水泥混凝土搅拌输送车液压传动系统设计

以8 m3水泥混凝土搅拌输送车为例,介绍了混凝土搅拌输送车驱动方案和液压系统主要参数的确定,传动系统原理图的拟定以及各液压元件的选型及功率、扭矩校核,并对整个系统的扭矩和功率流程进行了校核,保证了整个系统设计的合理性和可靠性.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Model based urban traffic control,part II: Coordinated model predictive controllers

The present paper describes how to use coordination between neighbouring intersections in order to improve the performance of urban traffic controllers. Both the local MPC (LMPC) introduced in the companion paper (Hao et al., 2018) and the coordinated MPC (CMPC) introduced in this paper use the urban cell transmission model (UCTM) (Hao et al., 2018) in order to predict the average delay of vehicles in the upstream links of each intersection, for different scenarios of switching times of the traffic lights at that intersection. The feedback controller selects the next switching times of the traffic light corresponding to the shortest predicted average delay. While the local MPC (Hao et al., 2018) only uses local measurements of traffic in the links connected to the intersection in comparing the performance of different scenarios, the CMPC approach improves the accuracy of the performance predictions by allowing a control agent to exchange information about planned switching times with control agents at all neighbouring intersections. Compared to local MPC the offline information on average flow rates from neighbouring intersections is replaced in coordinated MPC by additional online information on when the neighbouring intersections plan to send vehicles to the intersection under control. To achieve good coordination planned switching times should not change too often, hence a cost for changing planned schedules from one decision time to the next decision time is added to the cost function. In order to improve the stability properties of CMPC a prediction of the sum of squared queue sizes is used whenever some downstream queues of an intersection become too long. Only scenarios that decrease this sum of squares of local queues are considered for possible implementation. This stabilization criterion is shown experimentally to further improve the performance of our controller. In particular it leads to a significant reduction of the queues that build up at the edges of the traffic region under control. We compare via simulation the average delay of vehicles travelling on a simple 4 by 4 Manhattan grid, for traffic lights with pre-timed control, traffic lights using the local MPC controller (Hao et al., 2018), and coordinated MPC (with and without the stabilizing condition). These simulations show that the proposed CMPC achieves a significant reduction in delay for different traffic conditions in comparison to these other strategies.     

STAAD.Pro在海洋工程模块吊装设计中的应用

对STAAD.Pro软件在海洋工程模块建造的加工设计阶段的应用进行了探讨。通过STAAD.Pro软件的可视化操作平台,对实际海洋工程模块进行建模、加载、计算和分析,通过计算得出模块的质量和质心位置,并根据规范对模块进行整体强度校核,从而对海洋工程模块的吊点布置及其吊装过程起到实际的指导作用。     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

建构中高职衔接物流专业模块化课程体系研究

建立中职与高职的有效衔接是完善职业教育体系和提高职业教育质量的关键，通过分析目前物流专业中高职课程衔接在课程体系、教学计划、教学管理、考评制度方面存在的割裂现象，提出应借鉴国外的做法，加强宏观制度建设，建立统一的职业能力导向的模块化课程体系。     

自动液位监控系统的设计

结合工业生产和生活中的实际问题,以STC89C52单片机为核心,通过外围硬件电路达到液位监控的目的.该系统主要是实时监测液位变化并进行显示输出.此外,系统在液位不满足要求的情况下,实现自动注水或放水,保证系统的水位在规定的范围内.本设计的液位显示通过LCD1602实现,液位测量部分使用了超声波测距模块,分辨率高,且为非接触式测量,抗干扰能力强.而对于液位的控制部分主要通过C语言编程来实现,同时增加了液位报警功能.     

带分布式动力吸振器基座振动传递特性研究

在弹性梁上等间距安装吸振器,构建带分布式动力器的基座系统,建立了Euler梁-吸振器-弹性支承耦合系统的力学模型。给出了子结构的导纳矩阵,推导了基座的动态特性传递方程,得到了基座系统的力传递率表达式,并详细讨论了系统参数对基座减振性能的影响。搭建了带分布式吸振器基座系统实验平台,对电阻应变式力传感器进行了标定,测试了基座的力传递率特性。数值仿真与实验测试结果均表明,带分布式动力吸振器基座在低频取得了优越的减振效果。     

新型透空板式防波堤消浪效果试验研究

为增大双层板式防波堤的波能耗散和防波堤结构的稳定,提出了的一种新型桩基双层板式防波堤,通过物理模型试验,对比分析了该防波堤结构（模型 c）与另两种结构型式的防波堤（模型 a、b）在不同的波浪参数下透射系数、反射系数的变化关系,探讨了新型桩基双层板式防波堤（模型 c）透射系数、反射系数随相对波高、相对水深及相对淹没深度的变化关系,分析了其波能损耗情况。结果表明,在试验范围内,对于长周期波,模型 c 比其他两种型式的防波堤消波效果好;当水深与模型顶平齐时新结构（模型 c）对波能的消耗大于淹没和出水两种情况,说明防波堤高程与水位平齐时其消波效果较好。     

海面浮标通信电波传播损耗研究与仿真

论文从海上无线电通信特点出发,采用Longley-Rice模型对海面浮标中继通信系统电波传输损耗进行仿真研究,确立了海面浮标通信与海洋环境及通信系统结构的关系,通过对海面浮标通信电波传播损耗进行研究,为浮标通信系统设计特别是对浮体结构设计提供必要的理论依据。