T型焊接接头疲劳性能研究

T型焊接接头在船舶与海洋工程结构中广泛应用,研究T型焊接接头的疲劳性能对于提高船舶与海洋工程结构的强度具有重要意义.针对工程中常用的四种焊趾形式的T型焊接接头,利用有限元计算和模型试验两种方法对其疲劳性能进行了研究.结果表明,平面型焊趾是较优的T型接头焊趾形式.     

基于SD 仿真的广西北部湾港集疏运系统协调发展研究*

为分析港口集疏运系统的行为特征和发展趋势,首先依据协同论等相关理论,对港口集疏运系统协调发展内涵进行了界定。其次以广西北部湾港口为研究对象,运用系统动力学的原理及仿真方法,在系统分析和因果反馈分析的基础上建立了港口集疏运协调发展的系统动力学模型,包括港口吞吐需求、吞吐能力、集疏运结构及货源结构4个子模块。模型结构与行为等检验方式验证了该模型的有效性。最后基本模拟和政策模拟结果分析为港口集疏运发展决策提供理论依据和指导。     

不同海况下小侧体三体船的艏部结构砰击特性

本文运用CFD软件STAR-CCM+建立三体船在波浪条件下的三维砰击模型,采用重叠网格技术结合船舶六自由度系统模拟船体的砰击运动,对不同波高、波长以及不同航速下的船体砰击进行数值模拟,对比分析各工况下船体结构的运动响应和砰击特征。数值模拟结果表明：航速变化对船体砰击压力有显著影响,而波高和波长的变化对砰击压力影响较小但也不可忽视。     

贵阳机场岩溶洼地填筑体变形与稳定性数值模拟

以贵阳龙洞堡国际机场试验段工程为例对岩溶洼地填筑体变形及稳定性进行数值模拟研究。研究结果表明:强夯对岩溶洼地地基土处理具有较好的效果,能有效降低填筑体的沉降量及边坡位移量;填筑体沉降量随着填筑体厚度减小而减小。     

Virtual durability test rigs for automotive engineering

In recent years so-called ‘virtual test rigs’ have become more and more important in the development process of cars and trucks. Originally, the idea was to substitute expensive durability tests with computer simulation. Meanwhile, the focus has changed towards a more cooperative usage of numerical and laboratory rig simulation. For many safety critical issues laboratory tests remain indispensable. In early development stages, when no physical prototypes are available yet, numerical simulation is used to analyse and optimise the design. In this paper, we show how to build numerical simulation models of complex servo-hydraulic test systems and their test specimen using multi-body simulation for the mechanics in combination with simulation models for the hydraulics and controls. We illustrate this at two industrial application examples: a spindle-coupled passenger car suspension rig and a tyre-coupled full vehicle rig. We show how the simulation models are used to design and optimise better test rigs and to support the test rig operation by preparing the physical tests with new specimen, i.e. by performing numerical simulations including numerical drive file iteration before the physical tests start.     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

Virtual test rig to improve the design and optimisation process of the vehicle steering and suspension systems

A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.     

船舶电网频率实时检测仿真研究

针对电力推进船舶电网频率的实时精确检测,阐述了基于二阶直接型IIR数字陷波器的基本原理,基于LMP(p=3)自适应算法建立了在跟踪陷波器参数基础上的船舶电网频率实时检测模型,并分别在电网频率不变、频率发生阶跃变化以及频率线性变化的不同情况下进行了基于Simulink的仿真研究。仿真结果验证了提出的频率检测方法的实时性和精确性。     

基于计算机自动控制技术的多探头测深系统研制与改造

通过加装控制盒的方式,实现单探头测深仪与自动控制探头之间的流畅切换,将传统单探头测深仪改造成具有多探头功能的高效水下测量仪器系统,主要用于航道和码头基床等的水下扫测。利用该系统进行的码头基床扫测已经取得成功,可为同类测量设备的改造提供全新的思路。     

南港—北槽洪枯季沿程水沙盐特性分析*

利用2012年2月及8月长江口南港—北槽大、小潮水文测验资料,从涨落潮历时、流速、含沙量及含盐度等方面 分析了南港—北槽洪枯季水沙盐纵向及垂向分布特征以及潮周期内含沙量变化特性。分析表明：南港—北槽沿程各垂线落 潮平均历时洪季整体较枯季长,涨潮平均历时洪季整体较枯季短,且小潮期洪、枯季的这种差异更为明显;南港—北槽洪 季落潮流速普遍大于枯季,涨潮流速普遍小于枯季;小潮期涨潮平均流速会出现近底层较表层大现象, 且CSW-CS3出现滞 流点;北槽中段—口外段洪季含沙量及垂向差异均较枯季大,南港圆圆沙段及北槽上段枯季含沙量较洪季大;潮周期内北 槽中段各垂线上层含沙量均较小,且变化幅度相对较小,但下层含沙量变化达数倍乃至十几倍之多,且涨憩时段近底层含沙 量可能特别高;洪枯季北槽中段均存在盐水楔,其位置洪季偏上、枯季偏下,最大浑浊带洪枯季位置变化与此基本一致。