滤波电感及均压支撑电容计算过程。通过Matlab/Simulink仿真软件分析及搭建实物平台,验证优化拓扑结构不仅兼具传统三电平直流变换器拓扑降低开关管应力,改善系统动态性能的优点,更有充电速率快,安全性能高的特点,还能不依靠控制算法实现中点电位自平衡。     

液压式盾构/TBM主机平移-空推集成装置的研制

研究目的:目前,隧道掘进机平移与空推工艺多采用不同装置分步完成,装置安装耗时费力,严重影响项目施工进程,且国内外没有可同时解决掘进机主机平移和空推的工法或装置.本文研制了一种基于液压的盾构/TBM主机平移-空推集成装置,将平移与空推工序合一,可极大提高工程施工效率,实现荷载600 t盾构/TBM主机连续移位. 研究结论...     

Dynamic demand estimation and prediction for traffic urban networks adopting new data sources

Nowadays, new mobility information can be derived from advanced traffic surveillance systems that collect updated traffic measurements, both in fixed locations and over specific corridors or paths. Such recent technological developments point to challenging and promising opportunities that academics and practitioners have only partially explored so far.The paper looks at some of these opportunities within the Dynamic Demand Estimation problem (DDEP). At first, data heterogeneity, accounting for different sets of data providing a wide spatial coverage, has been investigated for the benefit of off-line demand estimation. In an attempt to mimic the current urban networks monitoring, examples of complex real case applications are being reported where route travel times and route choice probabilities from probe vehicles are exploited together with common link traffic measurements.Subsequently, on-line detection of non-recurrent conditions is being recorded, adopting a sequential approach based on an extension of the Kalman Filter theory called Local Ensemble Transformed Kalman Filter (LETKF).Both the off-line and the on-line investigations adopt a simulation approach capable of capturing the highly nonlinear dependence between the travel demand and the traffic measurements through the use of dynamic traffic assignment models. Consequently, the possibility of using collected traffic information is enhanced, thus overcoming most of the limitations of current DDEP approaches found in the literature.     

Dynamic activity-travel assignment in multi-state supernetworks

The integration of activity-based modeling and dynamic traffic assignment for travel demand analysis has recently attracted ever-increasing attention. However, related studies have limitations either on the integration structure or the number of choice facets being captured. This paper proposes a formulation of dynamic activity-travel assignment (DATA) in the framework of multi-state supernetworks, in which any path through a personalized supernetwork represents a particular activity-travel pattern (ATP) at a high level of spatial and temporal detail. DATA is formulated as a discrete-time dynamic user equilibrium (DUE) problem, which is reformulated as an equivalent variational inequality (VI) problem. A generalized dynamic link disutility function is established with the accommodation of different characteristics of the links in the supernetworks. Flow constraints and non-uniqueness of equilibria are also investigated. In the proposed formulation, the choices of departure time, route, mode, activity sequence, activity and parking location are all unified into one time-dependent ATP choice. As a result, the interdependences among all these choice facets can be readily captured. A solution algorithm based on the route-swapping mechanism is adopted to find the user equilibrium. A numerical example with simulated scenarios is provided to demonstrate the advantages of the proposed approach.     

时速160km以下双层集装箱运输铁路有砟轨道隧道内轮廓研究

目前运营时速160 km以下(双箱运输)有砟轨道隧道内轮廓难以满足大型养护机械(特别是大型清筛机)作业空间需求,通过对新建时速160 km以下电气化铁路(双箱运输)有砟轨道隧道的建筑限界、接触网悬挂方式及布置、大型养护机械空间需求、轨道结构形式、侧沟及电缆槽设置等内轮廓影响因素进行综合分析,确定单双线铁路有砟轨道隧道内轮廓控制性尺寸、拟定内轮廓方案,通过对各型内轮廓方案的结构安全性、经济性及施工便利性比较,给出推荐方案,为通用图编制和纳入规范奠定基础。     

