发射型钹式换能器的研究

为分析低频钹式换能器的发射电压响应、辐射声功率、发射效率等性能参数,通过ANSYS有限元软件建立了发射换能器的轴对称模型,设计了不同结构参数的共振频率为2kHz左右发射型钹式换能器,从结构阻尼入手,通过仿真分析计算,得到换能器的带宽、品质因数等,比较了不同结构参数的换能器的各项性能,绘制了不同结构参数的发射电压响应曲线,为分析设计钹式换能器提供了理论依据。     

基于AIS网络的VTS信息智能推送应用研究

文中在通过利用智能手段采用AIS网络对航行计划、交通管制、水文气象等VTS相关信息进行推送的相关领域进行了研究,以便提高船舶信息获取效率,减少VTS服务工作强度。     

浅析汽车自动变速器故障检测与维修

自动变速器与手动变速器相比较,它所关联的知识面更加的广泛,机械的结构也更加的复杂,控制的原理也更加的有难度,所以在自动变速器故障检测以及维修的要求也会更高。自动变速器如若发生故障之后,需要专门的工具以及按照相关的程序进行检测维修,才能及时准确的找出故障问题,并且能够降低返修机率的发生。本文主要对汽车自动变速器的工作原理介绍,并且提出了相关的故障形成原因,最后也给出了排除故障以及维修方法。     

行星齿轮传动齿根动应力计算

针对功率分流行星齿轮传动齿轮重合度大,齿根应力计算工作量大的问题,对齿根动应力的计算问题进行了详细的研究。并以功率分流差动级太阳轮为例,对模型的建立方法、网格的划分方法、载荷的施加方法进行了详细的分析。利用Ansys中的APDL语言形成载荷文件,来控制在1个啮合周期内若干对接触线位置上载荷的施加。本文的计算方法可以精确、快速地得到1个齿在啮合过程中齿根的动应力。     

天然气输送用双抗型钢管的焊接工艺试验研究

为了研究影响双抗型钢管的抗氢诱导裂纹和抗硫化物应力腐蚀开裂的产生因素,对某双抗型钢管采用双V型坡口形式,通过不同线能量下手工电弧焊工艺施焊后,对焊接接头的力学性能、焊接裂纹性能、最高硬度、金相组织进行试验分析.采用美国腐蚀工程师协会的试验方法进行试验,发现钢管焊缝试样的硫化氢应力腐蚀裂纹大多沿着粒状贝氏体晶界和焊缝组织...     

长距离密闭输油管道的水击数值模拟

在长距离密闭输油管道中间泵站断电停运的情况下,采用特征线法对全线压力变化情况进行了数值模拟。结果表明:越是靠近下游的泵站停运后,越能更快地形成越站输送,出现进站压力小于泵吸入压力的时间越晚,管道的最大压力越大,管道出现液柱分离的机会越小等。     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

Exchange rate and transport cost sensitivities of bilateral freight flows between the US and China

This paper explores the long-run impacts of gross domestic product, exchange rate, and transport costs on bilateral air and ocean freight flows between the US and China. The study employs a cointegration framework by using export and import data over the period of 2003:Q1-2014:Q2. Results show that gross domestic product is the key determinant of bilateral freight flows, indicating that real income of a trading partner is a driving force of the bilateral freight flows between the US and China. In examining the sensitivities of the bilateral trade flows, air freight flows are found to be more responsive to a real income change than ocean freight flows. The bilateral exchange rate is a significant factor affecting the freight flows from China to the US, suggesting that a US dollar appreciation against the Chinese yuan increases the inflows of Chinese commodities to the US. The impacts of the bilateral exchange rate and transport cost are found to vary at industry and commodity levels. These findings support the importance of employing disaggregate data in the bilateral freight flow analysis.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

PA66-GF30透光率对激光透射焊接性能的影响

通过对不同及相同厚度的本色和黑色激光透射PA66-GF30材料进行透光率测试,对焊接后的试样进行拉拔测试.文章分析了厚度对透光率的影响,相同厚度材料颜色、透光率对焊接强度的影响.结果表明,随着厚度的升高材料透光率下降;相同厚度材料的透光率升高,其焊接强度也依次升高,且本色与黑色的PA66-GF30焊接强度要高于黑色与黑...