微表处耐磨性能影响因素试验研究

该文介绍了微表处耐磨性能影响因素试验研究。通过侵水1h湿轮磨耗试验,研究添加不同种类及剂量改性剂的乳化沥青、矿料级配、水泥掺加量等因素对微表处耐磨性能的影响。试验结果表明,在相同油石比的试验条件下:使用SBR胶乳改性乳化沥青的微表处耐磨性能优于使用SBS胶乳改性乳化沥青;随着改性剂剂量的增大,微表处耐磨性能逐渐变好,并趋于稳定;矿料中值级配微表处耐磨性能最好,级配上限与级配下限微表处耐磨性能基本相当;水泥掺加量对微表处耐磨性能有提高,也有降低。     

Tangential force variation due to the bogie direction reversal procedure

A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

Simulation of dynamic interaction between train and railway turnout

Dynamic train–track interaction is more complex in railway turnouts (switches and crossings) than that in ordinary tangent or curved tracks. Multiple contacts between wheel and rail are common, and severe impact loads with broad frequency contents are induced, when nominal wheel–rail contact conditions are disturbed because of the continuous variation in rail profiles and the discontinuities in the crossing panel. The absence of transition curves at the entry and exit of the turnout, and the cant deficiency, leads to large wheel–rail contact forces and passenger discomfort when the train is switching into the turnout track. Two alternative multibody system (MBS) models of dynamic interaction between train and a standard turnout design are developed. The first model is derived using a commercial MBS software. The second model is based on a multibody dynamics formulation, which may account for the structural flexibility of train and track components (based on finite element models and coordinate reduction methods). The variation in rail profile is accounted for by sampling the cross-section of each rail at several positions along the turnout. Contact between the back of the wheel flange and the check rail, when the wheelset is steered through the crossing, is considered. Good agreement in results from the two models is observed when the track model is taken as rigid.     

重载货车车轮踏面垂直磨耗原因分析及改进

分析总结了大秦线重载货车车轮磨耗的原因,并针对解决大秦线车轮非正常磨耗提出几点建议。     

Wear simulation for the centre plate arrangement of a freight car

The bodies of many railway freight cars in many countries of the world are coupled to the running gear by means of a body centre plate that makes a friction pair with a centre bowl. During motion, the bogie is rotated and moved with respect to the car body. This leads to wear on the contact surfaces. Lubrication is inexpedient in this case because the friction forces damp the vibrations (so-called bogie hunting) during motion. Usually, centre plates exhibit noticeable wear after two years of operation. Reducing wear requires knowing details of the wear process which, in turn, requires computer simulation of freight car motion for an operation period of 10–15 years. The purpose of this paper is to develop a universal method for wear simulation of friction pairs that could be used, in particular, for the centre plate of a freight car.     

重载铁路轮轨磨损原因探讨

根据轮轨接触理论，分析了不同轮轨接触几何匹配关系下的轮轨接触应力情况，指出轮轨接触应力、轮轨接触几何关系、轴重是影响重载铁路轮轨磨损的主要因素，从重载运输装备方面提出了减少轮轨磨损的几点建议。     

泥沙颗粒对UHMWPE材料水润滑性能的影响规律

为研究船舶水润滑尾轴承材料超高分子量聚乙烯（UHMWPE）在含沙水质下的摩擦学性能,利用 CBZ-1摩擦磨损试验机进行试验。结果表明：在水润滑条件下,泥沙对试验材料的摩擦学性能有很大的影响,并且泥沙浓度对材料摩擦性能的影响大于泥沙粒度;材料的摩擦性能随着泥沙浓度的增加逐渐下降;泥沙粒度影响着摩擦副间的切应力和沙粒进入摩擦副间隙的难易程度。在泥沙粒度48μm/浓度1.2%的环境下,材料具有更加恶劣的摩擦学性能。适当提高滑动速度会加强摩擦副的润滑性能,但过高的速度会使泥沙颗粒严重破坏磨损表面;材料的摩擦性能随载荷的增大而逐渐恶化,在高载工况下的磨损机制主要是磨粒磨损和黏着磨损。     

反渗透海水淡化用海水泵的研究与发展现状

海水淡化是人类解决淡水缺乏的必然途径,反渗透海水淡化适应性宽,无论大、中、小规模,还是海水或苦咸水都适用,是近20年发展最快的海水淡化技术,本文主要介绍反渗透海水淡化系统中的关键部件-海水泵的国内外研究、应用与发展现状,分析探讨了海水泵的关键技术问题.     

不同车轮踏面对高速轮轨关系的影响研究

根据中国高速铁路的现状,在轮对内侧距选用1353、轨底坡选用1:40、钢轨选用中国高速钢轨cHN60的前提下,研究了CRH2上使用的LMa、CRH3上使用的S1002G和日本新干线圆弧车轮JP-ARC这3种踏面对CHN60轮轨的影响.研究结果表明,LMa与CHN60的轮轨接触点分布比较均匀,有利于车轮型面的保持;其次是...