BRT专用车道站台段钢桥面铺装的一种解决方案

BRT专用车道的定点停车位作为铺装的薄弱点,若铺装层的高温动稳定性不足将造成该处形成剪切推移、车辙等病害。以贵阳市中环路为背景,对BRT专用车道站台段钢桥面铺装的四个方案进行比选,并选取热拌式沥青混凝土作为实施方案,经验证效果良好,可为国内外的类似工程提供参考。     

深基坑中型钢结合水泥土搅拌桩作为立柱桩的应用

立柱是大面积基坑水平支撑体系的重要组成部分,而在基坑围护设计施工时,采用型钢结合水泥土搅拌桩作为立柱桩的情况较为少见。为此,介绍了某SMW工法桩围护基坑工程中,型钢结合水泥土搅拌桩作为立柱桩的应用情况,以期为类似工程提供一定参考。     

不同改性剂改性沥青性能分析

通过常规试验和SH RP沥青试验,对国内外常用的几种不同改性剂改性沥青的性能进行了对比研究,同时结合相应改性沥青混合料的高温性能、低温性能和疲劳性能研究,比较了不同改性沥青的路用性能。     

板底压浆对水泥混凝土路面板脱空处治研究

根据广西桂柳高速公路管理处日常养护调查情况,选择柳州至王灵高速公路中三段脱空比较严重路段作为试验路段,采用板底压浆方式进行处治,从原材料质量、压浆材料配合比、施工工艺以及施工质量检测等多个环节加以控制。通过板底压浆效果评定指标可以得出,压浆前、后路面板的传荷系数由68.6%增大至80.3%,脱空率由42.6%减少至13.3%,压浆效果良好,对处治板底脱空具有很好的应用。     

橡胶粉改性MAC沥青混合料路用性能的研究

主要讨论了橡胶粉在MAC沥青混合料中的应用,研究了橡胶粉干法改性沥青混合料高温性能、抗水损害性能及混合料的抗飞散性能,证明了其优良的路用价值。     

干线公路高模量沥青混凝土应用研究

文章试验研究了不同PR/RA改性剂掺量的高模量沥青混凝土(HMAC)的抗车辙性能,分析了层位、层厚、模量、轴载、温度和荷载次数等因素对高模量沥青混凝土路面抗车辙性能的影响程度,提出了合理的路面层位设置、模量取值范围及路面结构组合,并通过某干线公路试验路段,验证了高模量沥青混凝土的抗车辙效果。     

旧水泥混凝土路面冲击碾压技术初探

文章结合G206国道宿州至怀远段旧水泥混凝土路面改造施工实例,介绍了冲击碾压施工的原理、特点、质量控制措施及安全文明施工注意事项,并分析了冲击碾压施工中存在的问题与对策,为类似工程的改造施工提供参考。     

Superpave-13沥青混合料高温稳定性分析

文章结合天水过境高速公路路面实体工程,对不同孔隙率条件下的Super-pave-13高性能沥青混合料进行了车辙试验及SPT试验分析。结果表明,要保证Superpave-13沥青混合料具有较好的高温稳定性,其压实孔隙率应控制在4%～6.5%范围内。     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.