铁路预应力路堤加固技术数值研究

研究目的:铁路预应力路堤在国内外尚属一种新型路基加固法,其受力变形特性暂未得到系统化研究,相关加固设计理论仍处于探索性阶段。因此,有必要通过数值手段了解预应力路堤的工作状态,以掌握其加固性能。鉴于此,借助ABAQUS软件平台构建预应力路堤仿真系统,分析差异化预应力加固参数对路堤变形和承载能力的影响以及预应力加固构件的受力特征。研究结论:(1)路堤本体段坡面较优加固位置为距本体顶面以下0.3倍本体高度处;(2)坡率1∶1的预应力路堤在第1、2排侧压板分别施加50 k Pa、100 k Pa预压荷载时,其变形与承载力均可达传统路堤(坡率1∶1.5)水平,并可通过提升加固标准进一步强化路堤承载性能;(3)当对第1、2、3排侧压板分别施加50 k Pa、100 k Pa、100 k Pa预压荷载时,路堤内部附加围压S11>13.5 k Pa区域大致呈"x"形分布并形成横贯路堤的"预压加固区";(4)侧压板锚固区受力集中且复杂,应注意保障锚固区板体强度;(5)力筋在路堤加载前后的应力变化量与坡面侧向变形特征相关;(6)本研究成果可为铁路预应力路堤的加固设计提供技术指导。     

考虑游览船运营特征的航道通过能力评价方法

为构建客货船舶协同动态运行控制技术体系，以经典航道通过能力模型为基础，构建基于游览船运营特征(发船高峰性和航线集中度)的航道通过能力模型.根据黄浦江游览核心区船舶自动识别系统(AIS)数据，对所提出的航道通过能力模型进行实证分析.研究结果表明，本文航道通过能力模型能够较为准确地评价研究区域的实际航道通过能力.游览船发船高峰时期与现有航线规划条件下，黄浦江游览核心区航道通过能力(76艘/h)趋近饱和状态；当过境船到达超过69艘/h时，建议海事相关部门采取“错峰”航行等相关政策.     

Airport capacity increase via the use of braking profiles

Many airports are encountering the problem of insufficient capacity, which is particularly severe in periods of increased traffic. A large number of elements influence airport capacity, but one of the most important is runway occupancy time. This time depends on many factors, including how the landing roll procedure is performed. The procedure usually does not include the objective to minimize the runway occupancy time. This paper presents an analysis which shows that the way of braking during landing roll has an essential impact on runway throughput and thus on airport capacity. For this purpose, the landing roll simulator (named ACPENSIM) was created. It uses Petri nets and is a convenient tool for dynamic analysis of aircraft movement on the runway with given input parameters and a predetermined runway exit. Simulation experiments allowed to create a set of nominal braking profiles that have different objective functions: minimizing the runway occupancy time, minimizing noise, minimizing tire wear, maximizing passenger comfort and maximizing airport capacity as a whole. The experiments show that there is great potential to increase airport capacity by optimizing the braking procedure. It has been shown that by using the proposed braking profiles it is possible to reduce the runway occupancy time even by 50%.     

A capacity maximization scheme for intersection management with automated vehicles

With the advent of connected and automated vehicle technology, in this paper, we propose an innovative intersection operation scheme named as MCross: Maximum Capacity inteRsection Operation Scheme with Signals. This new scheme maximizes intersection capacity by utilizing all lanes of a road simultaneously. Lane assignment and green durations are dynamically optimized by solving a multi-objective mixed-integer non-linear programming problem. The demand conditions under which full capacity can be achieved in MCross are derived analytically. Numerical examples show that MCross can almost double the intersection capacity (increase by as high as 99.51% in comparison to that in conventional signal operation scheme).     

对地铁信号系统列车运行速度制约因素的探讨

信号系统是保障地铁运行安全及提高运行效率的重要设备,列车超速防护功能是信号系统一个非常关键的功能。信号系统防护下的列车运行速度由车辆、线路、轨道、限界及信号系统等条件共同决定。由于相关专业对信号系统安全制动模型不了解,在实际工程中易造成"速度浪费"现象。从信号系统安全制动模型的原理出发,对车辆、线路、轨道、限界等专业对列车运行速度的制约因素进行分析,提出建议。     

泥浆悬浮砂粒能力分层测定试验研究

为实现泥浆悬浮砂粒能力的量化分析,提出一种分层测定方法,选取12%、15%和18%3种质量分数的试验泥浆,通过自行设计的分层取样装置进行试验研究,获取不同泥浆质量分数、沉降时间和砂粒粒径条件下的10个深度分段的砂粒质量分布,分析各参数影响下的砂粒沉降变化规律。结果表明:1)该分层测定方法可较好地获取不同深度分段的砂粒质量,弥补现有测定方法只能获取底层砂粒沉降质量的不足;2)试验所采用的3种质量分数的泥浆对0.1 mm以上粒径的砂粒悬浮能力均较差。根据砂粒沉降曲线分布特征,提出一种用于判别泥浆悬浮砂粒能力的方法,即砂粒沉降曲线越平缓,各层质量差异性越小,底层质量无明显拐点,不同沉降时间曲线越紧密,则泥浆悬浮砂粒能力越强。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

柴油机减压-排气复合缓速匹配试验研究

通过对柴油机独立减压缓速、排气缓速性能进行研究,获取了二者在循环工作过程中的作用区域和性能提升的影响因素,并以此为基础,组合二者最优方案形成了复合缓速系统,进一步分析独立缓速性能改进方法在复合缓速中的适用性,通过试验验证了改进策略的有效性。研究结果表明,复合缓速是一种有效的辅助缓速装置,合理匹配后可在柴油机运转转速范围内获得与柴油机标定功率相等的制动功率,同时柴油机排温仍然可控制在限值范围内。     

公交通行能力约束的智能调度优化模型

公交通行能力是解决城市交通拥堵问题、促进城市公共交通系统高效运行的要素之一。介绍了公交通行能力的计算要素,并针对目前我国城市由于盲目调度造成的公交系统运营效率、服务水平下降的问题,提出将公交通行能力作为约束条件对公交调度进行优化。鉴于公交企业制订调度方案时需兼顾公交服务水平和企业效益,将智能调度的目标确定为候车时间满意度、候车空间满意度、车内舒适满意度和企业满意度加权平均值最大,并给出了相应的计算方法。最后讨论了利用遗传算法对模型进行求解的过程。     

平交路口远引掉头设置方法分析

平交路口远引是解决路口流向禁限后车流转向问题的有效方法。通过对掉头地点的选址规划以及交叉口之间的协调控制进行研究,提出最佳掉头位置应满足的条件以及交叉口协调控制的相位差计算方法。通过对掉头通道通行能力的分析,提出实施掉头信号控制条件和具体实施方法。