全自动运行线路车载无线通信设备的唤醒自检项方案

车载无线通信设备为地铁全自动运行提供了车地无线通话功能、乘客紧急对讲功能及控制中心对列车的广播功能,是列车安全运行的关键设备。介绍了无线车载台的设备结构及功能,根据全自动运行特点描述了无线车载台自检过程。结合全自动运行线路实际场景分析,总结得出列车唤醒车载无线设备的自检项。     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

Extreme hawser tension assessment for FPSO vessel during offloading operation in Bohai bay

The Floating Production Storage and Offloading Unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport.Robust prediction of extreme hawser tensions during Floating Production Storage and Offloading (FPSO) operation is an important safety concern. Excessive hawser tension may occur during offloading operations, posing an operational risk. In this paper, AQWA has been used to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions. Experimental validation of numerical results has been discussed as well.This paper advocates methodology for estimating extreme response statistics, based on simulations (or measurements). The modified ACER (averaged conditional exceedance rate) method is presented in brief detail. Proposed methodology provides an accurate extreme value prediction, utilizing all available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the improved ACER method can provide more robust and accurate prediction of the extreme hawser tension.Data declustering issue has been addressed. Paper highlights ability of ACER method to account for a set of varying sea state probabilities, as required in engineering long term statistical analysis.Described approach may be well used at the vessel design stage, while defining optimal vessel parameters that would minimize potential FPSO hawser tension.     

Evaluating determinants of attractiveness and their cause-effect relationships for container ports in Taiwan: users’ perspectives

The attractiveness of ports is usually a pre-requisite and necessary condition for ports to achieve competitiveness, as well as the springboard to explore the competitive advantages of ports. To determine whether a port is competitive, it is necessary to explore whether it boasts certain factors that make the port attractive to users. The main purpose of this article is to apply the Analytic Hierarchy Process (AHP) method and the Decision Making Trial and Evaluation Laboratory (DEMATEL) technique to evaluate key determinants of attractiveness and their cause/effect relationships for container ports in Taiwan. The empirical results showed that: (1) Top six determinates of attractiveness for container ports are ‘ample cargo sources,’ ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ ‘efficient wharf operations,’ and ‘adequate wharfs and back-line land,’ respectively. (2) Among the above six determinants of attractiveness, ‘ample cargo sources’ is the cause determinant. Three determinants of port attractiveness, ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ which are the effect determinants. They are affected by the determinants of attractiveness of ‘ample cargo sources’. In addition, this study discusses the above findings and expects to provide the study results to Taiwan’s port authorities for reference.     

基于深度强化学习的智能船舶航迹跟踪控制

[目的]智能船舶的航迹跟踪控制问题往往面临着控制环境复杂、控制器稳定性不高以及大量的算法计算等问题。为实现对航迹跟踪的精准控制,提出一种引入深度强化学习技术的航向控制器。[方法]首先,结合视线(LOS)算法制导,以船舶的操纵特性和控制要求为基础,将航迹跟踪问题建模成马尔可夫决策过程,设计其状态空间、动作空间、奖励函数;然后,使用深度确定性策略梯度(DDPG)算法作为控制器的实现,采用离线学习方法对控制器进行训练;最后,将训练完成的控制器与BP-PID控制器进行对比研究,分析控制效果。[结果]仿真结果表明,设计的深度强化学习控制器可以从训练学习过程中快速收敛达到控制要求,训练后的网络与BP-PID控制器相比跟踪迅速,具有偏航误差小、舵角变化频率小等优点。[结论]研究成果可为智能船舶航迹跟踪控制提供参考。     

Hydroelastic analysis of oblique irregular waves with a pontoon-type VLFS edged with dual inclined perforated plates

The fluid-structure interaction of oblique irregular waves with a pontoon-type very large floating structure (VLFS) edged with dual horizontal/inclined perforated plates has been investigated in the context of the direct time domain modal expansion theory. For the hydroelastic analysis, the boundary element method (BEM) based on time domain Kelvin sources is implemented to establish water wave model including the viscous effect of the perforated plates through the Darcy’s law, and the finite element method (FEM) is adopted for solving the deflections of the VLFS modeled as an equivalent Mindlin thick plate. In order to enhance the computing efficiency, the interpolation-tabulation scheme is applied to assess rapidly and accurately the free-surface Green function and its partial derivatives in finite water depth, and the boundary integral equation of a half or quarter VLFS model is further established taking advantage of symmetry of flow field and structure. Also, the numerical solutions are validated against a series of experimental tests. In the comparison, the empirical relationship between the actual porosity and porous parameter is successfully applied. Numerical solutions and model tests are executed to determine the hydroelastic response characteristics of VLFS with an attached anti-motion device. This study examines the effects of porosity, submerged depth, inclined angle and gap distance of such dual perforated anti-motion plates on the hydroelastic response to provide information regarding the optimal design. The effects of oblique wave angle on the performance of anti-motion and hydroelastic behavior of VLFS are also emphatically examined.     

基于时延特性建模的多断面短时交通流预测

针对现有交通流预测方法未充分考虑多断面车流演变规律，提出基于时延特性建模的时空相关性计算方法. 该方法采用对不同断面、不同时刻交通流的分布相似性度量，对输入的车辆到达数据序列进行切割构建时空相似度矩阵，得到相邻断面之间的时延参数. 基于时延特性建模，将多断面之间的流量信息进行融合，使用长短时记忆(LSTM)网络进行流量预测. 通过对实际路段数据的预测和结果分析，验证所提方法的有效性和实用性.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

基于价值工程的全生命周期趸船材质方案比选研究

将趸船整个生命周期过程中的技术先进性、经济合理性和环境协调性有机地融合为一体,基于价值工程理论提出趸船材质方法比选。实例表明在千岛湖这样的大吨位船舶碰撞概率很小的水域,采用混凝土趸船明显优于钢质趸船。