内置橡胶支撑体空气弹簧冲击隔离分析

针对内置橡胶支撑体空气弹簧的冲击隔离问题,建立了理论模型,并给出数值解法。采用该模型和解法进行实例分析,得到了相关结论。     

橡胶阻滑板与抛石基床摩擦系数统计特性与影响因素

长江口工程北导堤NⅡB标段采用在半圆形沉箱底板设置橡胶阻滑板的方法提高沉箱与抛石基床之间摩擦系数,作为抗地基土动力软化的工程措施。利用该项目试验数据,分析橡胶阻滑板与抛石基床的摩擦系数的统计特性与影响因素。分析结果表明,同一基床应力下摩擦系数试验值的概率分布接近于正态分布,摩擦系数的总体平均变化趋势随基床应力的增加略有降低,但全部试验数据的统计假设检验不支持这一观点,摩擦系数随基床应力的变化规律需要进一步研究。     

富水砂卵层基坑封闭降水与回灌工程关键技术

根据济南泉域富水砂卵石地层特点,通过文献调查、理论分析、现场实测,并借助数值模拟计算,分析并优化基坑下卧弱隔水层注浆加固方案,得到注浆加固质量控制技术要点,提出端头井土体加固与封闭止水帷幕下辅助降水的关键技术,研发基坑降水回灌一体化系统及配套装备,攻克传统回灌技术存在的抽灌分离、回灌效率低、运维成本高等施工难题,阐述回灌水质处理、自动加压回灌及水位联动回灌等关键技术创新点,改良回灌井过滤器设置及止水段施工技术,形成富水砂卵层基坑封闭降水与回灌工程关键技术,对推广基坑降水与回灌工程的绿色化、信息化、智能化有一定指导作用。     

秦淮河航道整治中的水下爆破技术

阐述了覆盖层秦淮河对戴家岗段航道水下钻孔爆破的影响,介绍了内河航道水下钻孔爆破的设计与施工工艺,并提出了相应的解决方法.     

客运专线路基褥垫层施工技术

本文主要介绍哈尔滨至大连铁路客运专线褥垫层施工工艺。     

Impact of macrozoobenthic structures on near-bed sediment fluxes

Sandy sediments in shallow coastal waters of the Baltic Sea are often characterised by large numbers of biogenic structures which are produced by macrozoobenthos species. A series of experiments was devised to quantify how the interaction of such structures with the near-bed flow regime affects the sediment flux. Most experiments were done with simplified replicates of structures generated by typical species commonly found in the Mecklenburg Bight, starting with solitary structures and regularly-spaced arrays in a range of characteristic population densities, followed by a complex benthic macrofauna community, both artificial and alive. A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a topography scanning laser, was used for high-resolution measurements (2 mm horizontal step size and 0.3 mm vertical resolution) of sand erosion (220 µm median grain size, at 20 cm s^− 1) and fine particle deposition (8 µm grain size, at 5 cm s^− 1). Sediment transport threshold values were measured for each layout. As a rule-of-thumb, both the erosion fluxes and the deposition of suspended matter increased considerably at low population densities (below 2%, expressed as percent of the sediment surface covered, i.e. roughness density RD). Above densities of 4%, erosion almost stopped inside the test arrays, and deposition remained well below the level of unpopulated areas. An attempt to extrapolate these findings to field conditions (using field current velocity data from 2001) showed that the net flux switched from erosion to deposition for densities above 5%. These parameters can now be integrated into a numerical sediment transport model coupling waves, currents, sediment dynamics and biological processes, which is currently under construction at the Baltic Sea Research Institute (IOW), Rostock, Germany.     

Characteristic flow patterns generated by macrozoobenthic structures

A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a bottom scanning laser, was used for detailed, non-intrusive flow measurements (at 2 cm s^− 1 and 10 cm s^− 1) around solitary biogenic structures, combined with high-resolution mapping of the structure shape and position. The structures were replicates of typical macrozoobenthic species commonly found in the Mecklenburg Bight and with a presumed influence on both, the near-bed current regime and sediment transport dynamics: a worm tube, a snail shell, a mussel, a sand mound, a pit, and a cross-stream track furrow. The flow was considerably altered locally by the different protruding structures (worm tube, snail, mussel and mound). They reduced the horizontal approach velocity by 72% to 79% in the wake zone at about 1–2 cm height, and the flow was deflected around the structures with vertical and lateral velocities of up to 10% and 20% of the free-stream velocity respectively in a region adjacent to the structures. The resulting flow separation (at flow Reynolds number of about 4000 and 20,000 respectively) divided an outer deflection region from an inner region with characteristic vortices and the wake region. All protruding structures showed this general pattern, but also produced individual characteristics. Conversely, the depressions (track and pit) only had a weak influence on the local boundary layer flow, combined with a considerable flow reduction within their cavities (between 29% and 53% of the free-stream velocity). A longitudinal vortex formed, below which a stagnant space was found. The average height affected by the structure-related mass flow rate deficit for the two velocities was 1.6 cm and 1.3 cm respectively (80% of height and 64%) for the protruding structures and 0.6 cm and 0.9 cm (90% and 127% of depth) for the depressions. Marine benthic soft-bottom macrozoobenthos species are expected to benefit from the flow modifications they induce, particularly in terms of food particle capture due to altered particle pathways and residence times, but also for the exchange of gases, solutes and spawn. The present results confirm previous studies on flow interaction effects of various biogenic structures, and they add a deeper level of detail for a better understanding of the fine-scale effects.     

Non-local simulation of the stable boundary layer with a third order moments closure model

A new higher order closure model for the stable boundary layer is presented and compared with Large Eddy Simulation data. The model includes numerical solutions for the mean values, second and third order moments equations. A satisfactory agreement is found between the calculated vertical profiles of the turbulent quantities with those provided by the LES. Furthermore the new model results are compared with profiles obtained with a lower order closure model in order to verify the effective importance of including third order dynamical equations in the model.     

双层嵌套多目标概率模型在珠江三角洲港口工程环境分析中的应用

鉴于未来全球气候变暖、台风强度和频次有逐渐加剧的趋势,建港地区工程风险须得到重视。在分析了珠江三角洲所受台风灾害的基本类型后,采用双层嵌套多目标概率模式及复合极值分布模型（MCEVD）对珠三角的台风灾害及超强台风进行了预测,并将计算结果应用于港区最大风速、波高、排水等方面的设计。该模型能全面系统地反映台风致灾的整体机制,在港口工程环境分析中得到了较好的应用。