A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

灌注桩深基坑的有限元计算及影响因素分析

对苏州市轨道交通2号线金民东路站深基坑使用灌注桩作为支挡结构的开挖、支护施工进行了有限元数值模拟,据此分析了灌注桩内力、水平侧移等随施工过程的变化以及主体结构的内力情况,并研究了灌注桩刚度、地基土刚度对支护结构侧移和弯矩的影响,对实际施工起到一定的指导作用。     

高坝枢纽新建通航建筑物轴线及通航条件研究

针对山区已建高坝枢纽新建通航建筑物轴线布置受河道窄、水头高、电站泄流及已有建筑物影响等条件限制的问题,依托贵州清水江白市水电站枢纽新建通航建筑物工程,采用1∶100正态整体水工模型与自航遥控船模相结合的技术手段,对多条轴线布置方案进行通航水流条件及船舶航行操控研究与优化。试验结果表明,右岸轴线布置方案通航水流条件及船舶航行状态均较好,为推荐方案。研究成果解决了工程关键问题,可供类似已建高坝水利枢纽新建或扩建通航建筑物工程参考借鉴。     

浅谈南京紫金山东站房建筑设计创作过程

当前,人们对站房建筑方案关注程度越来越高。站房是一个有机整体,而不仅仅是几个孤立的建筑。因此,针对南京紫金山东站房的创作过程进行研究,通过对方案的分析,寻找站房空间的特征及构成要素,阐明它们的内部和外部关系,以求更系统地认识铁路站房的设计特色。以紫金山东站房实例,阐述了"感性"创作手法因素在建筑中的应用,分别从站房设计的六个因素:设计理念、总体布局、平面布局、建筑造型、交通组织、细部设计进行探索。     

形状记忆合金对纤维增强聚合物梁驱动效应的分析

着重研究了形状记忆合金偏心埋置于树脂复合材料梁/板后,合金在逆相变过程中对梁弯曲变形的驱动效应。试验结果表明:合金在逆相变过程中能对树脂基复合材料梁产生很大的驱动力,可以按需要主动控制复合材料梁、柱的变形;合金的预应变值因素对于合金的驱动效应有较大影响,合金可以进行多次激励。     

海湾大桥北引道沥青混凝土罩面设计

结合广东省汕汾高速公路汕头海湾大桥北引道路面加铺工程,分析软基路段过渡性路面的病害,提出沥青混凝土路面罩面结构设计和施工中须注意的问题.     

机车车辆焊接结构疲劳分析关键问题研究

为确保铁道机车车辆各焊接承载部件在整个寿命期间安全可靠,在分析国际上对动态承载焊接结构疲劳研究的基础上,提出机车车辆焊接部件疲劳分析应明确的各类关键问题.主要包括焊接结构的疲劳特征、应力分析原则和应力谱的确定、疲劳评定方法和强度数据的选取、累积损伤准则的实际应用及多轴疲劳的处理方法等.疲劳理论经典算法表明,上述关键问题的较好解决将有助于大幅地提高疲劳分析精度,将其应用于结构设计可保证焊接承载部件具有足够的疲劳强度.     

地铁车站工程抗浮措施的技术经济比较

以北京地铁奥运支线森林公园站、奥林匹克公园站抗浮施工为实例,通过对降水、锚固、配重混凝土、摩擦桩、扩底桩、挤扩支盘桩6种抗浮措施的比较分析,阐述挤扩支盘灌注桩的适用性、技术经济性。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

“s”型覆岩空间结构的冲击地压危险区预测

基于微地震监测和覆岩空间结构理论，以山东华丰矿1410工作面为例，分析了“s”型覆岩空间结构的形成，利用理论方法和微地震监测预测并圈定了华丰矿1410工作面发生冲击地压的危险区域，研究了“s”型覆岩空间结构的冲击地压危险区分布规律，为现场预测和控制冲击地压灾害提供了理论基础。