基于ASP.NET的B/S架构的软件在Windows7系统下的部署

本文重点研究了对于B/S架构的软件在Windows7系统下部署时应该采用的一系列方法及在部署时遇到的一系列问题的解决方案。文中分析了利用ASP.NET开发的B/S架构的软件的优点并在此基础上介绍了软件部署的流程。本文在分析过程中结合具体实例提出了部署中一些常见问题的解决方案。     

姜黄素促进RAW264.7源性M1巨噬细胞向替代激活M2表型极化

目的观察姜黄素对LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)极化的影响及机制。方法不同浓度姜黄素(6.25、12.5、25μmol/L)干预LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)12h,同时再加入20μmol/L GW9662与25μmol/L姜黄素共同干预LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)12h,采用Real-time PCR、ELISA及Western blot方法检测IL-1β、IL-6和M2表型标志分子KLF4、FIZZ1、MGL1、PPARγ的表达,及阻断PPARγ后KLF4和FIZZ1的表达。结果不同浓度姜黄素均能上调LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)的M2标志分子的表达,并且抑制炎症因子IL-1β和IL-6的分泌;阻断PPARγ后,RAW264.7巨噬细胞源性M1表型巨噬细胞表达M2标志分子下调。结论姜黄素通过活化PPARγ促进LPS和IFNγ诱导的RAW264.7巨噬细胞(M1)向M2表型极化。     

吸烟和β3-肾上腺素能受体基因Trp64Arg、锰超氧化物歧化酶9Ala/Val基因多态性与非酒精性脂肪性肝病的相关性

目的探讨吸烟和β3-肾上腺素能受体(β3-AR))基因Trp64Arg、锰超氧化物歧化酶9Ala/Val(MnSOD9Ala/Val)基因多态性与非酒精性脂肪性肝病(NAFLD)发病之间的关系。方法采用病例-对照研究的方法,以720例NAFLD患者及720例健康对照者的外周血白细胞为样本,采用聚合酶链反应(PCR)技术分析β3-AR基因Trp64Arg和MnSOD9Ala/Val基因多态性。结果β3-AR基因Trp64Arg(A/A)基因型和MnSOD9Ala/Val(V/V)基因型频率分布分别为39.4%、71.7%(病例组)和21.1%、43.3%(对照组),差异有统计学意义(P<0.01;P<0.01)。Trp64Arg(A/A)基因型者患NAFLD的风险显著增加(OR=2.434,95%CI=1.816~4.075)。MnSOD9Ala/Val(V/V)基因型者患NAFLD的风险也显著增加(OR=3.308,95%CI=1.913~4.509)。基因突变的协同分析发现,Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型者在NAFLD组和对照组中的分布频率分别为32.8%和6.5%,差异有统计学意义(P<0.01)。Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型者患NAFLD的风险显著增加(OR=9.753,95%CI=4.292~12.426)。病例组的吸烟率显著高于对照组(OR=2.623,95%CI=1.425~4.957),Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型与吸烟有协同作用(OR=33.764,95%CI=18.907~61.582)。结论 Trp64Arg(A/A)/MnSOD9Ala/Val(V/V)基因型和吸烟是NAFLD的易患因素,三者的联合在NAFLD的发生中起着协同的作用。     

船舶甲板分段纵骨焊接变形和残余应力数值模拟

基于非线性分析软件Abaqus,采用顺序耦合的热弹塑性有限元方法研究典型船舶甲板分段纵骨焊接的变形与残余应力问题。焊接过程中的温度场分析采用具有截面积分shell单元的shell/solid模型,移动热源为高斯分布与均匀体组合热源,材料考虑应变随温度变化的特性。通过与T型接头焊接实验结果对比,验证了方法的可靠性。在此基础上,计算分析了甲板分段纵骨焊接的整体变形和局部板格变形,并讨论了外板纵向和横向焊接残余应力分布规律。     

城市客车内饰风道设计简述

城市客车内饰风道设计的好坏对车辆的运行性能似乎没有什么影响,往往容易被忽视。风道不仅影响到内饰的美观而且对空调客车内室的保温、减少空调系统的损失,提高运行经济性起到至关重要的作用。这里对城市客车风道的结构设计、材料应用及其隔热措施保温提出了自己的见解,并着重叙述了风道的保温。