控制和管理一体化的DCS系统

阐述工业控制和管理一体化ＤＣＳ系统的重要性，介绍了一种网桥，将２＋控制网和ＮＯＶＥＬＬ网连网，并给出了具体的系统图和接口电路图。     

斜拉桥大型挂篮整体吊装施工技术

通过重庆奉节长江大桥及重庆云万高速公路彭溪河特大桥两座斜拉桥挂篮吊装施工的对比,主要介绍了利用简易水平吊架进行大型前支点挂篮高空整体吊装的施工技术。通过两座大桥挂篮整体吊装技术的成功实施,证明了该施工技术结构受力明确,施工便捷、速度快。     

川江上游船型比选思路探讨

本文在分析川江上游运输船舶现状的基础上,提出船型比选的原则,并阐述了对现有船型比选的思路和方法,最后介绍了采用VB开发的计算机比选程序。     

Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

东营黄河大桥上部结构施工支架及挂篮关键技术

东营黄河大桥主桥上部结构(116 200 220 200 116)m预应力混凝土刚构连续结合梁的箱梁采用菱形挂篮悬臂施工法。介绍了主墩和次主墩0号块施工分别选取的支架方案,以及现浇直线段的支架方案。阐述了挂篮的试压方法,并对其试压结果进行了分析。     

洛卢公路洛河大桥设计简介

介绍了洛卢公路洛河大桥所采用的技术标准、桥型、截面型式及结构计算,并介绍了该桥设计在构造上所做的特殊处理及施工要点。     

应用复合梁单元实现钢管混凝土拱桥的极限承载力分析

进行大跨度钢管混凝土拱桥的极限承载力分析,需要综合考虑几何和材料非线性、混凝土收缩和徐变、温度变化等多种因素的影响。本文从固体力学的基本理论出发,建立适于考虑上述诸多因素的复合梁单元,阐述了基于该单元的钢管混疑土拱桥极限承载力分析程序的实现方法,并通过与一个哑铃形截面钢管混凝土组合式拱肋极限承载力试验结果的对比验证了其可行性。     

芜湖长江大桥吊索塔架的设计与施工

芜湖长江大桥无为岸九孔钢梁中有八孔采用吊索塔架辅助全伸臂方法施工。吊索塔架为轴心受压杆件,经吊索传来的力通过塔架中心立柱顶部拉板分配给中心立柱,中心立柱通过其下的支承座支承在钢梁顶的支承垫座上,将力传给钢梁。当塔架作业时,中心立柱将被顶起,塔架的走行结构也将被顶离轨顶。吊索塔架由中心立柱、立柱下支承座、垫座、万能杆件系统、走行结构、吊索和锚箱及下锚箱加长拉板等几部分组成。走行机构有四组,走行轨道设在钢梁上弦杆顶。中心立柱由标准节、顶节、底节、顶部拉板和立柱上支承座五部分组成。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

阜朝高速公路湿陷性黄土段小桥涵地基的处治

湿陷性黄土易产生沉降变形,且承载力低。本文介绍阜朝高速公路湿陷性黄土段小桥涵地基处治的一些方法。