桩群绕流阻力物理模型试验测量技术研究

由于压强差的存在和桩群表面的摩擦力,水流流过桩群时将产生绕流阻力。对于单根桩的复杂水流条件下绕流阻力的理论分析尚待进一步研究,桩群的阻力计算更显复杂,限于理论计算桩群绕流阻力的复杂程度,桩群水流阻力数值模拟和物理模拟技术仍处在概化模拟阶段。为了通过实测数据辅助研究桩群阻力概化方法,依托物理模型技术、传感器发展水平、软硬件系统集成技术而提出一整套对桩群阻力测量技术的解决方案,并分析了测量结果的合理性。     

重庆朝天门长江大桥施工扣索索力监控分析

重庆朝天门长江大桥主跨桁拱施工采用拱上爬行吊机悬臂吊装法,期间辅助以大型斜拉扣挂系统。通过建立空间有限元模型．对其施工过程进行理论分析。从理论分析、实测数据、实际施工操作三方面综合分析了朝天门长江大桥扣索初张力的控制．并对施工中各个工况下的索力实测数据进行了分析。     

Quasisteady theory for the hydrodynamic forces on a circular cylinder undergoing vortex-induced vibration

Vortex-induced vibrations of a rigid circular cylinder were studied by constructing a theory based on a wake oscillator model under quasisteady approximations, thereby evaluating vortex-induced hydrodynamic forces acting on the cylinder. A lock-in limit line representing the boundary for the occurrence of frequency lock-in was also theoretically derived. Hydrodynamic forces in forced oscillation problems estimated by the theory were compared with measured ones. Although some discrepancies were found, particularly in cases with high-frequency oscillations, good agreement was achieved in most cases. Accordingly, we conclude that the present theory captures well real phenomena in the wake downstream of a cylinder subjected to a flow.     

船模伴流场修正对螺旋桨激振力预报的影响

介绍Hoekstra船模伴流修正方法、伴流模拟方法及螺旋桨激振力测量的试验过程。以第16届ITTC推荐的Sydney Express桨为研究对象,在上海船舶运输科学研究所空泡实验室用网格方法模拟船舶艉部流场,通过布置在桨模上方相应位置平板上的5个传感器进行了脉动压力测量。比较螺旋桨在船模伴流场和使用Hoekstra法换算得到的实船伴流场中工作时激振力的预报值及桨模空泡形态,并与实桨对比,就伴流场修正对螺旋桨激振力预报的影响作了探讨。     

桥墩盖梁的设计与计算分析

盖梁是桥梁结构中重要的受力部件,起着连接上下部结构的重要作用.盖梁设计需要通过上下部受力计算拟定盖梁尺寸并建立计算模型,进行内部受力分析.     

矮塔斜拉桥索鞍受力分析

以一座矮塔斜拉桥为研究对象,采用空间有限元方法计算了索鞍的受力情况,将索力比较真实地转化为抛物线形面压力施加在各个对应孔道上,并分析了孔道施工偏差对运营阶段塔的影响。     

薄壁墩墩顶拉力简化计算

针对薄壁墩、花瓶墩等结构,提出墩顶带拉杆的Y形墩模型,给出了墩顶拉力的简化计算公式。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

船闸闸室结构的船-墙碰撞三维有限元分析

以江苏某重力式船闸闸室结构为例,采用ABAQUS软件建立船舶-闸室结构-土体三维有限元模型,对船舶撞击闸室进行瞬态动力分析,得到不同工况下的撞击力时程曲线和撞击力值等结果。研究结果表明:船舶撞击闸室的法向平均撞击力大小与船舶排水量的12次方、撞击速度的1次方、撞击角度的1次方成线性关系;将软件模拟的船舶法向撞击力数值与依据JTJ 307—2001《船闸水工建筑物设计规范》得到的计算值比较,发现规范公式得到的数值普遍偏小,低估了过闸船舶撞击力的影响。     

MTMD to increase fatigue life for OWT jacket structures using Powell's method

The Powell's method was developed to determine the optimal stiffness and damping of multi-tuned mass dampers (MTMD) in offshore wind turbine (OWT) support structures under fatigue loads. Numerical examples indicated that the Powell's method results are always better than those using MTMD formulations. With the exception of the blade passing (3P) frequency, it was found in this work that a positive integer (n) multiple of the 3P frequency will also result in a large wind-induced vibration, which can be excited by the frequency of the first structural vertical rotation mode and will cause significant fatigue damage. The first translation mode TMD installed at the tower top is efficient to increase fatigue life at the tower and brace connections, but it cannot reduce fatigue damage at the column and brace connections below the platform. The second translation mode TMD can reduce fatigue damage resulting from large wave loads and thus increase the fatigue life of the braces and columns. The mode-3 TMD with a reduction in the 3(3P) vertical rotation can effectively increase the fatigue life of the braces and columns. Thus, the appropriate use of these TMDs can be effective for the fatigue problem of OWT support structures.