基于视距的城市道路线形指标及优化措施研究

城市道路由于受到建设条件制约经常会采用较小的平、纵线形指标,其中地下道路和高架道路的曲线路段由于受到中隔墙、侧墙、结构顶板或防撞墙、防眩设施、声屏障等结构物的影响,易造成视距不足,为道路运营带来了安全隐患。在总结分析行车视距验算方法及规范要求值的基础上,采用数值解析法计算得到城市道路不同设计速度和视距要求下的平曲线、竖曲线半径对应值,并提出了视距不足时的优化设计措施,以期为日后的相关工作提供参考。     

多轴专用车底盘轴荷估算方法

在理论计算和实践经验的基础上,论述和介绍了多轴(三轴及三轴以上)专用汽车底盘方案设计阶段轴荷估算的方法.     

桑塔纳汽车后桥强度有限元分析及改进方案

根据桑塔纳2000汽车后桥的实际结构，利用通用有限元软件ANSYS，对后桥进行了弹塑性静态结构有限元分析。主要研究了结构焊接处强度、横梁破坏处在半个周期载荷波内应力状态变化；给出了在最大剪应变幅平面上，影响疲劳强度及寿命的基本参量的计算结果；提出了提高后桥强度的改进方案。     

三轴汽车前后轮角输入时的响应特性

本文详细推导了三轴汽车线性二自由度模型的运动微分方程，分析了汽车对前后轮角输入时的移居记响应特性。从汽车动力学的角度讨论了前后轮转应具备的比例关系。该方法同样适用于其它多轴汽车的建模分析。     

汽车防追尾碰撞数学模型研究

为了提高车辆在高速行驶状态下的主动安全性能,研究了处于追尾行驶状态的本车与前车的运动学特征;针对前车的不同运动状态分别推导出了跟车距离的计算模型并分析了模型中3个关键参数的随机性和动态性,对制动迟滞时间提出了基于模糊推理的确定方法,对本车制动减速度和前车的运动加速度提出了比较实用的动态测算公式;另外,研究了防追尾碰撞的控制与执行,建立了动态调整安全制动停车距离的神经网络模型,提出了基于危险裕度判别的安全控制方法。     

应用线弹性疲劳损伤理论的沥青路面轴载换算

应用疲劳损伤力学基本原理,探讨了适用于沥青路面轴载换算的新方法,并对该方法拟合的公式与规范按弯沉等效推荐的当量轴载换算公式进行了比较。计算结果表明在进行沥青路面轴载换算时,采用不同的等效换算原理,将导致非标准轴载与标准轴载当量换算系数上的不同,前者较后者大。这种差异一方面直接影响沥青路面的结构厚度设计,对设计年限内累计当量标准轴载作用次数的低估,必然导致沥青路面早期破损现象的发生;另一方面揭示弯沉等效表征的是路面结构的瞬间刚度性质,代替不了路面结构的长期疲劳强度特性。     

长大货物车适应THDS轴温探测技术的研究

针对不适应THDS轴温探测系统的长大货物车,分析论证了现车轴箱改进方案适应THDS轴温探测的不足,并提出了轴箱优化方案。经计算、试验和装车验证表明,新轴箱可行、有效、安全,满足THDS轴温探测要求,保证了长大货物车运输安全。     

移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

Fast-charging station choice behavior among battery electric vehicle users

This study explores how battery electric vehicle users choose where to fast-charge their vehicles from a set of charging stations, as well as the distance by which they are generally willing to detour for fast-charging. The focus is on fast-charging events during trips that include just one fast-charge between origin and destination in Kanagawa Prefecture, Japan. Mixed logit models with and without a threshold effect for detour distance are applied to panel data extracted from a two-year field trial on battery electric vehicle usage in Japan. Findings from the mixed logit model with threshold show that private users are generally willing to detour up to about 1750 m on working days and 750 m on non-working days, while the distance is 500 m for commercial users on both working and non-working days. Users in general prefer to charge at stations requiring a shorter detour and use chargers located at gas stations, and are significantly affected by the remaining charge. Commercial users prefer to charge at stations encountered earlier along their paths, while only private users traveling on working days show such preference and they turn to prefer the stations encountered later when choosing a station in peak hours. Only private users traveling on working days show a strong preference for free charging. Commercial users tend to pay for charging at a station within 500 m detour distance. The fast charging station choice behavior is heterogeneous among users. These findings provide a basis for early planning of a public fast charging infrastructure.     

Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.